User's Manual

36
4.4.6 Remote Elevation MeasurementďREMĐ
The Remote Elevation program calculates the vertical distance (VD) of a remote object
relative to ground. When using a prism height, the remote elevation measurement will
start from the prism (reference point). If no prism height is used, the remote elevation will
start from any reference point in which the vertical angle is established. In both modes,
the reference point should be perpendicular to the remote object.
1) With prism height (PH) input
Operation steps Keys Display
ķUnder distance
measurement mode, click
“REM” key to activate
remote elevation
measurement.
ǏREMǐ