Product Manual A

FIGURE 1

Join the 2 Bridge Bases (A) together with the 3 Bottom Connecting Boards (F),

face inside, use 14 sets of small bolt, nut and washer (K) 12 sets for each end

of the 3 Connecting Boards (F) and 2 sets for center of middle Connecting Board.

Unpack all parts on a clean and soft surface to prevent scratching of wood.

Keep this wood product away from fire and sharp objects.

Solid wood such as this has knots and cracking which are normal and

which should be considered an enhancement to the natural beauty of

the product.

Cedar Bridge with Solar Lights Assembly Instructions

Model #: KMG10058-SL

HOW TO ASSEMBLE

PAGE 1
Cedar Bridge with Solar Lights Assembly Instructions Model #: KMG10058-SL HOW TO ASSEMBLE K K K K A F F F A K ! Unpack all parts on a clean and soft surface to prevent scratching of wood. ! Keep this wood product away from fire and sharp objects. K FIGURE 1 ! Solid wood such as this has knots and cracking which are normal and which should be considered an enhancement to the natural beauty of the product.
PAGE 2
L L G L L J FIGURE 4 FIGURE 2 Attach the center plate (G) on the Connecting Part of 2 Bridge Bases (A) with 6 pieces of screws (L) as shown. Attach the Posts to the Bridge Base (A) together with 8 pieces of bolt, nut and washer sets (I) and (J). Use 2 sets of large bolt, nut and washer (I) for each center post and use 1 set of medium bolt, nut and washer (J) for each end post. Secure the posts and rails to each other with 16 pieces of screws (L) and tighten all of the bolts and screws.