Warranty

ManualsBrandsStonepoint LED Lighting ManualsArea Lights2500-Lumens Gray Outdoor Integrated LED Area Light with Dusk to Dawn Activation

Rev011817

Dusk to Dawn Security Light

Model: 1BL-L2500D/1BL-L4000D

Please read all instructions thoroughly and carefully prior to installing this product. Retain these instructions for future

reference.

Failure to follow these instructions could result in voiding the product warranty. Keystone Group assumes no liability or

responsibility for claims arising from improper installation or improper use.

For questions in regard to the warranty of this product, contact us at 303.652.6164 or email us at info@keystonegroupusa.com

READ FIRST: IMPORTANT SAFETY INSTRUCTIONS

Before you begin installing, servicing, or maintenance of this product, follow these general precautions.

• To reduce the risk of death, personal injury or property damage from fire, electric shock, falling parts, cuts/abrasions

and other hazards, please read all warnings and instructions included with and on this product prior to installation.

• For residential installation: If you are unsure about the installation or maintenance of this product, consult a

qualified licensed electrician.

• This product is intended to be used outdoors and be subject to the elements; such as rain and snow. We recommend

it to be mounted at least 8’ off the ground

• This LED product must be powered directly to a switched circuit.

• Make sure that installation surface is structurally sound and that it will support the weight of this fixture

• This product is intended to be connected to a properly installed and grounded UL listed junction box.

WARNING: RISK OF ELECTRICAL SHOCK

• Turn off electrical power at fuse or circuit breaker box before wiring product to the power supply.

• Verify the supply voltage is correct before installing (110-240v).

• Make all electrical and grounded connections in accordance with the National Electric Code and any applicable local

code requirements.

• All wiring connections should be capped with UL listed wire connectors (included).

CAUTION: RISK OF PRODUCT DAMAGE

• Never connect fixture with the power on.

• Do not mount or support product in a manner that can cut the outer wire jacket or damage the wire insulation.

• Never connect an LED product directly to dimmer packs, occupancy sensors, timing devices, or other related control

devices, unless individual product specifications deem otherwise.

• LED products are polarity sensitive, ensure proper polarity before installation

• Electrostatic Discharge (ESD) can cause damage to LED products. Wear personal grounding equipment during

installation and service of product.

• Do not touch the individual electronic components, it may cause ESD (Electrostatic Discharge), shorten lamp life or

alter performance.

Summary of content (4 pages)

PAGE 1
Dusk to Dawn Security Light Model: 1BL-L2500D/1BL-L4000D Please read all instructions thoroughly and carefully prior to installing this product. Retain these instructions for future reference. Failure to follow these instructions could result in voiding the product warranty. Keystone Group assumes no liability or responsibility for claims arising from improper installation or improper use. For questions in regard to the warranty of this product, contact us at 303.652.
PAGE 2
CAUTION: RISK OF INJURY • • • Avoid direct eye exposure to the light source while it is on. THIS MAY CAUSE IRREPARABLE DAMAGE TO THE EYES. Please dispose of packaging materials and account for all small parts as these can be hazardous to small children. WARNING: RISK OF BURN • • Allow fixture to cool completely before handling. Do not touch enclosure of light source. Keep combustible and other materials that can burn away from the light, lamp, and lens.
PAGE 3
MOUNTING AND WIRING THE LIGHT NOTE: DO NOT MOUNT ON THE GROUND, RECOMMENDED INSTALLATION HEIGHT IS BETWEEN 8 AND 12 FEET 1. 2. 3. 4. 5. 6. 7. Turn off power from the circuit breaker box. DO NOT rely on only the switch power being turned off. Unscrew the two (2) Fixture cover plate Screws (D) and remove the Fixture cover plate (C). The fixture cover plate contains two (2) punch metal punch outs. If you are completing a wall installation remove the back punch out.
PAGE 4
PRODUCT SPECIFICATIONS • • • • • Color Temperature: 4000K +/- 10% LED Angle: 120° Operating Voltage: 110 - 240 volts IP Rating: 65 Operating Temperature: -40° ~ 122° F TROUBLE SHOOTING If the light does not come on: ➢ Verify the power is turned on at the switch and breaker ➢ Verify that the product is properly wired ➢ Verify that the line voltage is correct (110-240v) PRODUCT MAINTENANCE To clean the surface of the light, use mild soap and water.