MSDS

Page 1 of 3 pages
Page 2: Storm System™ Acrylic Stain w/Enduradeck™ Technology #418XX-Series
FIRE EXTINGUISHING MATERIALS: Use extinguishing media appropriate for surrounding fire
Water Spray: OK Carbon Dioxide: OK
Foam: OK Dry Chemical: OK
Halon: OK Other: Any “ABC” Class
6. Accidental release measures:
Personal precautions: Do not get in eyes. Do not take internally. Avoid skin contact. Prevent
prolonged or repeated breathing of vapor or spray mists. Keep unnecessary people away. Floor
may be slippery, use care to avoid falling. Dike and contain material with inert material (e.g. earth,
sand). Transfer liquid and contaminated diking material to separate containers for disposal.
Environmental precautions: Keep spills and cleaning run-offs out of municipal sewers and open
bodies of water. Comply with local, national and state regulations.
7. Handling and Storage:
Keep closure tight and containers upright to prevent leakage. Precautionary labeling: KEEP FROM
FREEZING". Product is non-combustible.
8. Exposure Controls and Personal Protection:
General protection and hygienic measures: Avoid contact with skin. Do not get in eyes. Do not take
internally. Avoid breathing vapors or spray mists. Use in well-ventilated areas. Hand/skin
protection: Wear neoprene or rubber gloves to prevent skin contact. Wash hands before eating,
smoking or using the wash room. Food or beverages should not be consumed anywhere this
product is handled or stored. Respiratory protection: None required if good ventilation is maintained.
Wear respirator suitable for concentrations and of contaminants encountered. Use approved
chemical/mechanical filters designed to remove particulates in open and restricted ventilation areas.
Use approved airline type respirators or hoods in confined areas. Eye/face protection: Use
approved safety eyewear including side shields, chemical goggles and face shields.
9. Physical and Chemical Properties:
Forms: Viscous liquid, slight ammoniacal odor
Density: Varies with product color
Solubility in water: Complete colloidal dispersion
10. Stability and Reactivity:
Stability: Hazardous polymerization will not occur. Stable. Hazardous reactions: Avoid contact with
strong oxidizing agents (e.g. nitric acid, permanganates), etc.
11. Toxicological Information:
No data available
12. Ecological Information:
No Data Available.