User's Manual
Table Of Contents
- 1. Precautions for safety
- 2. Nomenclature
- 3. Preparation before measurement
- 4. Basic functions
- 5. Instrument settings
- 6. Measurement
- 7. Data management
- 8. Check and adjustment
- 9. Technical features
- 10. Kit components
- Appendix I: Atmospheric correction formula and chart
- Appendix II: Correction for refraction and earth curvature
- Appendix III: Technical drawing
- Limited warranty standard
- Environmental recycling
Stonex R80 Robotic Total Station - User Manual 9
2.2. Keyboard
R80 series is equipped with two color touch screens and alphanumeric keypad, operation by both touching screen
and pressing keyboard is possible.
Do not touch the screen with ball-pen, pencil or other sharp thing to avoid damage on instrument.
Keys
Name
Functions
0~9/ A~!
Alphanumeric keypad
Enter text and numerical values.
α
Shift key for character entry
The current entry method can shift among number, smaller
letter and capital letter.
★
Star key
Normal configurations can be set here
B.S
Back Space key
Move the cursor left and delete one character
S.P
Space key
Enter the space
ENT
Enter key
Confirm an entry or selection
ESC
Escape key
Quit a screen or edit mode without saving changes. Return
to next higher level
SFT
Shift key
Perform variable functions defined by program screen
FNC
Function key
Perform variable functions defined by program screen
◄▲▼►
Navigation key
Control the focus bar within the screen and the entry bar
within a field
Power key
Turn on/off the instrument
F1-F8
Function keys
Refer to 5.2.6. Key settings to assign functions to these keys