Table of Contents Introduction Recording Safety Precautions -Voice Recording List of Items -Line-IN Recording from external audio source Product Introduction FM Radio mode -Basic Functions -Searching FM Frequencies -Parts Names -Storing the selected frequency -Menu Configuration -FM Turner and Recording Delete How to use manager program -Delete File or Folder -Installing software to PC -Driver Installation -Setting Ranged Repeat -Select EQ File Download/Upload -SET
Digital Audio Player, Xuke XUKE is a PLUG & PLAY type portable digital audio player that supports MP3 and WMA multi file formatting, FM Radio, Voice Recording and encoding function. Xuke uses Li-polymer rechargeable battery which allows for more than 14hours non-stop play from 2 hour USB Charge. Xuke also provides GUI (Graphical Users Interface) and Firmware Upgrade that allow the user operate various functions more easily and quickly. Please visit our worldwide web-site at www.stormblue.co.
Cautions Avoid high or cold temperature and moisture. Do not drop or cause impact the product. Do not other Avoid direct sunlight, high different things in the temperature from heating product. device. Avoid product have placing the under high moisture or dust level Do not place magnetic any device near the product.
- Do not shake or apply heavy shocks on the product It might be the cause of malfunction or damaged -Avoid contacting the product with water This may cause serious damage to the product. If the player gets wet, wipe with a soft towel or rag as soon as possible. -Do not wear earphones while driving an automobile, bicycle, or motorcycle. Not only it is dangerous, but it is also illegal in some jurisdictions.
Included Accessories Earphones User’s Manual USB Cable Install CD Arm Band Carrying Case (Optional) (Optional) Audio Cable Neck Strap * Items can be changed without notice to increase the performance or quality of the product.
Product Introduction -Feature Multi-Codec Player Supports both MP3 and WMA file format Firmware Upgrade Firmware download are available to easily upgrade the newest functions on this product. Multi Languages Support with Graphic OLED Display localized file names in 35 languages with graphic OLED screen.
① Play Mode (LCD Display) ② Artist & Music Title ④ ` ⑤ ⑥ ③Played Time Display ⑦ ⑧ ④ EQ ①① ⑫ ⑤ Play Speed ⑥ Lock ② ⑦ Total Number of Music File ⑧ Current Track Number ③ ⑨ File Name ⑩ SAMPLE RATE ⑨ ⑩ ⑪ ⑪ BIT RATE ⑫ Display Battery charge status (Button Table) Function Key Operation Activation ☞ If the music files selected, play the selected music file ▶/■ Click (Play/Stop) If the folder is selected, move to the selected folder ☞ Move to the MENU Mode Long Click ☞ Power OFF Volume +/-
-MENU Structure Repeat EQ Folder -Normal -FLAT -FOLDER 1 -Rep 1 -POP -FOLDER ALL -Rep All -ROCK -RANDOM -LIVE -Intro -CLASSIC -VOCAL -DBASS Play Speed FM BAND System Setup -SLOW -KOR/US -LCD Contrast -NORMAL -EU/CHA -Backlight Time -JAPAN -VOICE REC Setup -AUDIO REC Setup -OFF Time Setup -Format -Language Select -F/W UpGrade -EXIT
Software Installation 1) For Windows 98/SE The software should be installed before using the product. For Firmware Upgrade, install Upgrade program after installing Windows 98/SE driver.
-Installing Software to PC - Insert the provided CD in the CD-ROM of PC and follow the below instructions. Below screen will be appear. If it does not run automatically, run “Setup.exe” file from the install CD [Manager program] * For Windows 98/SE In Windows 98/SE, USB MP3 Disk cannot be recognized in the PC without USB Drive installation. (How to Install) - Click Install/uninstall button from ‘Windows 98/SE USB Drive installation from the manager program.
* X-Manager for MP3 - This is an exclusive program to upgrade the newest firmware and the font for MP3 Player. You may install this program with the sequence as follows. -Click Install/uninstall from ‘X-Manager for MP3’ from the manager program. [Start] [Step1] [Step2] [Finish] (Upgrade Firmware) 1. When the installation is finished, ‘X-Manager for MP3’ icon is created in the Window and the following program appears. [ICON] 2.
