Use and Care Manual

4 ∙ important safeguards
IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should be followed,
including:
PLEASE READ AND SAVE THIS
INSTRUCTION AND CARE MANUAL
• Read all instructions.
• Remove all bags and packaging
from appliance before use.
• Wash and dry Electric Multi-Pot
before using for the rst time.
• Make sure that the Multi-Pot and
Power Cord are completely dry
before each use.
• Always attach the Power Cord to
the appliance rst before plugging
it into the wall outlet. When
turning off the Multi-Pot, turn the
Temperature Dial all the way to the
left and then remove the Power
Cord from the wall.
• Prior to rst-time use, boil water in
the Multi-Pot, then pour it out. This
will eliminate any odors.
• For maintenance other
than cleaning, please contact
StoreBound directly at
1-800-898-6970 from 7AM – 7PM
PST Monday – Friday or by email
at [e-mail].
• To prevent the risk of re, electric
shock, or personal injury, do not
place the cord, plug, or unit near
water or other liquids.
• WARNING: To avoid electric shock,
do not overll the Multi-Pot. Water
level should never go above the
Max line.
• Do not operate any appliance with
a damaged cord or plug.
• WARNING: Hot steam! Never
place your hands or arms over the
Steam Hole or Strainer Spout while
the appliance is in use.
• Take special care when removing
the Lid as escaping steam may
cause personal injury.
• Do not touch hot surfaces. Use
handles or knobs.
• To prevent personal injury, do not
touch the surface of the Electric
Multi-Pot during or following use.
Allow appliance to cool.
• Never immerse the Multi-Pot in
water or any other liquid; instead,
wipe the surface with a soft, damp
cloth and properly clean inside
of Multi-Pot (see the Cleaning
& Maintenance section in this
manual).
• Never leave appliance unattended
when in use.
• Do not use the appliance if any of
the parts are damaged.
• Children should be supervised to
ensure that they do not play with
the appliance.
• Always be sure to unplug the
appliance from outlet prior to
assembly, disassembly, cleaning,
and storage.
• Allow Multi-Pot to cool completely
before moving, cleaning, or
disassembling.