ogue Eco Design Installation User Instructions

10
6. Running the Appliance
Wood Burning Stove
6.1 There are several settings that can be used when burning
wood, see Diagram 16.
The air control slider is operated by pushing or pulling to
increase or decrease the air flow. Each position is indicated
by an indent 11mm apart.
16
OFF
Maximum Out
NOMINAL RUNNING
Smoke Control Setting
(If enabled)
MAXIMUM RUNNING
START UP
Maximum In
6.2 Start Up
Off
(Maximum Out)
Nominal Running
Smoke Control Setting
(if enabled)
Maximum Running
Start Up
(Maximum In)
17
 UsetheStartUpsettingtoestablishthereandduringthe
intial moments of refuelling.
Do not run for long periods of time on this setting as this
couldoverretheapplianceordamagetheglass.
 Oncethereisestablished:
— Move the control lever out.
The notched settings should be used as a guide.
The appliance can be burnt with the control anywhere along
its length.
6.3 Maximum Running
18
Off
(Maximum Out)
Nominal Running
Smoke Control Setting
(if enabled)
Maximum Running
Start Up
(Maximum In)
The Maximum Running setting allows the appliance to burn
at the maximum output when burning wood. Take care not to
overretheappliance.
6.4 Nominal Running
Off
(Maximum Out)
Nominal Running
Smoke Control Setting
(if enabled)
Maximum Running
Start Up
(Maximum In)
19
The Nominal Running setting burns wood at the most
efcientoutput.
User Instructions