*Warning) During the upgrade work, do not disconnect or execute other programs on the same PC. If so, fetal errors may occur in the PC or product. ②Font Upgrade: For font upgrading, click ‘Upgrade Font’ button and download the upgrade file to a folder you want. Connect to PC & File Download/Upload -Connecting to PC (Notice) Turn the player on before connecting to PC. If so not, the PC cannot recognize the player as the removable disk.
Open the cap of the player and connect the USB Port to the USB Port on PC. 2. Connecting the player to a PC using a USB Cable Connect one end of the provided USB Cable to one of the USB Port on the PC, and connect the other end of the player. - File Download / Upload Turn the player on and connect to PC. The Player supports PLUG & PLAY. The product will be automatically recognized as removable disk on. * Making new folder on the player 1. Open Windows Explorer and select the removable disk.
2. Select the new folder with Right click on mouse. 3. New folder is created. Try the desired name in the new folder.
* Downloading the files or folders from PC to the player 1. Select the files or folders on the PC to transfer to the player. 2. Select the desired folders or files on the player.
Transferring 3. Download is completed to the player. *Deleting the files or folders on the player 1.Select the files to delete.
2.Select “DELETE” from MENU mode. A warning message “Are you sure?” is displayed on the LCD. Choose “YES” to delete. 3.Deleted is completed. -Formatting Move to the Windows Explorer and select the removable disk to click file formatting. Note: Format will delete all files in the player.
format with only FAT16 region. FAT32 is not supported. -Disconnecting from the PC Before disconnecting the player from the PC, double click on the green arrow icon the toolbar located at the bottom right of the screen. Click on the stop USB Mass Storage Device. , When the dialogue box “ Safe Removable of the hardware” displayed on LCD, click “OK” to disconnect the player from PC. *NOTE: Fatal error may occur in the PC or the player if the player is removed during the above procedures.
- Press Power ON/OFF (MODE SW) button over 1 second will turn the power on. Press the same button again over 1 second will turn the power off. * NOTE: The power will turn off automatically if there is no action in Stop mode within the configured Auto Off time 2. Music Playing - Press ▶/■ (Play/Stop) button and select Play mode at the main Menu to play Audio File. Press the same button for Pause function. Moving forward or backward the file, use the jog key to FF(►►) or REW(◄◄) shortly.
- Press Power ON (MODE SW) button shortly to enter the MODE (Play, FM, Encoding, Voice Recording) Click Click - Press and hold the ▶/■ (Play/Stop) button and move to Setup Menu.
Play Mode -Listening MP3 File 1. Press and hold the Power ON (MODE SW) button to turn the player on. * NOTE: The capacity will be displayed as shown below. The player will be started at the last position. Long Click 2. Display the Capacity Select the desired file to listen by using the jog key to ◄◄ or ►► (+) Up (-) Down Select the file 3. Press the ▶/■ (Play/Stop) button and the selected file will be played.
4.
FM Radio Mode NOTE: Earphone should be inserted into the Player to receive FM frequency since the earphone works as an antenna 1. Press the Power ON/OFF (MODE SW) button to select FM Mode. Click 2. Mode Select Click FM frequency is displayed as below. FM Mode 3. Use the jog key to ◄◄ or ►► to search the desired channel.
4.
-Playing Voice and recorded FM file (Playing Voice file) 1. Press the ▶/■ (Play/Stop) button to stop the current operation. Click 2. Move to the VOICE folder and select the file to listen by using the Volume(+/-) jog key. Note: The recorded file is stored as “VOICE001” “VOICE002” in the Voice folder. (+)Up (-)Down 3. Press the ▶/■ (Play/Stop) button and play the recorded file. (Listen to the recorded FM Radio file) 1. Press the ▶/■ (Play/Stop) button to stop the current operation. Click 2.
