PARTS MANUAL MODELS CS403016 CS403020 CS403026 CS403030 PAVEMENT SAW (DEUTZ F2L2011 DIESEL ENGINE) Revision #0 (02/29/08) To find the latest revision of this publication, visit our website at: www.multiquip.com THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.
PROPOSITION 65 WARNING Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
SILICOSIS/RESPIRATORY WARNINGS WARNING WARNING SILICOSIS WARNING RESPIRATORY HAZARDS Grinding/cutting/drilling of masonry, concrete, metal and other materials with silica in their composition may give off dust or mists containing crystalline silica. Silica is a basic component of sand, quartz, brick clay, granite and numerous other minerals and rocks. Repeated and/or substantial inhalation of airborne crystalline silica can cause serious or fatal respiratory diseases, including silicosis.
TABLE OF CONTENTS CS4030 — STOW SAW Proposition 65 Warning ............................................. 2 Silicosis/Respirator Warnings .................................... 3 Table of Contents ...................................................... 4 Parts Ordering Procedures ....................................... 5 Explanation Of Code In Remarks Column ................ 6 Suggested Spare Parts ............................................. 7 Nameplate and Decals...........................................
PARTS ORDERING PROCEDURES Ordering parts has never been easier! Choose from three easy options: Effective: January 1st, 2006 Order via Internet (Dealers Only): If you have an MQ Account, to obtain a Username and Password, E-mail us at: parts@multiquip.com. Order parts on-line using Multiquip’s SmartEquip website! ■ View Parts Diagrams ■ Order Parts ■ Print Specification Information To obtain an MQ Account, contact your District Sales Manager for more information.
EXPLANATION OF CODE IN REMARKS COLUMN The following section explains the different symbols and remarks used in the Parts section of this manual. Use the help numbers found on the back page of the manual if there are any questions. The contents and part numbers listed in the parts section are subject to change without notice. Multiquip does not guarantee the availibility of the parts listed. * * Numbers Used - Item quantity can be indicated by a number, a blank entry, or A/R.
SUGGESTED SPARE PARTS CS4030 STOW SAW ENGINE PARTS FOR DEUTZ TURBO DIESEL ENGINE 1 TO 3 UNITS WITH DEUTZ TURBO DIESEL ENGINE Qty. P/N Description 1 ....... 37094 .................. SWITCH, TOGGLE F-N-R 1 ....... 37198 .................. SWITCH, EMERGENCY STOP 1 ....... 406021 ................ INDICATOR, ENGINE 1 ....... 37243 .................. SWITCH, ROLLER ARM 1 ....... 37203 .................. SWITCH, ROLLER PLUNGER 2 ....... 406000 ................ SWITCH, ROCKER 2 ....... 37131 ..................
NAMEPLATES AND DECALS NAMEPLATES AND DECALS PAGE 8 — CS4030 STOW SAW • PARTS MANUAL — REV.
NAMEPLATES AND DECALS NAMEPLATES AND DECALS NO. PART NO. PART NAME QTY. REMARKS 1 25491 DECAL, BLADE ROTATION CW .............................. 1 .................. SAFETY ITEM 2 37744 DECAL, STOW CS4030 3 3 37516 DECAL, REFLECTIVE TAPE 1" YELLOW ............... 4.375 ............ SAFETY ITEM 4 SERIAL TAG ............................................................ 1 .................. CONTACT PARTS DEPT. 5 M600002 DECAL, DIESEL FUEL ONLY 1 6 606004 DECAL, GUARD REMOVAL .....................................
CONTROL PANEL DECALS CONTROL PANEL DECALS 1 THROTTLE LIGHTS ON AUXILIARY ON BLADESHAFT DIS-ENGAGE IGNITION SWITCH ENGINE PRE-HEAT GLOW PLUG OFF ON ENGINE PRE-HEAT START TO INCREASE ENGINE SPEED: TO REDUCE ENGINE SPEED: FOR QUICK THROTTLE ACTION: PUSH OR PULL KNOB. TURN KNOB COUNTERCLOCKWISE . TURN KNOB CLOCKWISE. DEPRESS RED BUTTON AND OFF OFF ENGAGE BLADE SPEED TACHOMETER SYSTEMS STATUS 37731 OPERATING INSTRUCTIONS 2 BEFORE STARTING: Check all fluid levels.
