User's Manual

25
4.3.4 Setting horizontal angle with the “S.Angle” key
Make sure the operation is under angle measurement mode.
Operation steps Keys Display
ķCollimate target point
used for Orientation.
ĸClick “S.Angle” key, and
a dialog box will be ejected,
as is showed in the right
figure.
ĹInput horizontal angle you
need.
Ć 1
Such as˖232°26'26"
ǏS.Angleǐ
input
horizontal
angle
ĺWith data entry completeˈ
click “Enter” key,and angle
measurement after
orientation will go on.
ǏEnterǐ
Ć1 Data entry should be refered to the format shown in the dialog box.