User's Manual

5
Measurement, Plane Offset Measurement, and
Column Offset Measurement.
Besides, basic measurement is also
appropriate for checking performance
functionality and index of angle measurement
and distance measurement for total station.
1.3.2 Standard Measurement
Function introduction Display
Standard measurement function is used to
resolve and calculate applied measurements
during conventional surveying. It contains
“project management”, “import/export”,
“instrument station setup and orientation”,
“foresight measurement”, “backsight
measurement”, “side-looking measurement”,
“cross-sectional measurement”, “setting out
of point, bunch and alignment”, “road
design”, “traverse adjustment”, “ coordinate
geometry”, “ batter board label”, “steel ruler
connection survey”,“data query and editing”
and so on.
NOTE: This part is optional, it is normal to
display as right figure.
1.3.3 Instrumment Setup
Function introduction Display
Instrument setup function is mainly applied
for instrument settings,instrument calibration
and generation and management of instrument
constant.It is made up of a serie of functions
such as “compensator linear correction”,
“compensator zero correction”, “horizontal
axis error correction”, “index correction”,
“instrument settings”, “distance constant
settings”, “communication port settings”,
“configuration management”,etc.