OPERATION AND PARTS MANUAL © COPYRIGHT 2003, MULTIQUIP INC. CUTTER 3 SLAB SAWS 13HP & 20HP HONDA GASOLINE ENGINES CC813H20, CS813H20, CS820H20 MODEL # SERIAL # Revision #8 (09/22/06) STOW CONSTRUCTION EQUIPMENT PARTS DEPARTMENT: A DIVISION OF MULTIQUIP INC. POST OFFICE BOX 6254 CARSON, CA 90749 310-537-3700 • 888-252-STOW [888-252-7869] FAX: 310-537-1986 • FAX: 800-556-1986 E-MAIL: STOW@multiquip.com • WWW: stowmfg.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310-631-5032 WARRANTY DEPARTMENT 800-421-1244, EXT. 279 FAX: 310-537-1173 310-537-3700, EXT. 279 SALES DEPARTMENT 310-661-4242 FAX: 310-604-9237 877-289-7869 (877-BUY-STOW) STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — TABLE OF CONTENTS STOW CUTTER 3 SLAB SAW Proposition 65 Warning ................................................... 2 Here's How To Get Help .................................................. 3 Table Of Contents ........................................................... 4 Parts Ordering Procedures ............................................. 5 Specifications ................................................................. 6 Dimensions ..................................................
STOW CUTTER 3 SAW — PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ ❒ ❒ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: ✓ FedEx or UPS Ground Note: Unless otherwise indicated by customer, all ✓ FedEx or UPS Second Day or Third Day orders are treated as “Standard Orders”, and wil
STOW CUTTER 3 SAW — SPECIFICATIONS TABLE 1. SAW SPECIFICATIONS Cutter 3 (Push) Cutter 3 (Self-Propelled) CC813H20 Saw CS813H20 CS820H20 Blade Capacity in. (mm) 20 in. (508 mm) Cutting Depth in. (mm) 7.5 in. (191 mm) Front Wheels in.(mm) 5 in. Dia. x 2 in. Wide (125mm x 50mm) Rear Wheels in.(mm) 8 in. Dia. x 2 in. Wide (125mm x 50mm) Weight lbs.(kg) Engine 280 lbs. (127kg) 280 lbs. (127kg) Honda 13HP GX390K1QWT2 Gasoline Engine 400 lbs. (181.
STOW CUTTER 3 SAW — DIMENSIONS Figure 1. CUTTER 3 Dimensions TABLE 3. DIMENSIONS REFERENCE LETTER DESCRIPTION DIMENSIONS IN. (MM) A Max Height (Handle Bars fully lowered & Front Pointer raised) 36 in. (914 mm.) B Max Handle Bar Height (fully raised) 40 in. (1016 mm.) C Max Length (Handle Bars & Front Pointer fully raised) 43 in. (1092 mm.) D Max Length (Handle Bars fully raised & Front Pointer lowered) 68 in. (1727 mm.) E Max Handle Bar Width 24 in. (610 mm.
STOW CUTTER 3 SAW — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Owner's Manual has been developed to provide complete instructions for the safe and NOTE efficient operation of the Stow Cutter 3 Series Slab Saws.
STOW CUTTER 3 SAW — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the ON/OFF switch in the OFF position, remove key and/or disconnect the spark plug lead before servicing the engine or equipment. Ground the lead to prevent sparks that could ignite a fire. Over Speed Conditions ALWAYS wear approved respiratory protection. Sight and Hearing hazard NEVER tamper with the factory settings of the engine governor or settings.
STOW CUTTER 3 SAW — RULES FOR SAFE OPERATION RULES FOR SAFE OPERATION CAUTI CAUTION Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the Stow Cutter 3 Saw. SAFETY z DO NOT operate or service this equipment before reading this entire manual.
STOW CUTTER 3 SAW — RULES FOR SAFE OPERATION General Safety z ALWAYS read, understand, and follow procedures in Operator's Manual before attempting to operate equipment. z ALWAYS be sure the operator is familiar with proper safety precautions and operating techniques before using the saw. z NEVER leave the machine unattended while running. z Block the unit when leaving or when using on a slope. z ALWAYS check to make sure that the operating area is clear before starting the engine.
STOW CUTTER 3 SAW — RULES FOR SAFE OPERATION Maintenance Safety z NEVER lubricate components or attempt service on a running machine. z ALWAYS allow the machine a proper amount of time to cool before servicing. z Keep the machinery in proper running condition. z Fix damage to the machine immediately and ALWAYS replace broken parts. z Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.
STOW CUTTER 3 SAW — DECALS Machine Safety Decals The Cutter 3 saws are equipped with a number of safety decals (Figure 2). These decals are provided for operator safety and maintenance information. The illustration below shows these decals as they appear on the slab saws. Should any of these decals become unreadable, replacements can be obtained from you dealer. See the "Nameplate and Decals" section for decal placement. Figure 2. Stow Cutter 3 Saw Decals STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — MAJOR COMPONENTS Figure 3. Cutter 3 Major Components Figure 3 displays the location of the various operational control features of the Cutter 3 Saw. Features are dependent on the specific model saw selected. The function of each console component or indicator is explained below: 1. 2. Handle Bars – Used to steer and push the Cutter 3 saw during cutting operations. The handle can be folded down for transportation.
STOW CUTTER 3 SAW — 13HP HONDA ENGINE COMPONENTS INITIAL SERVICING Figure 4. Engine Controls and Components (Honda GX390K1QWT2) The engine (Figure 4) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing. 1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tightened securely. DO NOT over fill.
STOW CUTTER 3 SAW — 20HP HONDA ENGINE COMPONENTS Figure 5. Engine Controls and Components (Honda GX620TXF2) INITIAL SERVICING The engine (Figure 5) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturer's engine manual for instructions & details of operation and servicing. 1. Engine ON/OFF Switch – ON position permits engine starting, OFF position stops engine operations. 2. Fuel Tank - Holds unleaded gasoline.
STOW CUTTER 3 SAW — GENERAL INFORMATION Familiarization Water System The Cutter 3 saws are designed for wet or dry cutting of concrete or asphalt utilizing diamond blades. They have been engineered for general, industrial and high production flat cutting applications. The reinforced steel box frame design adds strength necessary to reduce vibrations while cutting. Minimizing vibrations enhances the performance of the blade and extends the life of the saw.
STOW CUTTER 3 SAW — INSPECTION Before Starting 1. Read safety instructions at the beginning of manual. 2. Clean the saw, removing dirt and dust, particularly the engine cooling air inlet, carburetor and air cleaner. 3. Check the air filter for dirt and dust. If air filter is dirty, replace air filter with a new one as required. 4. Check carburetor for external dirt and dust. Clean with dry compressed air. 3. Insert and remove the dipstick without screwing it into the filler neck.
