User's Manual

STONEX R2 PLUS
66
17. Polar Coordinates Calculation
The coordinates of the end point could be calculated according to input azimuth, distance
and the NEZ coordinates of start point.
Input:
Coordinate of start point: N0,E0,Z0
Azimuth: Az
Distance: Dist
Output:
Coordinate of end point:N1,E1,Z1
【Procedure of Polarize】
1. Press F2: [
MENU] on P2 of the basic measurement
mode.
2. Turn to P2, select “
5.Polarize”.
3. Input the data in corresponding items. You could
press F1: [
READ] to read the existed coordinate data
for start point. Press F4: [
OK] to enter.
4. The calculated data displays. Press F3: [
REC] to
record it in the list, and press F1: [
OK] back to menu
mode.
N
Start point
End point
D
Az
Menu P2
1.Point projection
2.Line stake out
3.Traverse
4.Inverse
5.Polarize
6.Repeat Measure
7.Arc staking out
Calc polar coord
Pt# C1
N 1000.000
E 1000.000
Z 39.383
Azimuth 1.0000gon
Dist 0.000ft
READ 0OK0
Calc polar coord
N 1000.000
E 1000.000
Z 0.000
0OK0 REC