User's Manual

5
Safety Standards for Laser(R2W-PLUS series)
R2W-PLUS series adopts the safe and visible laser on the basis of “Specification
Standard of radiant products” (FDA CDRH.21CFR Part 1040.10 and 1040.11) and
“Safety of laser products – parts 1: Equipment classification, requirements and user’s
guide” (IEC 60825-1:2001).
According to above standards, R2W-PLUS series is class a/3R laser products. When ċ
the prism or reflective sheet is selected in Config mode as target, the output is equivalent
to the safer class 1.
Once the instrument is damaged, do not disassemble it. You’d better contact STONEX
or local dealer.
Labels
Follow the safety instructions on the labels as well as in this manual to ensure safe use .
Note for Safety
Ɣ Never point the laser beam at other’s eyes, it could cause serious injury.
Ɣ Never look directly into the laser beam source, it could cause permanent eye damage.
Ɣ Never stare at the laser beam, it could cause permanent eye damage.
Ɣ Never look at the laser beam through a telescope or other optical devices, it could cause
permanent eye damage.
ʽ WARNING
Laser emit