STOW CUTTER 3 SAW — INSPECTION Hydrostatic Transmission (Self-Propelled models only) An EATON® Model 7 hydrostatic transmission (Figure 8) provides the power for the saw's propulsion system. The transmission drives a sprocket that directly connects the spline drive to the rear wheels. The no load forward/reverse speeds are approximately 80 ft/min. Battery (Self-Propelled models only) - The 12-volt DC battery (Figure 10) is shipped dry, and will require a proper electrolyte level for operation. Figure 10.
STOW CUTTER 3 SAW — INSPECTION -BLADE WARNING 4. Directional Arrow – Check to ensure that the blade is oriented properly on the blade shaft for sawing. Reference the directional arrow in the blade and place it so the direction of rotation “downcuts” with the turn of the shaft. 5. Diamond Segment or Rim – Ensure there are no cracks, dings, or missing portions of the diamond segment/rim. DO NOT use a blade that is missing a segment or a portion of the rim.
STOW CUTTER 3 SAW — INSPECTION - BLADE PLACEMENT NOTE The following steps should be accomplished before placing the diamond blade on the blade shaft. ■ Set the engine ON/OFF switch to the OFF position. ■ Raise the saw to a high position by cranking the Raise/Lower handle in a counterclockwise direction. 3. Blade Nut – Remove the blade nut (4). For reassembly, DO NOT over tighten the blade nut against the outer flange. Tighten blade nut approximately 45-50 ft-lbs/62-69 N/m. 4.
STOW CUTTER 3 SAW — INSPECTION -GUARDS, COVERS & BELTS Guards and Covers Check WARNING V-Belts and Covers D NEVER operate the saw without blade guards and covers (Figures 13, 14 and 15) in place. DO NOT operate with the front of the blade guard raised. The blade exposure cannot exceed 180 degrees during operations. Adhere to the safety guidelines of the American National standards Institute (ANSI) B7.1 and B7.5.
STOW CUTTER 3 SAW — INSPECTION - BELTS & WATER TANK 3. Check V-belt tension (Figure 17) by using a tensionmeter (6.0 - 9.0 lbs.) against the inside belt at a mid point between the two pulleys, or by deflecting the center belt at a mid point 3/8” (10 mm) - 1/2” (13 mm). Water Tank The Cutter 3 saw is equipped with a removable 5-gallon onboard water tank fitted in the top of the console which can be connected to the brass hose fitting on the rear of the operators console (Figure 18).
STOW CUTTER 3 SAW — MANUAL START-UP (13HP HONDA ENGINE) CAUTI CAUTION D NOTE DO NOT attempt to operate the saw until the Safety, General Information and Inspection sections have been read and understood. Depending on engine manufacturer, operating steps may vary. See engine operating manual. The following start-up procedure makes reference to a HONDA 13 HP Engine (Manual Start) WARNING The CLOSED position of the choke lever enriches the fuel mixture for starting a COLD engine.
STOW CUTTER 3 SAW — MANUAL START-UP (13HP HONDA ENGINE) 7. Place the throttle lever (Figure 23) halfway between FAST and SLOW for starting. All sawing is done at full throttle. The engine governor speed is factory set to ensure optimum blade operating speeds. 9. If the engine has started, slowly return the choke lever (Figure 22) to the CLOSED position. If the engine has not started repeat steps 1 through 8. 10. Before the saw is placed into operation, run the engine for several minutes.
STOW CUTTER 3 SAW — ELECTRIC START-UP (20HP HONDA ENGINE) CAUTI CAUTION NOTE DO NOT attempt to operate the saw until the Safety, General Information and Inspection sections have been read and understood. Depending on engine manufacturer, operating steps may vary. See engine operating manual. The following start-up procedure makes reference to a HONDA 20 HP Engine (Electric Start) 1. Ensure the diamond blade has been mounted correctly and that it is raised above the surface you are about to saw. 2.
STOW CUTTER 3 SAW — SHUT-DOWN PROCEDURES Stopping the Engine (13 HP Honda Engine) WARNING NEVER stop the engine while the blade is in the cut, except for extreme emergencies. A sudden stoppage of the engine at high speed while in a cut could damage the blade and/or saw, and may cause injury to the user or other in the operating area. Stopping the Engine (20 HP Honda Engine) 1. Place the forward/reverse speed lever in the NEUTRAL position (Self propelled models only). 2.
STOW CUTTER 3 SAW — OPERATION CAUTI CAUTION NEVER stop the engine while cutting at high speeds, except for extreme emergencies. This can damage your Cutter 3 Saw. Adjusting the Blade Height The Cutter 3 saw uses a manual raise/lower crank handle located on the console with clockwise rotation providing lowering action, and counter-clockwise rotation providing raising and lowering action (Figure 37). Adjusting the Handle Bars To adjust the blade height: The Cutter 3 has adjustable height handle bars.
STOW CUTTER 3 SAW — OPERATION Traveling During Cutting (Push) Push models of the Cutter 3 saw must be manually moved by the operator during cutting operations. Ensure that the handlebars are secured in place on the console and push against them with a controlled amount of force to prevent losing control of the machine. 3. Move the travel lever towards the FORWARD position to increase forward travel speed during cutting (Figure 40). Placing the travel lever fully forward will move the saw at maximum speed.
STOW CUTTER 3 SAW — OPERATION Cutting WARNING The operator MUST wear the appropriate protective equipment and clothing while engaged in sawing. Failure to do so can result in SERIOUS INJURY. DANGER DO NOT operate this machine without the Blade Guard or V-belt Guards in place. While the blade is spinning, DO NOT place hands, feet, or other body parts near the blade to avoid SERIOUS INJURY or DEATH. When cutting, determine the required cutting depth and use an appropriately sized blade.
STOW CUTTER 3 SAW — OPERATION Finishing A Cut Diamond Blades 1. Raise the blade out of the cut by cranking the Raise/Lower handle COUNTER-CLOCKWISE (Figure 37). Raise the blade high enough out of the cut to clear the surface and allow the saw to be maneuvered. Diamond blade sawing consists of cutting WET (using water to cool the blade) or DRY (using the circulating air to cool the blade). Selecting the diamond blade TYPE and GRADE defines how the blade will perform both in cutting speed and blade life.
STOW CUTTER 3 SAW — MAINTENANCE Maintenance Engine air filter: Clean air filter 2 to 3 times daily when DRY cutting. See Engine Owner’s Manual for detailed information. WARNING General maintenance practices are crucial to the performance and longevity of your saw. The extreme environments of sawing operations require routine cleaning, lubrication, belt tensioning, and inspection for wear and damage The following procedures devoted to maintenance can prevent serious saw damage or malfunctioning.
STOW CUTTER 3 SAW — MAINTENANCE General Transmission Care (Self-Propelled Models only) All CUTTER 3 model saws utilize spline gear wheel design coupled with an EATON Model 7 Hydrostatic Transmission that provides forward/reverse propulsion. The simple design of the system keeps maintenance to a minimum. Transmission Reservoir Cup: Check every 8 hours of operation. When the transmission is cold (A), check oil level against the level indicator (see Figure 45).
