User's Manual
Table Of Contents
- 1. Precautions for safety
- 2. Nomenclature
- 3. Preparation before measurement
- 4. Basic functions
- 5. Instrument settings
- 6. Measurement
- 7. Data management
- 8. Check and adjustment
- 9. Technical features
- 10. Kit components
- Appendix I: Atmospheric correction formula and chart
- Appendix II: Correction for refraction and earth curvature
- Appendix III: Technical drawing
- Limited warranty standard
- Environmental recycling
Stonex R80 Robotic Total Station - User Manual 42
In the case you select the “N Fine” mode, input the number
of needed observations in the “Count” space.
The selected mode appears on the right upper side of the
screen.
Click on [M.Dist] or [M.E] to start measuring the distance. The
results of measurement are displayed.
To end measuring press [Stop].
When you preset the measuring times, the instrument will carry out distance measurement and display the
average distance according to the setting times. If you preset single observation (Fine mode), the average distance
won’t be displayed, but the distance comes out from a single measure.