User's Manual

STONEX SLAM XH120 – User Manual

4. Make sure all these parts are connected/inserted firmly.

4.2 Battery charging

1. Plug the charger into an AC power source and the charger LED indicator will light up in green

2. Insert the charger wire firmly into the battery, and the four LED indicators above the battery will

flash in sequence. When the four indicators are no longer flashing, the battery is fully charged

3. Disconnect the charger from the battery and AC power source

4. After the battery is fully charged, do not keep the charger connected to the battery for a long time

4.3 Real-time battery display

The four LED indicators placed on the battery light up to indicate about 25%, 50%, 75%, or 100% of the

remaining power of the battery.

4.4 XH120 control options

To perform the data acquisition, to manage scans, and to download the results, the system uses Cube-

slam, a software which applies the SLAM algorithm to obtain ready-to-use 3D point clouds at the time of

scanning.

The software and calculation operations are carried out entirely within the system, but it is possible to view

and control the various acquisition and management steps using a Windows PC or tablet. To interact with