Recording -Voice Recording 1. Press the Power ON (MODE SW) button. Click 2. Select Voice Recording Mode by using the jog key to ◄◄ or ►► REW(◄◄) FF(►►) 3. Press the ▶/■ (Play/Stop) button and move to Recording Mode. Click 4. Press the AB/REC button and voice recording starts. NOTE: Press the AB/REC button to pause the recording process. Press the AB/REC button again to restart recording.
5. Press the ▶/■ (Play/Stop) button to stop recording. (The recorded file is stored as “VOICE001” “VOICE002” in the VOICE folder) -Line-in Recording 1.Connect LINE OUT jack of the external audio source and the Line-IN jack of the player with a audio cable as below. 2. Press the Power ON (MODE SW) button. Click 3.
4. Press the ▶/■ (Play/Stop) button and enter Line Encoding mode. Click 5. Press the AB/REC button and voice recording starts. *NOTE: Press the AB/REC button to pause the recording process. Press the AB/REC button again to restart recording. Click 6. Press the ▶/■ (Play/Stop) button to stop recording. (The recorded file is stored as “ENCO-001” “ENCO-002” in the ENCODE folder) 7. To play or move to the previous mode, press the Power ON (Menu SW) button. The below screen will be displayed.
FM Radio Mode (Listening & Recording) *Press the Menu SW (Jog SW) and select the scan or preset mode. NOTE: Earphone should be inserted into the Player to receive FM frequency since the earphone works as an antenna -Turn to the desired frequency Use the jog key to and search the desired frequency. REW(◄◄) FF(►►) Auto Scan function: Press and hold the jog key to ◄◄ or ►►. The nearest channel is automatically sought. REW(◄◄) FF(►►) -Save FM Channels 1. Press the Menu button and select the scan mode.
2. Use the jog key to ◄◄ or ►► to select the channel. REW(◄◄) 3. FF(►►) Press and hold the A-B button for 1 to 2 seconds. *CH is displayed on the LCD as below. Long Click 4. Select the desired CH by using the jog key to ◄◄ or ►►. Press and hold the REC/A-B button to store the selected channel. Long Click REW(◄◄) FF(►►) NOTE) This function may not work within weak transmission areas. - Change PRESET channels 1. Press the Menu button and select the Preset mode.
2. The saved channels are displayed as shown below by using the jog key to ◄◄ or ►►. Click REW(◄◄) FF(►►) -Record FM Radio 1. Press the Power ON (MODE SW). Short Click 2. Select FM Radio mode by using the jog key to ◄◄ or ►►.
3. Press the ▶/■ (Play/Stop) button and select FM RADIO Mode. 4. Press and hold the AB/REC button and the recording starts. Long Click 5. Press the AB/REC button to pause the recording process. Press the AB/REC button again to restart recording. Click 6. Press the ▶/■ (Play/Stop) button again to stop recording. (The recorded file is stored as “RECFM001.MP3” or “RECFM002.
Delete - Delete Files or Folders of the player 1. Select the files or folders to delete by using the Volume(+/-) buttons. (+) Up (-) Down 2. Press and hold the AB/REC button to delete. “Erase?” is displayed on the LCD. Long Click 3. Use the jog key to ◄◄ or ►► to select “Yes” and press the Power ON (Menu SW) button to delete the selected file or folder. REW(◄◄) FF(►►) Notice) All music or voice files in the folder will be deleted. But if the text or other files exist there, the folder is not deleted.
-REPEAT Mode 1. Press and hold the ▶/■ (Play/Stop) button. Long Click 2. Use the jog key to ◄◄ or ►► to select the Repeat Mode. REW(◄◄) FF(►►) 3. Press the ▶/■ (Play/Stop) button to select the Repeat Mode. Click Select the desired Repeat Mode. Normal Rep 1 Repeat Mode Rep All RANDOM Intro Plays all files once sequentially. Plays the selected file repeatedly. Plays all stored files repeatedly. Randomly play all files in the Player repeatedly. Plays only sequentially.
