User's Manual

STONEX SLAM XH120 – User Manual
15
the scanner via Cube-slam and check in real-time the progress of the scan and remapping steps, the user
needs to install the launcher on your device, following the steps below.
It is also possible to control the scanner by connecting to the web interface, which can be accessed by
reaching IP 192.168.10.1. This allows to perform scanning, remapping and download of the data using
any device with an internet browser.
4.5 Installing Cube-slam
1. Read the USB dongle provided with the instrument on your device
2. Unzip the Cube-slam folder
3. Copy the “opt” folder in your PC C: drive
4. Run the “setup.bat” file as administrator (right click on the file and select “Run as administrator”)
to install the software and follow the command window instructions
5. To verify the correct installation of Cube-slam, connect your PC to the instrument network
6. Start Cube-slam by clicking on the “Cube-slam” application file inside the unzipped folder
7. Cube-slam main window should appear, with the connection status “Connected”.
4.6 Installing XH120 Manager
1. Read the USB dongle provided with the instrument on your device
2. Unzip the XH120 manager folder
3. Click on the application file inside the unzipped folder to start the converter