User's Manual

STONEX R2 PLUS

10. MLM

MLM is used to directly measure slope distance, horizontal distance and the height

difference from one base point to other points without moving the instrument.

NOTE:

◆ The last measured data could be set as the base point for the next starting operation.

◆ The height difference between one point and the base point could be displayed as

grade mode.

10.1 Measuring Distance between Two or More Points

【Procedure of measuring】

1. Press F2: [

MENU] at P2 in the measure mode.

Select “

5. MLM”.

2. Aim at the start point P1, then press F4: [

MEAS]

and the measured data will display.

3. Aim at the target point P2 and press F1: [

MLM] to

begin measure, SD, HD, VD will display.

S1 %1

Target (P2)

Start point (P1)

Target (P3)

Occupied point

Menu P1

1.Coordinate

2.Stakeout

3.Area

4.Offset

5.MLM

6.REM

7.Resection

MLM

SD 33.421ft

HD 155.6594gon

VD 355.9246gon

MLM MOVE MEAS