Users Guide & Installation Handbook Stoves Built-in Electric Part No 083137203 Date 26/11/2012
contents & INTRODUCTION CONTENTS • SAFETY • USING THE product • cleaning • INSTALLATION INSTRUCTIONS • technical data • CUSTOMER CARE INTRODUCTION Thank you for buying this Britishbuilt appliance from us. This guide book is designed to help you through each step of owning your new cooker, from installation to use. Please read it carefully before you start using your product, as we have endeavored to answer as many questions as possible, and provide you with as much support as we can.
Safety Before Using the product Make sure that you have removed all packaging and wrapping. Some of the items inside this appliance may have additional wrapping. General WARNING! - The appliance and its accessible parts become hot during use. Care should be taken to avoid touching heating elements. Children less than 8 years of age shall be kept away unless continously supervised.
Safety and performance, particularly in relation to surface temperatures becoming hot and gas operated parts not working efficiently. The cooling fan (if fitted) is designed to run on after the control knob has been switched off. • Do not spray aerosols in the vicinity of this appliance while it is in operation. • Do not store or use flammable liquids or items in the vicinity of this appliance. • Do not modify this appliance.
Safety or cover the oven base with foil, as this can cause the base element to overheat. WARNING! The top element gets extremely hot when in use, so take extra care to avoid touching it. WARNING! Do not modify the outer panels of this appliance in any way. WARNING! This appliance must be earthed. WARNING! There is a risk of electric shock, so always make sure you have turned off and unplugged your appliance before starting. Always allow the product to cool down before you change a bulb.
Safety stable and can lead to spillage or injury. • Always use the Minute Minder (if fitted) if you are leaving the oven unattended - this reduces the risk of food burning. Do Not • Never place items on the door while it is open. • Never wrap foil around the oven shelves or allow foil to block the flue. • Never drape tea towels near the oven while it is on; this will cause a fire hazard.
Using the grill - electric Caution: Accessible parts may be hot when the grill is used - young children should be kept away. a grill pan handle can be purchased as an optional extra from our spares department quoting the part numbers below. Handle - 082283705 The speed of grilling can be controlled by adjusting the grill setting or by selecting a higher or lower shelf position. For toasting, and for grilling foods such as bacon, sausages or steaks, use a higher shelf position.
USING THE TOP OVEN - electric (if fitted) When you are cooking keep children away from the vicinity of the oven. Caution: The top element gets extremely hot when in use, so take extra care to avoid touching it. The top oven is a conventional oven. Note: The top oven is not controlled by the programmer (if fitted). To turn on the top oven Turn the temperature control knob until the required temperature is selected.
USING THE TOP OVEN - ELECTRIC (if fitted) Top oven baking guide Cooking temperatures Cooking times The temperature settings and time given in the Baking Guides are based on dishes made with block margarine. If soft tub margarine is used, it may be necessary to reduce the temperature setting. If a recipe gives a different temperature setting to that shown in the guide, the recipe instruction should be followed. These times are based on cooking in a preheated oven.
USING THE MAIN OVEN - ELECTRIC Accessible parts may be hot when the oven is used. Young children should be kept away. To switch on the oven Turn the oven control knob(s) to the required setting. The red thermostat indicator (if fitted) will come on until the selected temperature is reached and then go off; it will turn on and off periodically as the thermostat operates to maintain the selected temperature.
USING THE MAIN OVEN - ELECTRIC Slow cooking ( Setting or 100°C) • Make sure that frozen foods are thoroughly thawed before cooking. • Do not slow cook joints of meat or poultry weighing more than 2¼kg/4½lb. • Preheat the oven to 170°C and cook for 30 minutes, then adjust the oven control to or 100°C (slow cook setting) for the remainder of the cooking time. • Slow cooking times will be about 3 times as long as conventional cooking times.
USING THE MAIN OVEN - ELECTRIC There is no need to interchange dishes onto different shelves part way through cooking, as with a conventional oven. To help the air circulate freely Position the shelves evenly within the oven and maintain a clearance from the oven roof and base. If more than one cooking dish or baking tray is to be used on a shelf, leave a gap of at least 25mm between the items themselves and the oven interior.
USING THE MAIN OVEN - ELECTRIC Note: This is a high efficiency oven, therefore some adjustment will have to be made to conventional cooking temperatures. The table below shows conventional cooking temperatures, ‘A’ efficiency temperatures and gas marks. For optimum results, conventional temperatures need to be converted to ‘A’ efficiency temperatures. For example, an item which would normally cook at a conventional temperature of 180 °C, will now cook at the ‘A’ efficiency temperature of 160°C.
