User's Manual

2
Charge Your Headset:
The headset comes with a built-in rechargeable battery. Prior to using the
headset for the first time, it is recommended to fully charge the battery first.
Insert the USB Charge cable into the headset's USB charging port and
plug the cable to a USB power source. The light on the power button
(status indicator) will stay red during charging.
IMPORTANT : Charging indication will be delayed for a few seconds if the
headset has not been used for a long time or the battery is drained.
Normal Char ging Time:
It takes up to 3 hours to fully charge the battery. When the battery is fully
.der morf ffo nrut lliw rotacidni sutats eht ,degrahc
Talk and Standby Time:
A fully charged battery can offer up to 9 hours of talk time and up to 240
hours of standby time. When there are no calls, the headset should remain
Battery Low Indication:
When the battery power is low and the headset is on, it will automatically
power off within 1 minute. Please follow the instructions described above to
recharge the battery.
USB Charging
Port Mini-B (5-Pin)
USB 5-Pin Mini Plug
USB Charge Cable
ASD-116 InstructionManual-FINAL02 4/10/10 12:54 PM Page 2