Owner's manual

InfoStation User Interface 23
InfoStation User's Guide - Rev. B01 StorCase Technology, Inc.
Changing the Fan Speed
The following steps show how to change the InfoStation fan speed.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Setup.
3. Press ENTER so that display = Alarm.
4. Press DOWN until display = FanSpeed.
5. Press ENTER so that display = FANSPD=x.
This is the current fan speed level.
6. Press UP or DOWN to change the fan speed
level.
7. Press ENTER to accept the change.