USING THE MAIN OVEN - ELECTRIC Traditional fruit cakes Roast turkey It should be remembered that ovens can vary over time, therefore cooking times can vary, making it difficult to be precise when baking fruit cakes. Roasting turkey involves cooking two different types of meat - the delicate light breast meat, which must not be allowed to dry out, and the darker leg meat, which takes longer to cook. It is necessary therefore, to test the cake before removal from the oven.
USING THE MAIN OVEN - ELECTRIC Roasting guide Notes: The times given in the roasting guide are only approximate, because the size and age of the bird will influence cooking times as will the shape of a joint and the proportion of the bone. • When cooking stuffed meat or poultry calculate the cooking time from the total weight of the meat plus the stuffing. • For joints cooked in foil or covered roasters, and for lidded casseroles, add 5 minutes per 450g (1lb) to the calculated cooking time.
using the OVEN/GRILL - multi-function Oven & Grill Functions The chart below details all of the functions which are available. Your oven may not have all of the functions shown here. Symbol Function / Feature Recommended Uses Conventional Grill This function cooks food from the top and is ideal for a range of food from toast to steaks. As the whole grill is working you can cook large quantities of food. Economy Grill For smaller quantities of food, but is still ideal for anything from toast to steaks.
using the OVEN/GRILL - multi-function Grilling in the main oven The main oven grill & fanned grill are fixed settings using the inner element only. Make sure that the programmer is set to manual before grilling. When using either grill function, invert the grill pan trivet and preheat for 5minutes. Conventional grill The door must be open when the grill is used for conventional grilling - either fully open or using the door stop position - open the door about 75mm and it will hold open.
using the OVEN/GRILL - multi-function Manual operation Set the programmer to manual operation. See ‘Programmer / Clock’ section. Turn the selector control knob to the symbol for the desired oven function. Turn the main oven temperature control knob to the desired temperature. The red thermostat indicator neon will come on and off until the selected temperature is reached and then go off; it will turn on and off periodically as the thermostat operates to maintain the selected temperature.
using the OVEN/GRILL - multi-function Fan oven (i) Turn the selector control knob to the fan oven symbol. (ii) Turn the main oven control knob to the required temperature. The fan oven comes on when the oven is switched on and circulates the air around the oven to give a fairly even temperature throughout the oven. Fan and base heat only (i) Turn the selector control to the fan and base heat symbol. (ii) Turn the main control to the required temperature.
Using the CLOCK/programmer-elec(if fitted) The alternative programmers There are two types of programmer covered in this section - push button & touch control. Both programmers have the same symbol variants & functions but may vary in their method of operation. The push button programmer Symbol Symbol - Symbols on the LED display. Down/minus This ‘A’ symbol appears when either a semi, or fully automatic program is selected. This symbol will flash while a program is being set.
Using the CLOCK/programmer-elec(if fitted) you are asked to enter in an end time, or when you would like the oven to switch itself off. Setting the minute minder To set the time of day • Press the Up and Down buttons together for a few seconds, and release. • The ‘ •’ in between the numbers on the LED Display will begin to flash. • While the ‘ •’ is flashing it is possible to adjust the time using the Up and Down buttons.
Using the CLOCK/programmer-elec(if fitted) Semi-automatic cooking There are two types of semi automatic cooking available on this appliance. The oven must be switched on, and in use to use either of these functions successfully. The Duration method allows you to set the oven for a specific length of time. If a dish needed 2 hours to cook, then it would be possible for you to set the oven to turn off 2 hours later.
Using the CLOCK/programmer-elec(if fitted) Semi-automatic cooking The duration method • Press the Function button twice,(1) which will skip past the Minute Minder. • The LED display will flash the word ‘dur’, (2) and the ‘A’ will flash on the left hand side of the display. • Use the Up and Down buttons to set the length of time you want to cook for.(3) This must be done within 5 seconds or the time of day will show again.
Using the CLOCK/programmer-elec(if fitted) Fully automatic cooking (example) This programming method is best suited for when a delayed start time is required. Unlike the semi automatic methods this requires both the duration and the end time to be entered. The timer will work out the start time and begin cooking. • Press the function button twice to select the length of time your food will need. (7) • The ‘A’ on the left hand side will flash and the ‘dur’ message will flash up.
Using the CLOCK/programmer-elec(if fitted) The touch control programmer There are three touch control icons for this timer - the table below shows you what the symbols look like, depending on the model type, & their functions. The ‘function’ icon in the centre is used for setting the minute minder & setting up the automatic cooking - see below for details. Note - some functions require you to ‘touch & hold’ an icon for a few seconds, whilst others require you to just ‘touch’ the icon without holding.