CONTROL PANEL DECALS CONTROL PANEL DECALS NO. PART NO. PART NAME 1 37731 DECAL, 4030 INSTRUMENT PANEL 2 37730 DECAL, 4030 CONSOLE OPERATION QTY. 1 1 REMARKS CS4030 STOW SAW • PARTS MANUAL — REV.
ELECTRICAL CONTROL ASSY. ELECTRICAL CONTROL ASSY. PAGE 12 — CS4030 STOW SAW • PARTS MANUAL — REV.
ELECTRICAL CONTROL ASSY. ELECTRICAL CONTROL ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 406000 SWITCH, ROCKER CH# M-58031-01 2 2 406017 IGNITION SWITCH, WITH KEYS ............................ 1 .................. INCLUDES ITEMS W/ * 3 37198 EMERGENCY STOP SWITCH ................................ 1 ..................
CONSOLE MOUNTS ASSY. CONSOLE MOUNTS ASSY. PAGE 14 — CS4030 STOW SAW • PARTS MANUAL — REV.
CONSOLE MOUNTS ASSY. CONSOLE MOUNTS ASSY. NO. PART NO. PART NAME QTY.
REAR CONSOLE ACCESS PANEL ASSY. REAR CONSOLE ACCESS PANEL ASSY. PAGE 16 — CS4030 STOW SAW • PARTS MANUAL — REV.
REAR CONSOLE ACCESS PANEL ASSY. REAR CONSOLE ACCESS PANEL ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 10024 NUT, NYLOC 1/4 X 20 4 * 10930 2 WASHER, FENDER 1/4 X 1-1/4 4 * 3 SCREW, THP 1/4 - 20 X 3/4 SS 4 * 12287 4 29057 DOCUMENT BOX 1 * 37584 5 STRIP, BACKING PLATE SAW CONSOLE 1 6 37220 STRIP, VERTICAL SAW CONSOLE 2 7 37617-353 PANEL, REAR SAW ACCESS 1 * 560020 8 LATCH, REAR SAW ACCESS PANEL 2 * 37616 9 PANEL ASSEMBLY, REAR SAW ACCESS ............. 1 ..................
LIGHT CONNECTOR/DASH ACCESS ASSY. LIGHT CONNECTOR/DASH ACCESS ASSY. PAGE 18 — CS4030 STOW SAW • PARTS MANUAL — REV.
LIGHT CONNECTOR/DASH ACCESS ASSY. LIGHT CONNECTOR/DASH ACCESS ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 0655 SCREW, HHC 5/16 - 18 X 3/4 6 2 12171 SEAL, WEATHERPACK 16-18 GA,GREEN 2 * 3 CONNECTOR, WEATHERPACK 2 PIN MALE 1 * 12176 4 12179 TERMINAL, WEATHERPACK MALE 14-16 GA 2 * 13287 5 NUT, NYLOC 8-32 2 6 37333 HARNESS, LIGHT KIT ............................................ 1 ..................
BELT AND ENGINE GUARDS ASSY. BELT AND ENGINE GUARDS ASSY. PAGE 20 — CS4030 STOW SAW • PARTS MANUAL — REV.
BELT AND ENGINE GUARDS ASSY. BELT AND ENGINE GUARDS ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 0166 SCREW, HHC 3/8 - 16 X 7/8 5 3 15503 KNOB, COMFORT 1 4 37606-353 GUARD, BELT DRIVE .............................................. 1 .................. SAFETY ITEM 5 37610-353 GUARD, ENGINE ..................................................... 1 .................. SAFETY ITEM 8 584011 WRENCH, 15/16 BLADE CLOSED END 1 9 933242 WASHER, FLAT SAE 3/8 GRD 9 YZ 5 CS4030 STOW SAW • PARTS MANUAL — REV.
DEPTH INDICATOR/STOP SWITCH ASSY. DEPTH INDICATOR/STOP SWITCH ASSY. PAGE 22 — CS4030 STOW SAW • PARTS MANUAL — REV.
DEPTH INDICATOR/STOP SWITCH ASSY. DEPTH INDICATOR/STOP SWITCH ASSY. NO. PART NO. PART NAME 1 37598 BASE, 4030 SAW DEPTH INDICATOR 2 560025 KNOB, SAW DEPTH INDICATOR 3 110031 POINTER, CONCRETE SAW DEPTH 4 583059 SHIM, 0.375 OD X 0.25 ID X .020 THK 5 460019 FLANGE, BEARING 0.25 ID X 0.75 OD 6 37155 PULLEY, CABLE .75 OD 7 37240 PULLEY, CABLE .