STOW CUTTER 3 SAW — MAINTENANCE Drive V-Belt Check Adjust V-Belt Alignment/Replacement Pulleys The V-Belts of the Cutter 3 saw have been factory set utilizing precision standards. Operating the saw with less than the specified number of V-belts (See Table 5), or belts that are slipping or are over-tensioned will significantly diminish the performance of the saw, and may cause damage to the blade. The V-belts and their respective pulleys have been professionally aligned at the factory.
STOW CUTTER 3 SAW — MAINTENANCE Blade Shaft Bearing Replacement Reference Figure 50 & Figure 51 for steps 4-9 The Cutter 3 saw is supported by “tapped base lock collar (w/set screw)" self-aligning Blade Shaft Bearings (Figures 51 and 52). These heavy duty bearings support the 1-1/4 blade shaft, and have grease (zerk) points conveniently located for service. 4. Remove Blade Hex Nuts (Figures 50 & 51, item 1) and Outside/Inside Blade Flanges (Figures 50, item 2 & 3) 1.
STOW CUTTER 3 SAW — MAINTENANCE Battery Maintenance Mishandling of the battery shortens the service life of the battery and adds to maintenance cost. When handling the battery do the following: z Be careful not to let the battery electrolyte come in contact with your body or clothing. z Always wear eye protection and rubber gloves, since the battery contains sulfuric acid which burns skin and eats through clothing. z Always check the battery terminals periodically to ensure that they are in good condition.
STOW CUTTER 3 SAW — 13HP ENGINE WIRING DIAGRAM (RECOIL START) Figure 52. 13HP Honda Engine Wiring Diagram STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — 20HP ENG.WIRING DIAGRAM (ELECTRIC START) Figure 52. 20HP Honda Engine Wiring Diagram PAGE 38 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine Troubleshooting (Table 7) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 7.
STOW CUTTER 3 SAW — TROUBLESHOOTING (ENGINE) TABLE 7. ENGINE TROUBLESHOOTING (CONTINUED) SYMPTON "Weak in power" compression is proper and does not misfire. POSSIBLE CAUSE SOLUTION Air cleaner not clean? Clean or replace air cleaner Improper level in carburetor? Check float adjustment, re-build carbureator. Defective Spark plug? Clean or replace spark plug. Defective Spark plug? "Weak in power" compression is proper but misfires. Engine overheats. Rotational speed fluctuates.
STOW CUTTER 3 SAW — TROUBLESHOOTING (BLADE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Blade Troubleshooting (Table 8) information shown below and on the proceeding page. If the problem cannot be remedied, please leave the unit just as it is and consult our company's business office or service plant. TABLE 8.
STOW CUTTER 3 SAW — EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
STOW CUTTER 3 SAW — SUGGESTED SPARE PARTS CUTTER 3 SAW (13HP PUSH) CUTTER 3 SAW (13HP SELF-PROPELLED) 1 to 3 Units 1 to 3 Units Qty. ..... P/N ..................... Description 3 .......... 16052 ................. V-BELTS, DRIVE 1 .......... 29013-001 .......... WRENCH, BOX END 1-1/2 IN. 1 .......... 60087 ................. ROPE, FRONT POINTER 1/4 IN. 2 .......... 15081 ................. GRIPS, HANDLE BAR 1 IN. 1 .......... 06922-003 .......... BLADE SHAFT NUT, RIGHT SIDE 1 .......... 07038-016 ........
STOW CUTTER 3 SAW — NAME PLATE AND DECALS NAME PLATE AND DECALS. PAGE 44 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — NAME PLATE AND DECALS NAME PLATE AND DECALS NO PART NO PART NAME 1 22972-005 DECAL, STOW 2 22972-003 DECAL, STOW 3 22653-003 DECAL, CUTTER 3 4 1997 NAMEPLATE 5 28853-001 DECAL, FORWARD/REVERSE LEVER 6 30263-001 DECAL, PROP.
STOW CUTTER 3 SAW — UNDER CARRIAGE ASSY. UNDER CARRIAGE ASSY. PAGE 46 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — UNDER CARRIAGE ASSY. UNDERCARRIAGE ASSY. NO PART NO 1 28777-352 2 28781-002 3 28782-351 4 28086-001 5 28085-001 6 8151 7 10065-090 8 25181-001 9 8081 10 0447 11 3216 12 0685 13 2621 14 1162 A PART NAME FRAME ASSY. 16”/18”/20” AXLE, REAR & FRONT FRAME, UNDERCARRIAGEE ASSY. WHEEL, 8 X 2 .75 ROLLER BEARING REAR WHEEL, 5 X 2 .75 ROLLER BEARING FRONT WASHER, FLAT SAE 3/4 BEARING PLAIN COLLAR, SET 0.75 X 1.50 X .
STOW CUTTER 3 SAW — BLADE SHAFT ASSY. BLADE SHAFT ASSY. PAGE 48 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — BLADE SHAFT ASSY. BLADE SHAFT ASSY. NO PART NO 1 28807-002 2 28081-001 3 28811-002 4 26928-002 26928-004 5 0125 6 6059 B 7 06922-003 8 06502-012 9 2955 10 0448 11 25172-003 11 12 13 14 15 16 17 23280-001 1528 28841-001 0424 2621 1162 A 16052 17 18 19 20 15897 23250-002 07038-016 15046 PART NAME QTY. REMARKS SPINDLE, BLADE 1 BEARING, PILLOW BLOCK 1.25ID AS206-20 2 FLANGE, BLADE INSIDE 4.0OD X 1.0ID 1 FLANGE, BLADE OUTSIDE 1.0ID X5.0OD X 56 1 FLANGE, BLADE OUTSIDE 1.0ID X4.
STOW CUTTER 3 SAW — LIFTING BALE ASSY. LIFTING BALE ASSY. PAGE 50 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — LIFTING BALE ASSY. LIFTING BALE ASSY. NO PART NO 1 28890-351 1 28890-352 2 28893-001 2 28893-002 3 0205 4 10133 5 10136 6 5283 7 0300 B 8 0202 PART NAME 13HP, LIFT BALE ASSY. 20HP, LIFT BAIL ASSY. BRACE, 13HP BAIL BRACE, 20HP BAIL SCREW, HHC 3/8-16 X 1.0 NUT, NYLOC 3/8-16 WASHER, FLAT SAE 3/8 NUT, NYLOC 5/16-18 WASHER, FLAT SAE 5/16 SCREW, HHC 5/16-18 X 1 ZINC QTY. 1 1 1 1 2 2 4 2 4 2 REMARKS STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — CONSOLE ASSY. (PUSH MODELS) CONSOLE ASSY. (PUSH MODELS) PAGE 52 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — CONSOLE ASSY. (PUSH MODELS) CONSOLE ASSY. PUSH NO PART NO 1 28796-351 2 15081 3 4196 4 0166 A 5 10136 6 28791-351 7 28805-001 8 29013-001 9 1579 10 0181 B 11 0948 12 0205 13 0166 A 14 4001 PART NAME QTY. HANDLE ASSY. 1 GRIP, 1”ID, H/W #40001610055 2 SCREW, HHC 3/8-16 X .75 4 WASHER, LOCK 3/8 MED. 4 WASHER, FLAT SAE 3/8 4 HOUSING ASSY., YELLOW STOW 1 COVER, CONSOLE SIDE, CUTTER 3-YELLOW 1 WRENCH, BOX END 1 1/2 1 SCREW, HHC 1/4-20 X 1/2 4 WASHER, LOCK 1/4 MED.
