User guide

StorCase Technology, Inc. DE100i-S User's Guide - Rev. H00
20 Appendix B - Factory-Installed Options
Figure B-2: Hot Swap Board Jumper Options
3. As the unit number flashes, the Hot Swap Board monitors the activity of the SCSI bus.
When activity is no longer present, the Hot Swap Board will remove power from the
drive and then remove the device from the SCSI Bus. The unit number will continue
to flash during this period.
4. After a short length of time the unit display will turn from a flashing unit number to a
steady u, indicating that the device is powered down, unlocked and ready to be
removed from the receiving frame.