F-N-R ASSY. F-N-R ASSY. PAGE 24 — CS4030 STOW SAW • PARTS MANUAL — REV.
F-N-R ASSY. F-N-R ASSY. NO. PART NO. 1 * 576003 2 460021 * 3 * 20842 4 579072 * 5 * 926917 6 * 37015 7 37014 * 8 * 37013 9 * 37022 10 37016 * 11 * 37091 12 37024 * 13 * 37025 14 * 37026 15 37021 16 2153 17 37136 18 37299 19 07469-004 20 4683 21 933241 22 2203 23 10019 24 3513 PART NAME QTY.
FUEL ASSY. FUEL ASSY. PAGE 26 — CS4030 STOW SAW • PARTS MANUAL — REV.
FUEL ASSY. FUEL ASSY. NO. PART NO. 1 0205 2 19473 3 19633 4 35022 5 29338 6 29509 7 37128 8 37621 9 37594-353 10 304010 11 368006 12 933242 13 60058 14 0166 15 37224 16 0202 17 933241 18 35022 PART NAME QTY. REMARKS SCREW, HHC 3/8 - 16 X 1.
BATTERY ASSY. BATTERY ASSY. PAGE 28 — CS4030 STOW SAW • PARTS MANUAL — REV.
BATTERY ASSY. BATTERY ASSY. NO. PART NO. 1 0166 2 0655 3 37585 4 37098 5 37258 6 37284 7 37690 8 37692 9 37699 10 37691 11 37688 12 404006 13 915101 14 933241 15 933245 PART NAME QTY. SCREW, HHC 3/8 - 16 X 7/8 1 SCREW, HHC 5/16 - 18 X 3/4 4 BOX, BATTERY 1 RETAINER, BATTERY HOLD-DOWN 1 CLIP, BATTERY RETAINER 1 SCREW, HHC M14 - 2.0 X 20MM GRD 8.8 PLTD 1 CABLE, POSITIVE BATTERY STARTER 1 CABLE, POSITIVE BATT.
HANDLEBARS ASSY. HANDLEBARS ASSY. PAGE 30 — CS4030 STOW SAW • PARTS MANUAL — REV.
HANDLEBARS ASSY. HANDLEBARS ASSY. NO. PART NO. 1 560023 2 560017 3 19977 4 37589 5 37590 PART NAME HANDLEBAR ASSY., CONCRETE SAW GRIP, HANDLEBAR KNOB, CLAMP 1/2 - 13 THREAD SUPPORT, RH SAW HANDLEBAR GUIDE SUPPORT, LH SAW HANDLEBAR GUIDE QTY. 2 2 2 1 1 REMARKS CS4030 STOW SAW • PARTS MANUAL — REV.
WATER SYSTEM ASSY. WATER SYSTEM ASSY. PAGE 32 — CS4030 STOW SAW • PARTS MANUAL — REV.
WATER SYSTEM ASSY. WATER SYSTEM ASSY. NO. PART NO. PART NAME QTY. 1 25827 FITTING, BRASS (F) 3/4 GHT SWIVEL 1/2 MNPT 1 2 26496 FITTING, 90 1/2MP - 1/2FP 2 3 37311 BALL VALVE, BRASS 1/2 MNPT X FNPT 2 4 25607 FITTING, COUPLING 1/2" NPT 2 REMARKS CS4030 STOW SAW • PARTS MANUAL — REV.
ENGINE ASSY. ENGINE ASSY. PAGE 34 — CS4030 STOW SAW • PARTS MANUAL — REV.
ENGINE ASSY. ENGINE ASSY. NO. PART NO. 1 37655 2 2299 3 25591 4 10024 5 933240 6 915004 7 37752 8 37255 9 1174696 10 1174416 11# 21004-003 12 37669 13# 35374 14# 15# 16# 17 35365 18 35374 19 29218 PART NAME QTY. REMARKS ENGINE, ASSEMBLY 4030 ..................................... 1 .................. INCLUDES ITEMS W/# SCREW, HHC M8 - 1.25 X 16MM 1 WASHER, M8 1 NUT, NYLOC 1/4 X 20 2 WASHER, FLAT SAE 1/4 GR 9 YZ 2 SCREW, HHC 1/4 - 20 X 7/8 2 HEAT SHIELD .......................................................
THROTTLE CONTROL ASSY. THROTTLE CONTROL ASSY. PAGE 36 — CS4030 STOW SAW • PARTS MANUAL — REV.
