User's Manual

Stonex R80 Robotic Total Station - User Manual 30
manually), Auto Aim (to aim it automatically) or Lock
(to remain on the same position). In the righter box,
choose if you are working indoor or outdoor.
• Laser plummet: you can choose between three levels
of laser plummet brightness or to switch it off;
• Laser point: choose if switch it off or on;
• Set:
• EDM.T: is the permitted limiting time for distance
measuring;
• AIM.T: is the permitted limiting time for adjusting
in the course of target recognition, which is related
to collimating instead of the motor
• POS.T: is the permitted limiting time for
positioning, which is related to the motor itself
• Search.T: is the permitted limiting time for
windows searching procedure, to keep it from
repetitive searching
• TIP.S: means the hint sound of positioning, which
can sound twice
• EDM.S: means the hint sound of EDM measuring,
which can sound once
• ADV MD: press on it and the image on the right is
shown.
• Fine Threshold: for the fine measuring threshold
of the EDM device
• Coarse Threshold: for the coarse measuring
threshold of the EDM device
• EDM VerIndex: it's the EDM device version
• Threshold: open or off the threshold function
define.
• Background: open or off the background bitmap
function
• GL FREQ HL: define the guide light function
particularly, adjusting the flashing speed
Battery: dynamic display of battery level
• Cross Light: level the telescope illumination on reticle;
• Guide Light: it could be helpful to the surveyor to adjust
the station and prism positions and to set the prism,
mainly during the stake out. The guide light could be
seen within 100 meters, even if the distance may be
affected by atmospheric conditions and others.