STOW CUTTER 3 SAW — CONSOLE ASSY. (SELF-PROPELLED MODELS) CONSOLE ASSY. (SELF- PROPELLED MODELS) PAGE 54 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — CONSOLE ASSY. (SELF-PROPELLED MODELS) CONSOLE ASSY. (SELF- PROPELLED MODELS) NO PART NO PART NAME QTY. 1 28796-351 HANDLE ASSY. 1 2 15081 GRIP, 1” ID 2 3 4196 SCREW, HHC 3/8-16 X .75 4 4 0166 A WASHER, LOCK 3/8 MED. 4 5 10136 WASHER, FLAT SAE 3/8 4 6 28091-401 SHIFT CONTROL ASSY. 1 8 28834-001 COVER, REAR 1 9 0131 A SCREW, HHC 1/4-20 X 3/4 2 10 1002 4 NUT, NYLOC 1/4-20 2 11 4001 WASHER, FLAT USS 3/8 PLD 8 12 1579 SCREW, HHC 1/4-20 X 1/2 8 13 0181 B WASHER, LOCK 1/4 MED.
STOW CUTTER 3 SAW — 13HP HONDA ENGINE MOUNT ASSY. 13HP HONDA ENGINE MOUNT ASSY. PAGE 56 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — 13HP HONDA ENGINE MOUNT ASSY. 13HP HONDA ENGINE MOUNT ASSY. NO 1 2 3 4 5 6 7 8 9 PART NO 15868-032 0447 968011 10176 3214 9154 10136 10133 28804-351 PART NAME SCREW, SQHS 1/2-13 X 4, CUP PLAIN WASHER, FLAT SAE 1/2 NUT, HEX FINISH 1/2-13 NUT, NYLOC 1/2-13 SCREW, HHC 1/2-13 X 1 1/4 SCREW, HHC 3/8-16 X 1 3/4 WASHER, FLAT SAE 3/8 NUT, NYLOC 3/8-16 ENGINE BASE ASSY. QTY. 1 9 1 4 4 4 8 4 1 REMARKS STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — 20HP HONDA ENGINE MOUNT ASSY. 20HP HONDA ENGINE MOUNT ASSY. PAGE 58 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — 20HP HONDA ENGINE MOUNT ASSY. 20HP HONDA ENGINE MOUNT ASSY. NO PART NO PART NAME 1 15868-032 SCREW, SQHS 1/2-13 X 4, CUP PLAIN 2 0447 WASHER, FLAT SAE 1/2 3 968011 NUT, HEX FINISH 1/2-13 4 10176 NUT, NYLOC 1/2-13 5 3214 SCREW, HHC 1/2-13 X 1 1/4 6 4370 SCREW, HHC 3/8-16 X 2 1/4 7 10136 WASHER, FLAT SAE 3/8 8 10133 NUT, NYLOC 3/8-16 9 28804-351 ENGINE BASE ASSY. 10 27044-001 SPACER QTY. 1 9 1 4 4 4 8 4 1 2 REMARKS STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — 13HP HONDA ENGINE ASSY. 13HP HONDA ENGINE ASSY. PAGE 60 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — 13HP HONDA ENGINE ASSY. 13HP HONDA ENGINE ASSY. NO PART NO PART NAME QTY. REMARKS 1 15103 ENGINE, HONDA 13HP, GX390K1QWT2 1 2 23665-001 PULLEY, ENGINE 13 HP, 3F3V26X1 ............................ 1 .......... 13HP PUSH MODELS 2 23703-003 PULLEY, ENGINE 13 HP, 4F3V26X1 1 13HP SELF-PROP MODELS 3 6059 B KEY 1/4" SQ. X 2, 1018 STOCK 1 STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — 20HP HONDA ENGINE ASSY. 20HP HONDA ENGINE ASSY. PAGE 62 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — 20HP HONDA ENGINE ASSY. 20HP HONDA ENGINE ASSY. NO PART NO PART NAME 1 15104 ENGINE, HONDA 20HP GX620TXF2 2 28833-002 PULLEY, ENGINE C3 20H20, 4F3V412 3 28099-001 MOUNT, IDLER SPRING 4 923203 SCREW, SHC 1/4-20 X 3/4 5 6059 B KEY 1/4" SQ. X 2, 1018 STOCK 6 28088-002 PULLEY, TRANSMISSION QTY. 1 1 1 2 1 2 REMARKS STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — POINTERS AND COVERS ASSY. POINTERS AND COVERS ASSY. PAGE 64 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — POINTERS AND COVERS ASSY. POINTER AND COVERS ASSY. NO PART NO PART NAME QTY. REMARKS 1 28646-351 BLADE GUIDE WELDMENT 1 2 28649-001 SPANNER BUSHING CSI 1 3 28648-001 WHEEL, 3.00 X 1.25 .50 ID POLY CSI 1 4 28647-001 POINTER 1 5 1456 NUT, HEX FINISH 3/8-16 2 6 10133 NUT, NYLOC 3/8-16 2 7 15114 SLEEVE, SASH 2 8 60087 ROPE, 1/4” NYLON, BRAIDED, WHITE 7 9 0655 SCREW, HHC 5/16-18 X 3/4 7 10 0161 C WASHER, LOCK 5/16 MED.
STOW CUTTER 3 SAW — WATER SYSTEM ASSY. WATER SYSTEM ASSY. PAGE 66 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — WATER SYSTEM ASSY. WATER SYSTEM FROM CONSOLE SP NO PART NO PART NAME QTY. REMARKS 1 12694-008 HOSE CLAMP, SPRING TYPE 7/8 O.D HOSE 4 2 23255-004 HOSE, WATER 1/2 X 37 1 3 23566-001 FITTING, PLASTIC 90 1/2MP X 1/2BARB 1 4 23259-001 VALVE, BALL 1/2 MPT BRASS NIBCO T585-70 1 5 23254-001 FITTING, NIPPLE 1/2MP X 2 GALV. 1 6 16378-009 U-BOLT W/NUTS 1 7 15544 FITTING, BRASS 1/2FP-3/4F GRDN.
