Owner's manual

Clickfree Portable Backup Drive for Macintosh: User Guide Advanced topics

WHAT DO I DO IF CLICKFREE DOESN’T START AUTOMATICALLY?

If Clickfree does not run when you plug in the Clickfree Portable Backup Drive:

• If you are connecting the Portable Backup Drive to a USB hub (which could be in

your monitor or keyboard), the hub may not provide enough power for a

Portable Backup Drive.

Try connecting to a USB port on the computer itself, or connect the second USB

plug (marked “Power only”) in to the hub also.

As an alternative, you can use an external power supply for the drive: 5V,

minimum 1.5A, with tip positive/outer ring negative. (Please call

Clickfree

customer care for more information about obtaining an external power supply.).

• Ensure you are using a supported Mac computer: OSX Leopard 10.5 or higher,

Intel based.

• Ensure that you have administrative rights to the computer.

Clickfree still does not run ,contact Clickfree support.