User's Manual
Table Of Contents
- 1. Precautions for safety
- 2. Nomenclature
- 3. Preparation before measurement
- 4. Basic functions
- 5. Instrument settings
- 6. Measurement
- 7. Data management
- 8. Check and adjustment
- 9. Technical features
- 10. Kit components
- Appendix I: Atmospheric correction formula and chart
- Appendix II: Correction for refraction and earth curvature
- Appendix III: Technical drawing
- Limited warranty standard
- Environmental recycling
Stonex R80 Robotic Total Station - User Manual 33
6. Measurement
6.1. Angle measurement
Select the [M. Angle] icon to operate under angle
measurement mode. The vertical and horizontal angles are
displayed.
6.1.1. Measure a horizontal angle between two points
Collimate the first target.
Set horizontal angle as zero for the first target, clicking the
[S.Zero] button, and choose “Yes” in the popup dialog box.
Collimate the second target, and the horizontal angle and
vertical angle will display on the screen of instrument.
2nd target
1st target