Owner's manual

InfoStation User Interface 19
InfoStation User's Guide - Rev. B01 StorCase Technology, Inc.
SAF-TE Processor Board SCSI ID Set-Up
NOTE: Only necessary if the optional SAF-TE processor board is installed.
The following steps show how to change the SAF-TE processor board SCSI ID.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
NOTE: The SAF-TE processor board SCSI ID can be changed anytime. However, it will only
take effect after a system power up.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = SAFT Cfg.
3. Press ENTER so that display = SCSI ID.
4. Press ENTER again so that display = SAFT1:xx.
This is the current SAF-TE SCSI ID.
5. Press UP or DOWN to change the SAF-TE pro-
cessor board SCSI ID.
6. Press ENTER to accept the change.