User guide

20 Appendix C - Field-Replacing the Carrier Fan
StorCase Technology, Inc. Ultra320 DE110 User's Guide - Rev. A03
1. Carefully uninstall drive (if still installed in carrier). Refer to section "INSTALLATION"
for further information.
2. Loosen and remove the four (4) #6-32 Phillips Flat Hd. screws securing the front
assembly to the carrier (Step 1 of Figure C-1). Carefully remove the front assembly.
3. Uninstall the faulty fan by removing the two (2) Philips Pan Hd. screws securing the
fan to the carrier (Step 2 of Figure C-1).
4. Carefully disconnect the fan power cable (Step 3 of Figure C-1).
5. To install the new fan, simply reverse above mentioned steps.