User's Manual

STONEX R2 PLUS
16
3.6 How to Configure
Press key {★} on panel directly to enter into in any
status, and do some basic settings.
1. Backlight
Press numeric key {
1}, then press left key { } or
right key { } to turn on or not.
2.Laser pointer on/off
Press numeric key {
2}, then press left key { } or
right key { } to turn on/off telescope laser pointer.
3. LCD contrast
Press numeric key {
3}, then press left key { } or
right key { } to adjust it.
4. Reticle level
Press numeric key {
4}, then press left key { } or
right key { } to adjust it. If the value is zero, the
illumination is turned off.
5. Key beep
Press numeric key {
5}, then press left key { } or
right key { } to turn on key beep or not, if you select
NO, you will not hear the beep voice when press the
key.
6. EDM returned Signal
Aim at a target, then press numeric key {6} and the
instrument will beep, the EDM returned signal value
will display simultaneously.
7. EDM setting menu
Press function key {F1} to open the EDM setting
menu.
Inst Config
1.Backlight : YES
2.Laser :NO
3.LCD contrast :5
4.Reticle lev :7
5.Key Beep :YES
6.EDM signal :
EDM
Inst Config
1.Backlight : YES
2.Laser :NO
3.LCD contrast :5
4.Reticle lev :7
5.Key Beep :YES
6.EDM signal :
EDM
Inst Config
1.Backlight : YES
2.Laser :NO
3.LCD contrast :5
4.Reticle lev :7
5.Key Beep :YES
6.EDM signal :
Inst Config
1.Backlight : YES
2.Laser :NO
3.LCD contrast :5
4.Reticle lev :7
5.Key Beep :YES
6.EDM signal :
EDM
Inst Config
1.Backlight : YES
2.Laser :NO
3.LCD contrast :5
4.Reticle lev :7
5.Key Beep :YES
6.EDM signal :26
EDM
Inst Config
1.Backlight : YES
2.Laser :NO
3.LCD contrast :5
4.Reticle lev :7
5.Key Beep :YES
6.EDM signal :
EDM