ogue Eco Design Installation User Instructions

28
Pre-Installation Instructions
Take care not to damage the rebricks.
— Remove the bricks in the correct order as shown in
Diagrams 8 and 9.
8
1
2
2
1
3
4
WOODBURNING BRICK SET
9
2
2
3
MULTI-FUEL BRICK SET
11
4.6 Usethengerholesinthesidebrickstotiltthebaseinwards
and slide out of the door opening.
4.7 Slide the top bricks to the centre of the box and manoeuvre
through the appliance.
4.8 With the side bricks removed there is space either side of the
backbricktoliftthroughtherebox.
4.9 Woodburning Only: Lift and remove the base bricks.
4.10 Re-install in reverse order.
5. Removal of the Multi-fuel Grate
5.1 The Multi-fuel grate can be removed for cleaning to maintain
good working condition.
To remove the grate:
— Remove the log guard to enable access (see Section 2).
— Remove the ashpan (see User Section 10, Diagram 35).
— Remove the firebricks (see Section 4).
— Tilt the centre grate downwards and lift to remove, see
Diagram 10.
10
— Lift the main grate from either side and carefully
manoeuvre through the firebox, Diagram 11.
11