User Manual

InfoStation User Interface 13
InfoStation User's Guide - Rev. A01 StorCase Technology, Inc.
Blower Module Status
The following steps show how to access InfoStation blower module status information.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press ENTER again until display = Temp.
3. Press DOWN until display = Fan.
4. Press ENTER until display = FAN1:OK (or
FAN1:ERR).
This is the current status reading for Fan 1.
5. Press DOWN to scroll through and view the
status of each fan.
NOTE: FANx:ERR indicates an error with the respective fan!
Press ENTER after each individual fan status reading to view a detailed message
regarding fan condition. A detailed message will scroll across the display regardless
of fan condition.