STOW CUTTER 3 SAW — BLADE GUARD ASSY. BLADE GUARD ASSY. PAGE 68 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — BLADE GUARD ASSY. BLADE GUARD ASSY. NO PART NO 1 29406352 2 28729001 3 60021 4 0131A 5 10024 6 24642001 7 12694006 8 24778001 9 18626001 10 22129001 11 21168 12 0424 13 0949 14 0181B 15 0948 16 0205 17 0166A 18 10136 PART NAME BLADE GUARD W/A, YELLOW GUARD, SPLASH BLADE HOSE, 3/8ID X 5/8OD BRAIDED PVC “PAC” SCREW, HHC 1/4-20 X 3/4 NUT, NYLOC 1/4-20 Y-CONNECTOR 3/8 HOSE CLAMP, SPRING TYPE 3/4 O.D.
STOW CUTTER 3 SAW — MANUAL RAISE AND LOWER ASSY. (20 IN. ) MANUAL RAISE AND LOWER ASSY. (20 IN.) PAGE 70 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — MANUAL RAISE AND LOWER ASSY. (20 IN. ) JACK SCREW ASSY. 20” BLADE NO PART NO PART NAME 1 28793-352 JACKPOST ASSY. OBS USE 28793352 2 2621 ZERK, GREASE STR. 1/4-28 3 28806-001 JACKSCREW 4 28083-001 BEARING, FLANGE 5 28809-001 SPACER, JACKSCREW 6 4568 PIN, ROLL 3/16 X 1 7 28877-351 SCREW COVER ASSY., YELLOW 8 1579 SCREW, HHC 1/4-20 X 1/2 9 0948 WASHER, FLAT SAE 1/4 10 0181 B WASHER, LOCK 1/4 MED.
STOW CUTTER 3 SAW — BATTERY ASSY. BATTERY ASSY. PAGE 72 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — BATTERY ASSY. BATTERY ASSY. NO PART NO 1 4671 2 28096-001 3 28095-401 4 28093-001 5 28094-001 6 0131 A 7 0948 8 0949 9 0655 10 0161 D 11 0161 C 12 0300 B 13 0181 B PART NAME QTY. BATTERY, WET GR.U1, GT-X GOLD LA 1 BRACKET BATTERY 1 BATTERY HOLD DOWN KIT 425-405 1 CABLE, BATTERY POS 6GA X 42” RING TONGUE 1 STRAP, GROUND 1 SCREW, HHC 1/4-20 X 3/4 2 WASHER, FLAT SAE 1/4 2 NUT, HEX FINISH 1/4-20 PLATED 2 SCREW, HHC 5/16-18 X 3/4 3 NUT, HEX FINISH 5/16-18 3 WASHER, LOCK 5/16 MED.
STOW CUTTER 3 SAW — TRANSMISSION ENGAGE LEVER ASSY. TRANSMISSION ENGAGE LEVER ASSY. PAGE 74 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — TRANSMISSION ENGAGE LEVER ASSY. HYD. TRANSMISSION ENGAGE LEVER ASSY. NO PART NO PART NAME QTY. 1 28825-351 LEVER ASSY. TRANS. ENGAGE 1 2 3360 GRIP, 1/4 X 1 BLACK 1 3 28822-351 MOUNT ASSY., LEVER RED 1 4 0655 SCREW, HHC 5/16-18 X 3/4 4 5 10136 WASHER, FLAT SAE 3/8 6 6 6014 B PIN, COTTER 3/32D X 1.
STOW CUTTER 3 SAW — HYDROSTATIC TRANSMISSION ASSY. HYDROSTATIC TRANSMISSION PAGE 76 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — HYDROSTATIC TRANSMISSION ASSY. HYDROSTATIC TRANSMISSION ASSY. NO PART NO PART NAME 1 20559-001 SPRING, EXT. 3.38FL X 71OD X .105 2 1493 SCREW, HHC 3/8-18 X 3.25 3 28836-001 LINK, RETURN SPRING 4 10133 NUT, NYLOC 3/8-16 5 10136 WASHER, FLAT SAE 3/8 6 1023 SCREW, HHC 3/8-16 X 1 1/4 GR 5 7 15354 TRANSMISSION, HYD EATON 8 1578 KEY, WOODRUFF #3 9 0166 A WASHER, LOCK 3/8 MED. 10 1456 NUT, HEX FINISH 3/8-16 11 28828-351 SHIFT ARM ASSY.
STOW CUTTER 3 SAW — HYDROSTATIC DRIVE ASSY. HYDROSTATIC DRIVE ASSY. PAGE 78 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
STOW CUTTER 3 SAW — HYDROSTATIC DRIVE ASSY. HYDROSTATIC DRIVE ASSY. NO PART NO PART NAME QTY. REMARKS 1 23227-001 SPROCKET, TRANSMISSION 12 TOOTH MACH 1 2 25039 SCREW, SHS 10-24 X 1/4 2 3 23231-503 CHAIN, ROLLER .375 PITCH X 21.75 1 4 10504-035 LINK, CHAIN 1 5 5283 NUT, NYLOC 5/16-18 8 6 28084-001 SPROCKET, 3548 X 3/4 1 7 0126 KEY, WOODRUFF #9 3 8 28832-001 JACKSHAFT 1 9 23284-001 BEARING, FLANGE .
HONDA GX390K1QWT2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 80 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 3 * 4# 5 6 * 7# 8# 9 10 11 12 13 14 15 16 PART NO. 16271ZE2000 17210ZE3505 17218ZE3505 17219HA2405 17230ZE3841 17232891000 17238ZE2310 17239ZE3840 17410ZE3840 17470ZE3841 17475ZE3841 17476ZE3841 90142MB0000 90325044000 90009ZE2003 0405006000 PART NAME QTY. REMARKS GASKET, ELBOW 1 ELEMENT, AIR CLEANER ........................ 1 .........
HONDA GX390K1QWT2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 82 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 16 17 PART NO. 14100ZF6W01 14410ZE3013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE3000 14721ZE3000 14751ZE2003 14771ZE2000 14773ZE2000 14775ZE2010 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 12209ZE8003 PART NAME QTY. REMARKS CAMSHAFT ASSEMBLY .......................... 1 .........
HONDA GX390K1QWT2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 84 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 #+ * 2 * 3 * 4 * 5 * 6 + * 7 * 8 * 9 10 * 11 * 12 * 13 14 15 16 20 22 * 23 * 24 * 25 * 26 * 28 * 31$ 33 * 33 33 * 34 * 35 * PART NO.
HONDA GX390K1QWT2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 86 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO. 2 3 4 5 6 10 * 11 * 12 * 13 * 14 * 15 * 17 * 18 * 21 22 24 * 27 * 28 * 29 PART NO. 16551ZE3000 16555ZE3000 16561ZE3000 16562ZE3000 16570ZE3W20 16571ZE3W00 16574ZE1000 16575ZE2W00 16576891000 16578ZE1000 16581ZE3W00 16584883300 16592883310 90013883000 90015ZE5010 90114SA0000 93500050320A 93500050160A 9405006000 PART NAME QTY. REMARKS ARM, GOVERNOR 1 ROD, GOVERNOR 1 SPRING, GOVERNOR 1 SPRING, THROTTLE RETURN 1 CONTROL ASSY. (REMOTE) ................
