ogue Eco Design Installation User Instructions

33
Installation Instructions
 —Lineupwiththeueholeandsecureinpositionusing2
M8 nuts onto the 2 front studs (reverse of removal).
 —Slidetherearuecollarontothefourstudsonthe 
outside of the back plate and secure using 4 x M8 nuts.
 —Sealtothereboxusingrecement.
— Re-install 2 upper rear bricks and 2 side bricks.
 —Re-installthebafe.
4.7 Thefollowinguepipeisavailabletoensuresafeinstallation:
5" Tee Stovax Product Code 4516
6" Tee Stovax Product Code 4616
5" 135
o
Bend Stovax Product Code 4512
6" 135
o
Bend Stovax Product Code 4512
5" Flue Pipe x 612mm long Stovax Product Code 4501
6" Flue Pipe x 612mm Long Stovax Product Code 4601
13
Tee with cap
Cap
Sealcollarwithre
cement
Self-tapping screw
( 1 side only )
4.8 A Typical Rear Flue Pipe Installation
600mm minimum
135˚Elbowwith
access cover
All models
Connection to chimney
as detailed in Building
Regulations
Flue pipe x
612 long
600mm minimum
1000mm max
unsupported
14
4.9 Lineupthecasttopushwiththefrontandsidesof
the appliance.
4.10 Fitthecastplugintotheuehole.
Line up edges
of cast top
plate with the
appliance
Cast Plug
15
5. Cast Plinth - Optional
 Thisappliancecanbettedwithtwooptionaldecorative
plinths:
Appliance Standard Plinth Midline Plinth
Small / Small T VG-SM-BP VG-SM-BML-E
Midi / Midi T VG-MID-BP VG-MID-BML-E
Medium Slimline VG-MEDSL-BP VG-MEDSL-BML
Medium VG-MED-BP VG-MED-BML
The installation method is the same for both plinths.
To install the Standard Plinth:
5.1 Decide on the position of the appliance on the hearth.
5.2 Secure the plinth to the hearth using the 2 holes in the
plinth back and suitable fasteners, or use the 2 x L shaped
brackets (see Installation Section).
16
Standard Plinth shown
2 holes in plinth back