User guide

Dual RAID Module User's Guide - Rev. A03 StorCase Technology, Inc.
Configuration 83
Rebooting the Controller
This function allows the user to shut down and restart the controller after making certain
configuration changes (or hardware changes). A normal shutdown ensures that the write-
back cache has been flushed to the disk.
CAUTION: Any user accessing an array while the controller is shutting down will lose
access and possibly data as well!
To shut down and restart the controller:
1. Select Shutdown/Restart from the System Menu and press Enter.
The system will confirm your request to shutdown the controller.
2. Select Yes and press Enter.
3. Press Enter to reboot.
The system will perform a self-test. The controller is ready when the Disk Array
Administrator boot-up screen displays (refer to section "Starting the Disk Array
Administrator Utility" for further information).
Changing the Date and Time
This function allows the user to change the controller's date and time.
To set the date:
1. Select Configuration Menu from the System Menu and press Enter.
The Configuration Menu should now display (Figure 31).
2. Select Set Date/Time and press Enter.
The Set Date/Time Menu should now display (Figure 55).