MSDS

MATERIAL SAFETY DATA SHEET
Per OSHA-recommended ANSI Z400.1-2004 standard format &
in accordance with European standard format
1. Product and Company Identifcation: Date of preparation: February, 2014
Product Name: Storm System 100% Acrylic Latex Stain for Siding, Matte #412XX Series Colors (See separate MSDS
for Clear Base 41295)
Producer: California Products Corporation
150 Dascomb Rd., Andover, MA 01810 (U.S.A.)
All Inquiries to: Tel: (978) 623-9980 Fax: (978) 623-9960
Emergency Information: 24 Hour Contact: CHEM-TEL: (800) 255-3924
2. Hazards Identification:
EMERGENCY OVERVIEW: Product Description: This product is a pigmented liquid. Health Hazards: The primary hazards
presented by this product are the potential for mild irritation of contaminated tissue and the potential for accidental ingestion.
Flammability Hazards: This product is not flammable. If this product is involved in a fire, the decomposition products generated
will include irritating vapors and gases and some carbon monoxide. Reactivity Hazards: This product is not reactive.
Environmental Hazards: Although release of this product to the environment is not expected to cause significant adverse
effect, all releases should be avoided. Emergency Considerations: Emergency responders should wear appropriate protection
for situation to which they respond.
3. Composition/Information on Ingredients:
Non-hazardous:
Some colors may contain iron oxide red, brown, or yellow (CAS #1309-37-10), pigment yellow (CAS #6358-31-2), carbazole
violet (CAS #6358-30-1), toluidine red (CAS #2425-85-6), Phthalocyanine green (CAS #1328-53-6), phthalocyanine blue (CAS
#147-14-8), or pigment orange (CAS #2814-77-9)
Hazardous:
Titanium dioxide (CAS #13463-67-7) <25.0% ACGIH TWA 10 mg/m
3
(not in clear base)
*Ethylene glycol (CAS #107-21-1) <5.0% OSHA PEL 50 ppm
Some colors may contain Carbon black (CAS #1333-86-4), ACGIH TWA 3.5 mg/m
3
Note: These products contain more than 0.1% crystalline silica (CAS #14808-60-7) (See note under paragraph #11,
“Toxicological Information”)
4. First Aid Measures:
Eye & Skin contact: Immediately flush eyes with plenty of water for at least 15 minutes and consult physician. Wash skin
thoroughly with soap and water. If drenched, remove and wash clothing before reuse. Ingestion: If victim is conscious give 2
glasses of water. Call a physician.
5. Fire-fighting methods: Product is non-combustible
FLASH POINT: Not flammable
AUTOIGNITION TEMPERATURE: Not established
FLAMMABLE LIMITS (in air by volume, %):
Lower (LEL): Not applicable
Upper (UEL): Not applicable
Page One of Three Pages

Summary of content (3 pages)