HONDA GX390K1QWT2 ENGINE — CRANKCASE ASSY. CRANKCASE COVER ASSY. PAGE 88 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CRANKCASE ASSY. CRANKCASE COVER ASSY. NO. 2 3 4 5 8# 9 10 + * 11 + * 12 + * 13 * 13 * 15 * 16 17 * 18 * 19 20 * 21 * PART NO. 11300ZE3602 11381ZE3801 15600ZG4003 15600735003 15625ZE1003 16510ZE3000 16511ZE8000 16512ZE3000 16513ZE2000 16531ZE2000 16531Z0A000 90602ZE1000 90701HC4000 91201ZE3004 9410106800 957010804000 961006202000 961006207000 PART NAME QTY. REMARKS COVER ASSY., CRANKCASE (Q-TYPE) .........1 ................ INCLUDES ITEMS W/ * GASKET, CASE COVER 1 CAP ASSY.
HONDA GX390K1QWT2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 90 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 2 8 11 12 * PART NO. 13310ZF6W10 13351ZE3010 90745ZE2600 91001ZF6003 PART NAME QTY. REMARKS CRANKSHAFT (Q-TYPE).......................... 1 ......... INCLUDES ITEM W/ * WEIGHT, BALANCER 1 KEY(6.3X6.3X43) 1 BEARING, RADIAL BALL (6207S) 1 STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 92 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 2 4 9 10 12 * 13 * 14 17 18 19 20 21 * 22 23 PART NO. 12000ZF6W13 15510ZE2043 16541ZE3010 90131896650 90446KE1000 91201ZE3004 91201ZE9003 91353671003 9405010000 9410912000 9425110000 957010601200 961006202000 34150ZH7003 90013883000 PART NAME QTY. REMARKS CYLINDER ASSY. (ALERT) ....................... 1 ......... INCLUDES ITEMS W/ * SWITCH ASSY., OIL LEVEL 1 SHAFT, GOVERNOR ARM 1 BOLT, DRAIN PLUG 2 WASHER (8.2X17X0.
HONDA GX390K1QWT2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 94 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 * 3 * 4 * 5 6 7 8 10 11 12 13 14 16 17 18 18 PART NO. 12200ZF6W01 12204ZE2306 12205ZE2305 12216ZE2300 12251ZF6W00 12310ZE3791 12315ZE3840 12391ZE2020 17316611000 90014ZE2000 90042ZE8000 92900080320E 90441ZE2010 9430112200 957011008000 9807955846 9807956846 PART NAME QTY. REMARKS CYLINDER HEAD.............................................1 ................ INCLUDES ITEMS W/ * GUIDE, VALVE (OS) (OPTIONAL) 1 GUIDE, EX.
HONDA GX390K1QWT2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 96 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. 4 7 10 13 15 PART NO. 16731ZE2003 19610ZE3010ZB 19631ZE3W00 36100ZH7003 90013883000 PART NAME CLIP, TUBE COVER, FAN *NH1* (BLACK) SHROUD SWITCH ASSY., ENGINE STOP BOLT, FLANGE (6X12) (CT200) QTY. 1 1 1 1 6 REMARKS STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 98 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 3 7 10 11 PART NO. 19511ZE3000 28450ZE3W11 31100ZE3701 90201ZE3V00 90741ZE2000 PART NAME FAN, COOLING PULLEY, STARTER (SCREEN GRID) FLYWHEEL NUT, SPECIAL (16MM) (1) KEY, SPECIAL WOODRUFF (25X18) QTY. 1 1 1 1 1 REMARKS STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 100 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 3 6 8 9 * 15 17 18 20 22 PART NO. 16854ZH8000 16955ZE1000 17510ZE3010ZB 17620ZH7023 17631ZH7003 91353671003 9405008000 950014500360M 9500202080 957010802500 PART NAME QTY. REMARKS RUBBER, SUPPORTER (107MM) 1 JOINT, FUEL TANK 1 TANK, FUEL *NH1* (BLACK) 1 CAP, FUEL FILLER ................................................ 1 ......... INCLUDES ITEM W/ * GASKET, FUEL FILLER CAP 1 O-RING (13.5X1.5) (ARAI) 1 NUT, FLANGE (8MM) 2 BULK HOSE, FUEL (4.
HONDA GX390K1QWT2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 102 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 2 8 12 17 18 PART NO. 30500ZF6W01 30700ZE1013 31512ZE2000 36101ZE2701 90015883000 90684ZA0601 PART NAME COIL ASSY., IGNITION CAP ASSY., NOISE SUPPRESSOR GROMMET, WIRE WIRE, STOP SWITCH (430MM) BOLT, FLANGE (6X28) CLIP, WIRE HARNESS QTY. 1 1 1 1 2 1 REMARKS STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — MUFFLER ASSY. MUFFLER (1) ASSY. PAGE 104 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — MEFFLER ASSY. MUFFLER (1) ASSY. NO. 2 3 5 6 7 8 9 10 19 22 27 28 31 PART NO. 18310ZE2W61 18320ZE2W61 18330ZE2W00 18331ZE3810 18333ZF6W01 18355ZE2W00 18381ZE2W10 18381ZE2800 90050ZE1000 90055ZE1000 90006ZE2000 9405008000 90055ZE1000 PART NAME QTY. MUFFLER 1 PROTECTOR, MUFFLER 1 PIPE, EX. 1 CAP, MUFFLER 1 GASKET, EX.
HONDA GX390K1QWT2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 106 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 1 2 2 2 2 3 4 4 5 * 6 PART NO. 13010ZF6003 13011ZF6003 13012ZF6003 13012ZF6005 13013ZF6003 13101ZF6W00 13102ZF6W00 13103ZF6W00 13104ZF6W00 13111ZF6W00 13200ZE3010 13200ZE3315 90001ZE8000 90601ZE3000 PART NAME QTY. REMARKS RING SET, PISTON (STD) 1 RING SET, PISTON (OS 0.25) (OPTIONAL) 1 RING SET, PISTON (OS 0.50) (OPTIONAL) 1 RING SET, PISTON (OS 0.50) (OPTIONAL) 1 RING SET, PISTON (0.75) (NIPPON) 1 PISTON (STD) 1 PISTON (OS 0.
HONDA GX390K1QWT2 ENGINE — RECOIL STATER ASSY. RECOIL STARTER ASSY. PAGE 108 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — RECOIL STATER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 10 * 11 * 13 * 14 PART NO. 28400ZE3W01ZB 28410ZE3W01ZB 28421ZE3W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28461ZE2W02 28462ZV7003 90004ZE2W01 90008ZE2003 PART NAME QTY. REMARKS STARTER ASSY., RECOIL *NH1* (BLACK) .............. 1 ......