THROTTLE CONTROL ASSY. THROTTLE CONTROL ASSY. NO. PART NO. PART NAME 1 37212 THROTTLE 2 37669 BRACKET, THROTTLE/FNR CABLE 3 37255 LEVER, THROTTLE 4 933240 WASHER, FLAT SAE 1/4 GRD 9 YZ 5 25624 SWIVEL, CABLE END W/ WASHER 6 923113 SCREW, SHC 8 - 32 X 3/8 GRD 8 7 23942-097 WASHER, M6 8 12464 SCREW, HHC M6 - 1.0 X 16MM 9 25634 BULK HEAD ADAPTOR QTY. 1 1 1 1 1 1 2 2 1 REMARKS CS4030 STOW SAW • PARTS MANUAL — REV.
ENGINE MOUNTS ASSY. ENGINE MOUNTS ASSY. PAGE 38 — CS4030 STOW SAW • PARTS MANUAL — REV.
ENGINE MOUNTS ASSY. ENGINE MOUNTS ASSY. NO. PART NO. PART NAME 1 37658 MOUNT, DEUTZ ENGINE RH 2 37100 MOUNT, LH ENGINE 3 37661 PIN, 4030 ENGINE PIVOT 4 37031 BEARING, PLAIN 2.000 ULTRASERT UC200 5 37741 SPACER, 1.00 OD X .75 ID X 1 6 37313 RING, SPIRAL RETAINING WHM-200 7 37310 SCREW, HHC M14-2.0 X 40MM GRD 10.9 NP 8 37146 SCREW, HHC M14-2.0 X 35MM GRD 10.
LIFTING BALE AND AIR CLEANER ASSY. LIFTING BALE AND AIR CLEANER ASSY. PAGE 40 — CS4030 STOW SAW • PARTS MANUAL — REV.
LIFTING BALE AND AIR CLEANER ASSY. LIFTING BALE AND AIR CLEANER ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 302009 HOSE, HUMP 3" X 2.75" 1 2 37761 BRACKET, AIR INTAKE BODY 2 3 940358 WASHER, FLAT 10.5MM X 20MM ZINC 3 4 12832 WASHER, SNUBBING KORF .148099-1 4 5 933244 WASHER, FLAT SAE 1/2 GRD 9 YZ 3 6 16083 NUT, HEX M12 - 1.
PLATFORM GUARDS/REAR POINTER ASSY. PLATFORM GUARDS/REAR POINTER ASSY. PAGE 42 — CS4030 STOW SAW • PARTS MANUAL — REV.
PLATFORM GUARDS/REAR POINTER ASSY. PLATFORM GUARDS/REAR POINTER ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 37682 GUARD, BLADESHAFT PULLEY ............................ 1 .................. SAFETY ITEM 2 583091 STRAP, LOWER BELT GUARD 1 3 583092 WASHER, LOWER BELT PROTECTOR 1 4 933244 WASHER, FLAT SAE 1/2 GRD 9 YZ 4 5 3214 SCREW, HHC 1/2 - 13 X 1-1/4 4 6 915105 SCREW, HHC 3/8 - 16 X 1.0 GRD 8 1 7 110020 POINTER, REAR SAW 1 8 37728 SHIELD, CONCRETE SLURRY 1 9 915105 SCREW, HHC 3/8 - 16 X 1.
WHEEL DRIVE ASSY. WHEEL DRIVE ASSY. PAGE 44 — CS4030 STOW SAW • PARTS MANUAL — REV.
WHEEL DRIVE ASSY. WHEEL DRIVE ASSY. NO. PART NO. 1 37647 2 37095 3 37044 4 37649 5 37138 6 0655 7 0205 8 3214 9 933213 10 37048 11 23858-001 12 933242 13 933244 14 933247 15 10133 16 968011 17 19974 18 966166 19 965105 20 965103 21 37322 22 1456 PART NAME MOUNT, WHEEL MOTOR WHEEL, 12 X 3 TAPERED BORE BRAKE PAD BRAKE PIVOT ROD CAP, WHEEL DUST SCREW, HHC 5/16 - 18 X 3/4 SCREW, HHC 3/8 - 16 X 1.0 SCREW, HHC 1/2 - 13 X 1-1/4 WASHER, FENDER 5/16 X 1 ZINC SPRING, 1.125 X .187 X 4 W/EYELET EYEBOLT, 3/8 - 16 X 2.
FRONT AXLE ASSY. FRONT AXLE ASSY. PAGE 46 — CS4030 STOW SAW • PARTS MANUAL — REV.
