User's Manual
Table Of Contents
- 1. Precautions for safety
- 2. Nomenclature
- 3. Preparation before measurement
- 4. Basic functions
- 5. Instrument settings
- 6. Measurement
- 7. Data management
- 8. Check and adjustment
- 9. Technical features
- 10. Kit components
- Appendix I: Atmospheric correction formula and chart
- Appendix II: Correction for refraction and earth curvature
- Appendix III: Technical drawing
- Limited warranty standard
- Environmental recycling
Stonex R80 Robotic Total Station - User Manual 45
6.3.3. Setting instrument and prism heights
Coordinate measurement must be based on instrument height and prism height, thus coordinate of unknown
point can be calculated easily and directly.
Click [Setup] key.
Input instrument height (IH) and prism height (PH).
Finishing data entry, click “Enter” key to return to coordinate
measurement screen.