User's Manual

2
• Set the output to (default) to use stereo headphones with your TV or receiver.
Then set the input to (your mic) and you can chat while wearing stereo
headphones. Keeping the mic close to your face could be a problem since both
ears are already taken! You could try a USB desktop mic and see if that works. I
will add info on that as it comes in.
For more help you can try the links below:
• Playstation 3 Users Guide-
http://manuals.playstation.net/document/en/ps3/current/index.html
Function Actions Result
Power On From Off state, press and hold Power
Button for 2s
Blue LED flashes 3x; follows by medley
tone.Device goes to standby mode,
Blue LED
continues flashing every 4s
Power Off In standby, press and hold Power button for
5s
Red LED flashes 3x; follows by medley
tone
1. In standby, press and hold Power button
& Vol- for 2s
Blue LED flashes 3x; follows by
Red/Blue
flashes alternatively for 2mins
2. Perform device discovery from PS3
3. Search devices from PS3 It may take a few seconds to discover
all
devices within vicinity
4. Select device from PS3 It may take a few seconds to make
connection
Pairing
5. Enter passkey “0000”, then “OK” to pair
the
headset with the PS3
The device ID is stored in the PS3
device listing. Blue LED flashes 3x
indicates pairing
success
Pairing
Failed/Timeout
Devices not paired within 2mins time frame A long beep tone; device in standby
mode
Increase
Volume
Press Vol+ repeatedly till desired volume
level
A short beep tone with volume
increases at 5dB
per step; 2 short beep tone while
reaching
maximum volume level. Total 6 levels
Decrease
Volume
Press Vol- repeatedly till desired volume
level
A short beep tone with volume
decreases at 5dB
per step; 2 short beep tone while
reaching
minimum volume level. Total 6 levels