User's Manual

STONEX R2 PLUS
43
3. Select [
MENU]/4. Offset, or press F3: [OFST] at
P3 of basic measurement menu.
4. Select “
1. Occ. orientation” to input the
instrument occupied data, see Ҥ6.1 Input the
occupied point data”.
5. Select “
2. Offset/Dist”.
6. User could press F1: [
MEAS] to re-measure the
offset point or press F4: [
OK] to the next step.
7. Input distance and direction of offset point:.
① Dist: horizontal distance from the target point to
the offset point.
② Direc: direction of the offset point.
←: on the left of the target point
→: on the right of the target point
↓: in front of the target point
↑: at back of the target point
8. Press F4: [
OK] to calculate and display the distance
and angle of the target point.
9. Press F1: [
REC] to save;
Press F2: [
NEZ] to display NEZ coordinate;
Press F3: [
NO] back to step 6;
Press F4: [
YES] back to offset mode.
Offset/Dist
Dist 10.000m
Direc ↓
MOKS
Offset/Dist
SD 10.186m
VA 90.0000gon
HA 64.5154gon
II
MEAS MOKS
Offset
1.Occ. Orientation
2.Offset/Dist
3.Offset/Angle
4.Offset/2Dist
Offset
1.Occ. Orientation
2.Offset/Dist
3.Offset/Angle
4.Offset/2Dist
Offset/Dist
SD 13.511m
VA 346.9636gon
HA 249.0298gon
REC NEZ M NOS YES