Assembly Instructions

Bulk Rack

fig.1

fig.2

fig. 3

fig.4

fig.5

fig.7.1

fig.7.2

fig.7.3

fig.6

10’ - 12’ Model 6’ - 8’ Model 3’ Model

STEP 1 - Ensure all pieces are present:

3’H Set: 4UprightPosts( ig.1)

4HorizontalSupports(g.2)

2DiagonalSupports(g.3)

6’H ~ 8’H Set: 4UprightPosts(g.1)

6HorizontalSupports(g.2)

4DiagonalSupports(g.3)

10’H ~ 12’H Set: 4UprightPosts(g.1)

8HorizontalSupports(g.2)

6DiagonalSupports(g.3)

*Optional Foot Plates: 1peruprightpost(g.4)

STEP 2 - Position Upright Posts:

Placetwouprightpostsontheoorandensurebothuprightsare

coordinatedwithteardropsinthesamedirection(g.5)

STEP 3 - Install Horizontal Supports:

Horizontalsupportsaretheshortersupportsandcanbeidentiedby

measurementsthatarestampedontothebarinmm(g.6).Inserthorizontal

supportsintheindicatedspotsasshowninFigures:7.1,7.2,and7.3.Use

asocketwrenchtoturnsuppliedboltsintothenutswhileholdingthenutsin

placewithacrescentwrench(g.8).

fig.8

PAGE 1
Bulk Rack Assembly Instructions fig.1 STEP 1 - Ensure all pieces are present: 3’H Set: 4 Upright Posts ( ig. 1) 4 Horizontal Supports (fig. 2) 2 Diagonal Supports (fig.3) fig.2 fig. 3 6’H ~ 8’H Set: 4 Upright Posts (fig. 1) 6 Horizontal Supports (fig. 2) 4 Diagonal Supports (fig.3) 10’H ~ 12’H Set: 4 Upright Posts (fig. 1) 8 Horizontal Supports (fig. 2) 6 Diagonal Supports (fig.3) fig.4 *Optional Foot Plates: 1 per upright post (fig.
PAGE 2
fig.9.1 fig.9.2 STEP 4 - Install Diagonal Supports: Install diagonal supports in the appropriate locations indicated in Figures: 9.1, 9.2, and 9.3. Supports need to be installed in opposite directions as shown in the diagrams appropriate for your unit size. fig.9.3 10’ - 12’ Model 6’ - 8’ Model 3’ Model fig.10 STEP 5 - Install Optional Foot Plates: Foot plates are installed to the bottom of each upright post (fig. 10).