HONDA GX390K1QWT2 ENGINE — LABELS ASSY. LABELS ASSY. PAGE 110 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX390K1QWT2 ENGINE — LABELS ASSY. LABELS ASSY. NO. 2 4 7 9 12 13 PART NO. 87521ZF6W01 87522ZH9000 87528ZE2810 87532ZH8810 87534ZE1841 87535ZE1840 PART NAME EMBLEM LABEL, CAUTION MARK, CHOKE (EXTERNAL) MARK, OIL ALERT (E) LABEL, AIR CLEANER CAUTION MARK, AIR CLEANER SALES POINT QTY. 1 1 1 1 1 1 REMARKS STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — AIR CLEANER ASSY. PAGE 112 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO PART NO 1 17200ZJ0U70 2 17207ZJ0U70 3 17208ZJ0U70 4 17209ZJ0U70 5 * 17210759013 6 17230759003 * 17232891000 7 8* 17251ZJ0U70 9 17253759003 * 17255758000 10 11 17320ZG5801 * 12 * 17330ZG5801 13 * 90113759003 14 * 90203ZA0800 15 90502759003 * 16 95018750250 17# 935000402100A 18+ 93500040250G 19 957010601200 PART NAME QTY. REMARKS AIR CLEANER ASSY. .................................. 1 ................
HONDA GX620TXF2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 114 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY.
HONDA GX620TXF2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 116 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO PART NO 1 16263ZE3790 3 16500ZJ1000 5 16534ZJ1000 7 16550ZJ1000 8 16555ZJ1000 9 16561ZG1000 10* 16561ZJ1000 11 16562ZJ1000 16570ZJ1000 12 * 16574ZE1000 13 * 16575ZH8000 14 * 16578ZE1000 16 * 16584883300 17 * 16628ZJ1000 22 23* 16649ZJ1000 24 17951ZG1000 25* 90013883000 26 90015ZE3790 27 90114SA0000 * 93500050120H 30 * 93500050250H 31 * 94001050000S 34 35* 9405006000 PART NAME QTY. REMARKS JOINT, ROD 1 CONTROL ASSY. ....................................
HONDA GX620TXF2 ENGINE — CONTROL BOX ASSY. CONTROL BOX ASSY. PAGE 118 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CONTROL BOX ASSY. CONTROL BOX ASSY. NO PART NO 1 * 31612ZE2003 31614ZE2003 2 3* 31620ZG5003 5 32103759000 6 29153-501 7 32340ZJ1812 8 32345ZJ1811 9* 29054-001 10 * 32902892003 11 * 35100ZJ1812 12 # 35111880003 13* 36103ZE1000 87529ZE2860 14 * 15 16 17 18 19* 20 21 22 24 # * 90380MA6010 90676SA8003 91408ZJ1810 93500040120H 94001043900S 9411104800 957010601000 957010601200 9820032500 PART NAME QTY. REMARKS CASE, CONTROL 1 BRACKET, CASE MOUNTING 1 RECTIFIER ASSY.
HONDA GX620TXF2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 120 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO PART NO PART NAME QTY. REMARKS 1 11300ZJ1600 COVER ASSY., CRANKCASE ..... 1 ............. INCLUDES ITEMS W/ * 2 11381ZJ1000 GASKET, CASE COVER 1 4 BEARING A, MAIN OPTIONAL ... 1 ............. SEE HONDA SERVICE MANUAL * 13321ZJ1000 4 13322ZJ1000 BEARING B, MAIN OPTIONAL ... 1 ............. SEE HONDA SERVICE MANUAL * 13323ZJ1000 BEARING C, MAIN OPTIONAL ... 1 ............. SEE HONDA SERVICE MANUAL 4 5* 15120ZJ1000 COVER ASSY.
HONDA GX620TXF2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 122 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO PART NO 1 13310ZJ0U60 4 90401ZJ1000 PART NAME CRANKSHAFT, T-TYPE WASHER, CRANKSHAFT THRUST QTY. 1 1 REMARKS STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 124 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO PART NO 1 12000ZJ1810 2 12356ZJ1000 3 12358ZJ1000 4 12372ZE2300 13321ZJ1000 5 * 5 * 13322ZJ1000 5 13323ZJ1000 7* 15400P0H305PE 9 15558ZJ1010AH 10 25523VD6010 11 31511ZJ1000 12 35480ZJ1812 16 90018PN3000 17 90029888000 18 90031ZE1000 91201ZJ1003 20 22* 91353671003 23 9280014000 24 9405010000 25 9410914000 26 957010607509 27 961406003010 PART NAME QTY. REMARKS CYLINDER ASSY. ........................... 1 .........
HONDA GX620TXF2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 126 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO PART NO 1 12210ZJ1000 2 12220ZJ1000 3 12205ZE2305 * 4 12216ZE2300 5* 12251ZJ1003 6 12311ZJ1000 7 12314ZJ1000 8 1239ZJ1000 9 15611921000 10 17101ZJ1000 11 17151ZJ1003 12 90121ZJ1000 13 91301805000 14 92900080250B 15 9430112200 16 957010603200 17 957011007500 18 957011013000 19 9807956846 PART NAME QTY. REMARKS CYLINDER HEAD, R. ................................... 1 ......... INCLUDES ITEMS W/ * CYLINDER HEAD, L. ............................
HONDA GX620TXF2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 128 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO PART NO 1 19611ZJ1000ZB 4 19612ZJ1000 5 19641ZJ1000 6 19615ZJ0U60 6 19615ZJ0U70 7 19618ZJ0U70 8 19631ZJ1000 9 19632ZJ1000 11 33713GC2000 12 90013883000 13 90018ZE1000 14 90042ZJ1000 15 90104GF6000 16 90113GE4000 17 90320MM5000 18 9405006000 19 957010600800 PART NAME COVER, FAN R8, BRIGHT RED PLATE, R SIDE PLATE, L SIDE HOOD, FAN COVER HOOD, FAN COVER PLUG, FAN COVER HOLE SHROUD, R. SHROUD, L.
HONDA GX620TXF2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 130 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO PART NO 1 19511ZJ1000 2 19513ZJ1000 4 28452ZJ1811 6 28454ZJ1801 7 31110ZJ1801 9 90201ZG3000 10 90401ZG3000 11 90741ZE2000 12 957010801600 PART NAME FAN, COOLING PLATE, COOLING FAN START GRID, SCREEN P.T.O. HOLDER, SCREEN GRID OPTIONAL FLYWHEEL NUT, FLANGE 20MM WASHER, 20MM KEY, SPECIAL WOODRUFF 25X18 BOLT, FLANGE 8X16 QTY. 1 1 1 1 1 1 1 1 4 REMARKS STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 132 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO PART NO 1 30500ZJ1013 2 30518ZJ1000 3 30550ZJ1013 4 30700ZJ1003 6 31630ZJ1801 7 31740ZJ1003 8 63312ZA7000 * 10 90031ZE1000 11 90121952000 12 90658SA0003 13 90673GJ5003 14 915047540003 15 957010600800 PART NAME QTY. REMARKS COIL ASSY., R. IGNITION 1 GROMMET, IGNITION WIRE 2 COIL ASSY., L. IGNITION 1 CAP ASSY., NOISE SUPPRESSOR 2 COIL ASSY., CHARGHE 1 DIODE ASSY., ENGINE STOP .................... 1 .........