Using the CLOCK/programmer-elec(if fitted) Setting the time of day Semi-automatic cooking Touch & hold the centre (function) icon for a few seconds until the ● symbol between the numbers on the LED display flashes. Method 1 - duration (switch off after set time period): While the ● symbol is flashing, you can adjust the time of day by touching the plus & minus icons. Please note: the hours & minutes adjust quickly.
Using the CLOCK/programmer-elec(if fitted) Use the plus & minus icons to select the time the oven is required to switch off. Once this is done the oven will switch itself off at the pre-selected time. To turn the alarm off, touch any icon. To cancel the semi-automatic programme at any time, touch the plus & minus icons together. Fully automatic cooking This function allows the cooker to switch on & off automatically. It requires both the duration & the end time to be entered.
USING THE PROGRAMMER - TOUCH 1.0 Overview of symbols & functions: Display symbols: Minute minder Cooking time End of cooking time Time of day Child lock Cooking pot Automatic mode Manual mode Pyrolysis mode (OPTIONAL) Acoustic signal 7-segment display Max. adjustable minute minder Max. adjustable cooking time Display hours:minutes Display minutes:seconds 1.1 Manual mode The programmer remains in MANUAL mode if no COOKING TIME or END of COOKING TIME is selected & the symbol is displayed.
using the programmer - touch 2.0 Touch Control Select a function Plus - increase time or volume Minus - decrease time or volume 2.1 Touch Controls Touching the & symbols momentarily increases or decreases the time by one minute (or the volume of the ACOUSTIC SIGNAL by one step). Touching the & symbols permanentlly increases or decreases the speed of time setting automatically. 2.2 Touch Control Touching the FUNCTION symbol momentarily, the next following function is chosen.
using the programmer - touch 3.0 FUNCTIONS 3.5 Minute Minder 3.1 Start of Function Select the MINUTE MINDER mode by using the FUNCTION symbol until the MINUTE MINDER symbol is flashing. The MINUTE MINDER can be set using the + or - symbols up to a maximum of . When a function is selected & the time or acoustic volume is set, the chosen function will start automatically five seconds after setting. The display shows the current TIME of DAY, except when the MINUTE MINDER is active.
using the programmer - touch Once the COOKING TIME has expired, the ACOUSTIC SIGNAL is heard. The display & the symbol shows flashes. After seven minutes maximum or after touching any of the touch control symbols, the ACOUSTIC SIGNAL stops but the symbol continues to flash.Touch the FUNCTION symbol, the symbol is displayed continously & the current TIME of DAY is displayed, except if the MINUTE MINDER is active. 3.
using the programmer - touch 3.8 Delayed Cooking Calculation of START TIME as below: To select DELAYED COOKING: 1. set the desired COOKING TIME - see paragraph 3.6. 2. set the desired END of COOKING TIME - see paragraph 3.7. DELAYED COOKING run down - the COOKING POT symbol is off until the START TIME is reached. COOKING TIME starts as soon as the START TIME is reached at which time the COOKING POT symbol is displayed. To modify or delete DELAYED COOKING, see paragraphs 3.6 COOKING TIME & 3.
cleaning General • It is important to clean the product regularly as a build up of fat can affect its performance or damage it and may invalidate your guarantee. • Always switch off your appliance and allow it to cool down before you clean any part of it. • Do not use undiluted bleaches, products containing chlorides, wire wool or abrasive cleaners on aluminium, stainless steel, or plastic/ painted parts as they can damage the appliance. Nylon pads can also be unsuitable.
Cleaning Removing Oven Parts For Cleaning Inner Door Glass (glass doors only) • The inner door glass panel can be removed for cleaning but it must be replaced the right way up. If there is any writing on the glass, you must be able to read it clearly when the cavity doors are open. • Always make sure that the glass is pushed fully into the Stop position. • To remove the glass panel, open the door wide, hold the top and bottom edges and slide out.
cleaning Telescopic Shelving System (if fitted) • • • • In addition to the traditional shelving fitted in your appliance, the telescopic shelving system is fitted in the most commonly used location in your cavity. The shelves with the telescopic system are easier to pull out than traditional shelving, which means the oven door stays open for a shorter period of time. The smooth action also reduces the likelihood of fat, or food, spillage, and gives you extra security.
installation Step 1 : Prepare installation Do not lift the appliance by the door handle. Whilst every care is taken to eliminate burrs and raw edges from this product,please take care when handling - we recommend the use of protective gloves during installation. Please note that the weight of this appliance is approximately 31kg (unpacked). Take care when lifting it into the housing unit - always use an appropriate method of lifting.
installation - 60CM i) When installed in a typical 600mm deep built in housing unit, the false back should be removed from the housing unit to provide the necessary depth for installation. ii) When the false back is removed, it is normally the case that the support shelf for the appliance leaves a gap between the back edge and the wall of approximately 80mm.
