- Gazco Balanced Flue Convector Fire Instructions for Use, Installation and Servicing Manual

INSTALLATION INSTRUCTIONS

COMMISSIONING

Each of the four switches can be set to either one of two

positions, in any combination.

 Tore-codethehandset:

 • ChangethecombinationofhowtheDIPswitchesareset,

Diagram 12

AR1936

Once the handset has a new code the control box needs to

be reprogrammed:

To access the control box see Servicing Instructions, Section

11 - Control Box.

 • Pressandholdtheresetbuttononthecontrolboxuntil

you hear two signals. After the second longer signal:

  • Releasetheresetbuttonandwithin20 

  secondspresstheDOWNbuttononthe 

handset until you hear an additional long signal

confirming the new code

5. COMMISSIONING

5.1 Complete the Commissioning Checklist at the front of this

manual covering:

 • Fluechecks

 • Gaschecks

5.2 In the unlikely event that the appliance is receiving

interferecefromotherelectronicdevices,re-programmethe

handset/Control box