HONDA GX620TXF2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 134 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO PART NO 1 06183ZJ1821 2 18310ZJ1003 * 3 * 18321ZJ1003 4 * 18330ZJ1600 5 * 18338ZJ1003 6 18396ZJ1003 * 7 * 957010600800 8 * 957010801400 9 957010802000 * PART NAME QTY. REMARKS MUFFLER KIT, HIGH-B OPTIONAL ............. 1 ......... INCLUDES ITEMS W/ * MUFFLER, HIGH OPTIONAL 1 PROTECTOR, MUFF., HIGH OPTIONAL 1 PIPE, EX. HIGH-L OPTIONAL 1 STAY, MUFFLER, HIGH OPTIONAL 1 BAND ASSY.
HONDA GX620TXF2 ENGINE — PISTON AND CONNECTING ROD ASSY. PISTON & CONNECTING ROD ASSY. PAGE 136 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — PISTON AND CONNECTING ROD ASSY. PISTON & CONNECTING ROD ASSY. NO PART NO PART NAME QTY. REMARKS 1 13010ZE8601 RING SET, PISTON STANDARD 2 1 13011ZE8601 RING SET, PISTON OS 0.25 ............................ 2 ....... OPTIONAL 1 13012ZE8601 RING SET, PISTON OS .050 ............................ 2 ....... OPTIONAL 1 13013ZE8601 RING SET, PISTON OS .075 ............................ 2 ....... OPTIONAL 2 13101ZJ1000 PISTON 2 2 13102ZJ1000 PISTON, OS 0.25 ...................................
HONDA GX620TXF2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 138 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO PART NO 2 15282 3 17510ZE3010ZB 4 17560ZJ0U70 5 17620ZH7023 6 17631ZH7023 7 29219-001 8 90018ZE1000 9 90022888010 10 15229 12 9405008000 13 6004 15 22994-010 16 29066-001 17 957010801600 18 957010802500 19 957010803000 PART NAME JOINT, FUEL TANK FUEL TANK SUPPORT, FUEL TANK CAP, FUEL GASKET, FUEL FILLER CAP COLLAR, FR. ENGINE HANGER BOLT, FLANGE (6X23) BOLT, FLANGE (6X20) O-RING (13.5X1.
HONDA GX620TXF2 ENGINE — FUEL PUMP ASSY. FUEL PUMP ASSY. PAGE 140 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — FUEL PUMP ASSY. FUEL PUMP ASSY. NO PART NO 2 16700ZJ1003 3 16711ZJ1800 5 16910ZE8015 7 19905ZA8701 8 35806752630 9 90617SA0003 10 950014500360M 11 950015500840M 12 950015500840M 13 9500202080 14 950024105008 15 950033600310M 16 957010600800 17 957010601400 PART NAME QTY. REMARKS PUMP ASSY., FUEL 1 STAY, FUEL PUMP 1 FILTER, FUEL 1 GROMMET, WIRE 1 BASE, CLIP 1 CLIP, WIRE HARNESS 1 BULK HOSE, FUEL 4.5X3000 X 4.5X110 1 BULK HOSE, FUEL 5.5X8000 X 5.5X195 1 BULK HOSE, FUEL 5.5X8000 X 5.
HONDA GX620TXF2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 142 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY.
HONDA GX620TXF2 ENGINE — STARTER MOTOR ASSY. STARTER MOTOR ASSY. PAGE 144 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — STARTER MOTOR ASSY. STARTER MOTOR ASSY. NO PART NO 1 31200ZJ1004 2 31243ZJ1800 3 32402ZJ1810 32411KB9930 4+ 5+ 32411402000 6 35850ZJ1811 7 94050060000 9407006080 8+ 9 9430110120 10 957010811000 31213ZJ1004 11 * 31217ZJ1004 12 * 31225ZJ1004 13 * 31226ZJ1004 14 * 31231ZJ1004 15 * 31235ZJ1004 16 * 31237ZJ1004 17 * 31281ZJ1004 18 * 90407ZJ1004 19 * PART NAME QTY. REMARKS MOTOR ASSY., STARTER ................................ 1 ...........
HONDA GX620TXF2 ENGINE — GASKET KIT ASSY. GASKET KIT ASSY. NO ARTWORK AVAILABLE PAGE 146 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — GASKET KIT ASSY. GASKET KIT ASSY. NO PART NO 1 061A1ZJ1000 2 * 12251ZJ1003 3 * 12358ZJ1000 4 * 12391ZJ1000 5 * 16221ZG8000 171541ZJ1003 6 * 7 * 17228ZG8003 8 * 18333ZJ1000 91301805000 9 * PART NAME QTY. REMARKS GASKET KIT ............................................... 1 ......... INCLUDES ITEMS W/ * GASKET, CYLINDER HEAD 2 GASKET, BREATHER COVER 1 GASKET, HEAD COVER 2 GASKET, CARBURETOR 2 GASKET, IN. MANIFOLD 2 GASKET, AIR CLEANER 1 GASKET, EX. PIPE 2 O-RING, 26X2.
HONDA GX620TXF2 ENGINE — LABEL ASSY. LABEL ASSY. PAGE 148 — STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
HONDA GX620TXF2 ENGINE — LABEL ASSY. LABEL NO 1 2 4 5 6 7 ASSY. PART NO 87101ZJ1000 87152ZJ1000 87522ZJ1000 22994-012 22994-013 87532ZH8810 PART NAME MARK, EMBLEM, GX620 LABEL, SPECIFICATION GX620 LABEL, CAUTION LABEL READ OWNER’S MANUAL LABEL, GAS TANK (MATCH/FLAME) MARK, OIL ALERT( E) QTY. 1 1 1 1 1 1 REMARKS STOW CUTTER 3 SAW — OPERATION & PARTS MANUAL — REV.
Effective: July 15, 2003 TERMS AND CONDITIONS OF SALE — PARTS Terms and Conditions of Sale STOW Construction Equipment PAYMENT TERMS Terms of payment for unit sales are 2% 15 days net 30 days from date of invoice unless otherwise specifically stated on our invoice. Parts invoices have terms of net 10 days. Minimum parts billing is $15.00 net. Applicable discounts will be computed on merchandise value only. Late charges will be assessed at prevailing rates.
NOTE PAGE CUTTER 3 SAW — PARTS & OPERATION MANUAL — REV.
OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT ^^^^^*^^^^^^^^^^^^^^^^^^^^^^^^^*^6668 800-478-1244 FAX: 310-537-4259 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310-631-5032 WARRANTY DEPARTMENT 800-421-1244, EXT. 279 FAX: 310-537-1173 310-537-3700, EXT.
