User's Manual

Appendix III: Assembling and disassembling for three-jaw

tribrach

It is convenient to assemble or disassemble the instrument from tribrach by

loosen or tighten the tribrach clamp.

Disassemble

(1) Rotate the tribrach clamp anticlockwise until the lever is loosen.

(2) One hand hold up the tribrach, another hand hold the carry handle of the

instrument and lift out the instrument from the tribrach.

Assemble

(1) Put the instrument into the tribrach lightly, let the communication port

against in the indentation of the tribrach..

(2) Rotate the tribrach clamp clockwise until the lever is tighten.

Note: Fix the tribrach clamp

If the instrument don’t need assembly or disassembly from tribrach frequently, it

is necessary to fix the tribrach clamp by fixed screw to avoid the disassembly by

accident.

Screw out the fixed screw by driver to fix the clamp.

Positing block

Positing groove

Tribrach clamp

Fixed screw