Owner manual

InfoStation User Interface 23
InfoStation 14-Bay U320 User's Guide - Rev. A00 StorCase Technology, Inc.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Setup.
3. Press ENTER so that display = Enc. ID.
4. Press DOWN until display = FanSpeed.
5. Press ENTER so that display = FANSPD=x.
This is the current blower speed level.
6. Press UP or DOWN to change the blower speed
level.
7. Press ENTER to accept the change.
ENTER
S t a t u s
S e t u p
T E M P : x x C
E n c . I D
ENTER
DOWN
ENTER
DOWN
F a n S p e e d
F A N S P D = 0
UP/DOWN
ENTER
F A N S P D = 3
F A N S P D = 3
Changing the Blower Speed
The following steps show how to change the InfoStation blower speed.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default
Display. The menu system will automatically cancel after 15 seconds of
User inactivity.