User Manual

22 InfoStation User Interface
StorCase Technology, Inc. InfoStation User's Guide - Rev. A01
SAF-TE Module SCSI ID Set-Up
The following steps show how to change the SAF-TE module SCSI ID.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
NOTE: The SAF-TE SCSI ID can be changed anytime. It will only take effect after a
system power up.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = SAFT Cfg.
3. Press ENTER until display = SCSI ID.
4. Press ENTER again until display = SAFT1:xx.
This is the current SAF-TE SCSI ID.
5. Press UP or DOWN to change the SAF-TE SCSI
ID.
6. Press ENTER to accept the change.