User's Manual

STONEX R2 PLUS

2.1.2 Replace the Battery

1) Remove the battery

① Press the button downward as shown left

② Remove the battery by pulling it toward you

2) Mount the battery

① Insert the battery to the instrument

② Press the top of the battery until you hear a

Click.

2.1.3 Recharge the Battery

As above figures show, connect the charger and the battery, then plug the charger

into the outlet of 110V-220V AC power supply, recharging will begin.

NOTE:

◆ For a new (or long time no use) battery, in order to fully extend its capacity,

it is absolutely necessary to carry out 3 to 5 complete charging/discharging

cycles, and the charging time must be 10 hours at least each time.

◆ The indicator light on the charger will illuminate three separate colors for

varies mode conditions:

Solid Red Light—indicates that the charger is working;

Solid Green Light— indicates that the charge has finished;

Flashing Red Light—indicates no battery on charging, poor connection or some

problems exist.

◆ It is recommended to continue charging for 1 or 2 hours after the light turn

green.

◆ Once the red light flashes constantly after the charger is plugged into the

outlet of 110V-220V AC power supply, please remove the battery and

reconnected it after 3 or 5 min.