installation - 70CM Before you start Please read the instructions carefully planning your installation will save you time and effort. Look at the different ways the appliance can be installed - as shown on the following pages - and plan the installation to suit your situation. Leave the appliance in the base tray packaging until you are ready to install it. When you remove the appliance from the base tray packaging, take care not to damage it.
installation - 70CM Method 1: Without housing unit(between 2 base units) 2. Make sure they are the right way up as shown. Before installing the appliance, check the internal dimensions as shown. 3. Take one of the side trims, hold it against the side of the base unit, and mark off 687mm from the top edge of the base unit, to the top edge of the runner. The space for the appliance must be clear of obstruction. You may have to cut into or remove any rear cross members to obtain the 550mm minimum depth.
installation - 70CM Method 2: Housing unit with internal height less than 710mm Note: You will not need the 2 side trims (687mm long) or the appliance runners for this installation. You will need the 2 runners to fix to the adjacent cabinets. Before you start; Before removing the bottom shelf or modifying the housing unit, make sure that it will remain structurally sound, eg; by fixing to adjacent cabinets, floor or worktop.
installation - 70CM Method 3: Housing unit with internal height 710mm or more Note: You will not need the 4 runners and 2 trims that are packed with the oven for this installation. 1. When installed in a typical 600mm deep built in housing unit, the false back should be removed from the housing unit to provide the necessary depth for installation. 2.
installation - 90CM Step 1 : Prepare installation Do not lift the appliance by the door handle. Remove the fixing screws from the polythene bag on the top of the appliance, but leave the appliance in the base tray packaging until you are ready to install it. Whilst every care is taken to eliminate burrs and raw edges from this appliance, please take care when handling - we recommend the use of protective gloves during installation.
installation - 90CM Dimensions The appliance is designed to fit into a standard 600mm wide housing unit, with minimum internal dimensions as shown. Note: All sizes are nominal, some variation is to be expected.
installation Step 2 & 3 Connect to the electricity supply We recommend that the appliance is connected by a competent person who is a member of a “Competent Person Scheme” & who will comply with the I.E.E. & local regulations. Important: Ensure that you route all mains electrical cables well clear of any adjacent heat source, such as an oven or grill. Warning: This appliance must be earthed. For 60cm BI appliance: 1.
installation Step 4: Secure appliance into housing unit Note : The unit housing the appliance must be appropriately fixed. Ensure that the appliance is centrally located. Take care not to damage the appliance or cabinetry. 70cm only Method 1 : Care must be taken to ensure the appliance runners are sufficiently engaged over the top of the runners on the base units. Method 2 : Insert appliance into the cabinet - ensure that it is engaged over the top of the side runners.
installation Anti-stain trim (if fitted) The anti-stain trim is factory fitted to the edges of the appliance front frame. This trim provides the cabinetry with extra protection from any escape of heat. - When Installing the product, ensure the anti-stain trim is correctly located on the edges of the front frame, before positioning and securing the appliance to the cabinet. - When securing the appliance, the fixing screws provided are driven through the anti-stain trim into the cabinet.
TECHNICAL DATA ELECTRIC PRODUCTS Warning: This appliance must be earthed. Electrical supply/load 220 - 240V ~ 50Hz Databadge is located at the bottom of the front frame, behind the door. 60cm: load = 2.5kW - 3.0kW 70cm / 90cm: load = 5.
customer care FAQs What parts of the appliance can be washed in a dishwasher? • Any enamelled parts such as the grillpan can be cleaned in a dishwasher, as can oven shelves and shelf guides. duce condensation when the oven is cooling down with food inside.
CUSTOMER CARE Customer Care Web Shop Having purchased a superior cooker, hob or hood from us, you’ll naturally want to keep it looking great. And who better to help you care for it than the manufacturer? We offer an extensive range of accessories, components and cleaning products which, will instantly give your cooker a good as new look. range of Bake ware and Cookware essentials including Roasting Pans, Cake Tins and Non-Stick Cooking Liners. For all enquires, please visit our Web Shop at www.gdhaonline.
customer care CHANGING LIGHT BULBS (where fitted) Warning: There is a risk of electric shock, so always make sure you have turned off and unplugged your appliance before starting. Always allow the product to cool down before you change a bulb. Not all appliances have the same number and type of bulbs. Before replacing your bulb, open the oven door and see which type you have. Then use the table to help you change your bulb correctly.
Please keep this handbook for future reference, or for anyone else who may use the appliance.
CUSTOMER CARE To contact Stoves about your appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3740 in case of difficulty within the UK Alternatively general, spares and service information is available from our website at www.stoves.co.uk Please ensure that you have the product’s model no and serial no available when you call.
