MSDS

Page 4 of 11
Other Information
Refer to protective measures listed in Sections 7 & 8
Environmental Precautions
Environmental Precautions
Refer to protective measures listed in Sections 7 & 8.
Methods and Material for Containment and Cleaning Up
Methods for Containment
Prevent further leakage or spillage if safe to do so
Methods for Cleaning Up
Immediately place absorbent material in a sealed water-filled metal container to avoid spontaneous
combustion of absorbent material contaminated with this product. Pick up and transfer to properly
labeled containers.
SECTION 7: HANDLING AND STORAGE
Precautions for Safe Handling
Handling
Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin, eyes or
clothing. Do not eat, drink or smoke when using this product. Avoid breathing vapors or mists. Ensure
adequate ventilation. In case of insufficient ventilation, wear suitable respiratory equipment. Take off
contaminated clothing and wash before reuse. Keep away from contact with clothing and other
combustible materials to avoid fire.
Conditions for Safe Storage, Including any Incompatibilities
Storage
Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach of children.
Incompatible Products
None known based on information supplied
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
Exposure Guidelines
Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH
Titanium dioxide TWA: 10 mg/m
3
TWA: 15 mg/m
3
total dust IDLH: 5000 mg/m3
13463-67-7 (vacated) TWA: 10 mg/m3 total dust
Ethylene glycol TWA: 50 ppm TWA: 50 ppm ---
107-21-1 (STEL 100 mg/m
3
)
Crystalline silica TWA: 0.1 mg/m
3
0.1 mg/m
3
(respirable dust) ---
14808-60-7 (respirable dust)
Iron oxide TWA 5mg/m
3
10 mg/m
3
---