User's Manual
Table Of Contents
- 1. Precautions for safety
- 2. Nomenclature
- 3. Preparation before measurement
- 4. Basic functions
- 5. Instrument settings
- 6. Measurement
- 7. Data management
- 8. Check and adjustment
- 9. Technical features
- 10. Kit components
- Appendix I: Atmospheric correction formula and chart
- Appendix II: Correction for refraction and earth curvature
- Appendix III: Technical drawing
- Limited warranty standard
- Environmental recycling
Stonex R80 Robotic Total Station - User Manual 54
Collimate prism P1, and click [Measure] key.
Collimate prism P2, and click [Measure] key.
Collimate prism P3, and click [Measure] key.
Click [Continue] key to calculate relational values between
collimation axis and plane.
NOTE:
• If the three observing points can’t determine a plane, the system will display error message. Thus observe
the first point once again.
• When collimation axis doesn’t intersect with determined plane, the system will display error message.