User's Manual

STONEX SLAM XH120 – User Manual

5. Taking out the battery: it is not suggested to take out the battery when the instrument is on.

Otherwise, stored data may be lost. So, it is better to replace the battery after powering off the

instrument.

6. High temperature condition: don’t put the instrument in high temperature condition for a long

time, it is bad for the instrument performance, and it can damage the hardware components.

7. Noise from the instrument: when the instrument is working it is normal if you hear noises from

instrument motors. They will not affect the instrument work.

8. Stored data responsibility: STONEX® should not be held liable for the lost data because of wrong

operation.

3.4 Transport and shipping

TRANSPORT IN THE FIELD

1. When transporting the equipment in the field, always make sure that you

a. either carry the product in its original transport container,

b. or carry the processing unit with the strap across your shoulder, and the handheld part

firmly held.

TRANSPORT IN A ROAD VEHICLE

2. Never carry the product loose in a road vehicle, as it can be affected by shock and vibration.

3. Always carry the product in its transport container and secure it.

SHIPPING

4. When transporting the product by rail, air or sea, always use the complete original STONEX®

packaging, transport container and cardboard box or its equivalent to protect the instrument

against shock and vibration.

SHIPPING AND TRANSPORT OF BATTERIES

5. When transporting or shipping batteries, the person in charge of the product must ensure that

the applicable national and international rules and regulations are observed.

6. Before transportation or shipping, contact your local passenger or freight transport company.

3.5 Storage

Respect the temperature limits when storing the equipment, particularly in summer if the equipment is

inside a vehicle. Refer to technical datasheet for information about temperature limits.

3.6 Cleaning and drying

• Never touch the cover glass with your fingers.

• Use only a clean, soft, lint-free cloth for cleaning.

• If necessary, moisten the cloth with water or pure alcohol. Do not use other liquids.

• Keep plugs clean and dry. Blow away any dirt lodged in the plugs of the connecting cables.

3.7 Definition of indication

For the safe of your product and prevention of injury to operators and other persons as well as prevention

of property damage, items which should be observed are indicated by an exclamation point within a

triangle used with WARNING and CAUTION statements in this manual.