User's Guide

Overview & Controls
Power Status Indicator Light
Power ON Flashing blue light
Low Battery Flashing red light
Charging Solid Red light
Finished Charging Solid Blue light
Features
• Bluetooth Wireless 5.0: range 49 feet
• Foldable memory neck band holds any shape
• Voice prompts announce earbud operations
• Built-in microphone
• Neck band controls
• Micro-USB port for battery recharge
• Built-in rechargeable battery
• Battery life: approx. 6 hrs at 100% volume
Includes
• 3 pairs of eartips - small / medium / large
• Micro-USB to USB charging cable
• User’s guide
Charging the Battery
Initial charge time is approximately 2 hours. Charge
fully before use.
• Pull back the cover on the Micro-USB charging
port and connect it to the USB port of a powered
on computer or USB power adaptor (not included)
to charge.
Playing Audio Wirelessly
1. After connecting Bluetooth, use the controls on
the connected device to select and play audio.
2. Use the controls on the unit or the connected
Bluetooth device to play, pause, or skip audio,
and adjust the volume level.
Using the Speakerphone
1. To accept a call, press the Speakerphone button
or use the controls on the connected phone.
2. To end a call, press the Speakerphone button or
use the controls on the connected phone.
Power / Pair / Play / Pause
/Speakerphone
Press and hold to power ON/OFF.
Press to play/pause audio or
answer/end a phone call.
Volume / Skip
Press to change the
volume level.
Press and hold to change
the audio track.
LED Indicator Light
& Microphone
Bluetooth Connection
1. This unit features automatic device pairing and
is ready to pair as soon as it powers on. Power on
the headset by pressing and holding the Power
button, then a voice will announce, “Power ON.”
The headset is ready to pair.
2. To connect to the headset, open the Bluetooth
Settings menu on your smartphone or tablet and
select IAEB109 from the list. If need be, refer to
the user manual for your device for more specic
instructions on Bluetooth pairing.
3. When successfully connected, a voice will
announce, “Bluetooth connected.” Use your
smartphone or tablet to select and play media.
Use the controls on your device or the headset to
play, pause, or skip audio, and adjust the volume.
4. After initial pairing, the headset will automatically
connect to the last device used whenever
powered on. To pair to another device, begin with
the unit powered OFF, then press and hold the
Power/Pair button on the headset and connect
to it using the new device.
Troubleshooting
If the earbuds should become unpaired or will not
connect normally, open your device’s Bluetooth
Settings Menu and follow these steps.
• Disconnect, then reconnect to the earbuds.
• If the problem persists, delete the earbuds from
the list of available devices (“Forget This Device”).
• Turn Bluetooth OFF then ON again, and repeat the
Bluetooth Connection steps.