-Select EQ 1. Press and hold the ▶/■ (Play/Stop) button. Long Click 2. Use the jog key to ◄◄ or ►► to enter the EQ Mode. REW(◄◄) FF(►►) 3. Press the ▶/■ (Play/Stop) button to select the EQ type.
-Folder Mode 1. Press and hold the ▶/■ (Play/Stop) button. Long Click 2. Use the jog key to ◄◄ or ►► to enter the Folder mode. REW(◄◄) FF(►►) 3. Press the ▶/■ (Play/Stop) button to select the folder mode type. Click -Play Speed 1. Press and hold the ▶/■ (Play/Stop) button.
2. Use the jog key to ◄◄ or ►► to enter the Play Speed Mode. REW(◄◄) FF(►►) 3. Press the ▶/■ (Play/Stop) button and select the Play Speed type. Click -FM BAND Setting 1. Press and hold the ▶/■ (Play/Stop) button. Long Click 2. Use the jog key to ◄◄ or ►► to enter the FM BAND Mode.
3. Press the ▶/■ (Play/Stop) button and select the suitable FM Band type. Click KOR/US Korea, USA and others (87.5MHz~108MHz) EU/CHA Europe JPN Japan (76MHz~90MHz) -Navigation Mode 1. Press the ▶/■ (Play/Stop) button to stop the current operation. Click 2. Select the desired folder by using the Volume(+/-) buttons. (+)up (-)Dwon 3. Press the ▶/■ (Play/Stop) button and listen the selected song.
4. Move to the upper or sub folder by using the jog key to ◄◄ or ►► REW(◄◄) FF(►►) -Repeat A-B Mode Play a particular section of the current file repeatedly. 1. Press the AB/REC button at the beginning position of the block to be repeated. The “A” icon is displayed as shown below. 2. Press the AB/REC button again at the ending position of the repeat block, and the icon changes as shown below. * A-B block is played repeatedly. 3. To disable this function, press the AB/REC button once again.
System Setup 1. Press and hold the ▶/■ (Play/Stop) button. Long clik 2. Select the System Setup Mode by using the jog key to ◄◄ or ►► REW(◄◄) FF(►►) 3. Press the ▶/■ (Play/Stop) button and choose the Mode to change.
Set the transmission rate of the recorded voice files - 6Ks/TVF, 56K/MP3, 64K/MP3, 80K/MP3, 96K/MP3, 112K/MP3, 128K/MP3 Set the transmission rate of the recorded file from external audio sources. - 128KBps, 160KBps, 192KBps When the operation is paused or stopped, System turns off power automatically.
Product Specifications Item Detail Specification Supported Audio Format MPEG 1/2/2.5 Layer 3, WMA Equalizer POP / ROCK / CLASSIC / VOCAL/LIVE/FLAT/DBASS FM Frequency range 76 ~108 MHz FM Signal band noise ratio 50dB Frequency storage Preset 20 units Compression Bit Rate 32kbps ~ 224kbps Sampling frequency 32KHz / 44.1kHz / 48KHz Voice recording TVF・MP3 Format Windows 98SE/2000/Me/XP/2003 Mac Up V8.6 Linux Up Kernel 2.4.18 Rechargeable battery Li-Polymer 420mA Size 16.
Troubleshooting - Check the following list before requesting A/S. The Player does not - Lock is in the HOLD position? (Release the hold) power on - The batteries are exhausted? (Recharge the batteries) - Check whether VOLUME is set to “0” . No sound is heard from - Make sure that there are MP3 files in the memory player or distortion is - Check whether plug is dirty. heard during playback - Corrupted MP3 or WMA files may make a static noise and the sound may cut off. Try with other files.
Product Warranty 1. This product has been manufactured under strict quality and control inspections. 2. If the product breaks down during normal usage, our dealer/or service center will fix the product for the period free listed in the warranty as below. 3. A service fee may apply after the warranty period or in case of the following. - If the problem was caused by the customer’s misuse. - If any internal modification was done by the customer. 4. We do not reissue warranty certificate.
Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
