User's Manual
Table Of Contents
- 1. Precautions for safety
- 2. Nomenclature
- 3. Preparation before measurement
- 4. Basic functions
- 5. Instrument settings
- 6. Measurement
- 7. Data management
- 8. Check and adjustment
- 9. Technical features
- 10. Kit components
- Appendix I: Atmospheric correction formula and chart
- Appendix II: Correction for refraction and earth curvature
- Appendix III: Technical drawing
- Limited warranty standard
- Environmental recycling
Stonex R80 Robotic Total Station - User Manual 57
7. Data management
The file in the instrument could be read through:
• Windows mobile device center software by USB cable;
• External memory stick trough USB host connector. The file in the external memory stick could be read in
the instrument interface.
7.1. USB cable
Install Windows mobile device center software on your PC
1
.
Connect the instrument to PC through the cable.
The total station is visible as “Devices and drivers” in “This PC”.
7.2. USB dongle connection
Proceed with the following instructions:
1） At any interface, press [ESC] key to return the “Welcome
interface” screen.
2） Select [Exit] icon
3） A dialog box is ejected requiring if turn off: Select [No]
1
You can find the setup inside the USB dongle that you find in the carrying case