User guide

4 Introduction
StorCase Technology, Inc. InfoStation 9-Bay User's Guide - Rev. C02
 Bay Identify LED(s) - Indicate that the drive bay is currently being selected for
SCSI ID set-up (via the UI Module).
 Drive Bay LED(s) - Provides the following information:
Drive Ready - Indicates that the drive is properly installed and
ready for access.
Drive Activity - Indicates that the drive is being accessed.
Drive Fault - Indicates a drive failure.
 Key Lock(s) - Assure proper seating of the drive carrier within the chassis and
prevent unauthorized removal or installation of the carrier.
NOTE: The key lock is only to prevent unauthorized removal or installation of the
drive carrier. Locking the key lock is not required for drive carrier oper-
ation.
 Insert/Remove Push Button(s) - Allow the drive carrier(s) to be removed and
installed at anytime (Refer to the InfoStation Installation Guide for further infor-
mation).
 Chassis Handle(s) - Provide a sturdy grip for the installation and removal of the
rack-mount chassis.
Figure 2: InfoStation Front Panel
IFS9_4
UI
Module
Chassis
Handle
Bay Identify
LED
Insert/Remove
Push Button
Drive Carrier
Handle
SCA Drive
Carrier
Key
Lock
Drive
Ready
Drive
Activity
Drive
Fault
LEDs