FRONT AXLE ASSY. FRONT AXLE ASSY. NO. PART NO. 1 37625 2 933246 3 06505-008 4 37132 5 2621 6 26091 7 2186 8 926064 9 5283 10 1162 A 11 37040 12 933244 13 16629 14 37260 15 915211 16 37138 17 37131 * 460002 18 * 485002 19 * 576003 20 * PART NAME QTY. REMARKS FRONT AXLE W/A 1 WASHER, FLAT 5/8 SAE GRD9 YZ 2 SCREW, HHC 5/8 - 11 X 1.00 2 WHEEL ASSEMBLY, FRONT .................................. 2 ..................
HYDRAULIC SYSTEM ASSY. HYDRAULIC SYSTEM ASSY. PAGE 48 — CS4030 STOW SAW • PARTS MANUAL — REV.
HYDRAULIC SYSTEM ASSY. HYDRAULIC SYSTEM ASSY. NO. PART NO. PART NAME 1 37213 RESERVOIR, 350ML HYDROGEAR 2 306006 FILTER 3 25617 FILTER HEAD, (FILTER MOUNT) 4 37121 LIFT CYLINDER ASSEMBLY 5 37211 CYLINDER, BRAKE 2" X 1.5" STROKE 6 37113 PUMP, 24V DC LIFT HYDROGEAR 7 37104 PUMP, BDP-6 PC-BGCC-AA1Z-XXXX 8 37056 MOTOR, WHEEL - HYDROGEAR HGM-15P-7131 9 37923 NUT, 3/4 - 20 HEX SLOTTED 10 0126 KEY, WOODRUFF #606 3/16 X 3/4 QTY. 1 1 1 1 1 1 1 2 2 2 REMARKS CS4030 STOW SAW • PARTS MANUAL — REV.
HYDRAULIC HOSES AND FITTINGS ASSY. HYDRAULIC HOSES AND FITTINGS ASSY. PAGE 50 — CS4030 STOW SAW • PARTS MANUAL — REV.
HYDRAULIC HOSES AND FITTINGS ASSY. HYDRAULIC HOSES AND FITTINGS ASSY. NO. PART NO. PART NAME QTY. 1 37282 HOSE ASSY., #6 LP 1 2 37695 HOSE ASSY., #4 LP" 1 3 37696 HOSE ASSY., #6 PARFLEX 1 4 37697 HOSE ASSY., #6 PARFLEX 1 5 37698 HOSE ASSY., #4 LP 1 6 37700 HOSE ASSY., #6 LP 1 7 37701 HOSE ASSY., #6-8 LP 1 8 37702 HOSE ASSY., #6-8 LP 1 9 37704 HOSE ASSY., #6 LP 1 10 37705 HOSE ASSY., #4 LP 1 11 37708 HOSE ASSY., #6 LP 1 12 37709 HOSE ASSY., #4 LP 1 13 37710 HOSE ASSY., #4 LP 1 14 37711 HOSE ASSY.
FRONT POINTER ASSY. FRONT POINTER ASSY. PAGE 52 — CS4030 STOW SAW • PARTS MANUAL — REV.
FRONT POINTER ASSY. FRONT POINTER ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 37651 POINTER 1 2 582008 BUSHING, FLANGE 1.0 OD X .75 ID 4 3 500005 WHEEL, POINTER 6" X 1" 1 4 37178 AXLE, POINTER WHEEL 1 5 926006 SCREW, SQHS CP 1/4 - 20 X1/2 2 6 15503 KNOB, COMFORT GRIP STAR 1 7 110038 SAW POINTER 15" RH FRONT 1 8 1456 NUT, HEX FINISH 3/8 - 16 1 9 10133 NUT, NYLOC 3/8 - 16 ............................................... 1 ..................
BELT DRIVE ASSY. BELT DRIVE ASSY. PAGE 54 — CS4030 STOW SAW • PARTS MANUAL — REV.
BELT DRIVE ASSY. BELT DRIVE ASSY. NO. 1 3# 4 5# 6# 7 8 9 10 11 12 13 14 15 15 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 37137 37002 37319 37320 923201 37267 21004-003 37734 582020 460030 582019 10057-061 37269 37266 37576 582012 915315 915316 10138 926919 37268 933242 1456 37735 924289 10133 939978 938422 37685 33 37169 34 34 35 36 36 36 36 37 38 39 40 37675 37676 37577 37574 540065 540049 37575 37671 926790 25992 37834 * PART NO. 37001 37571 PART NAME QTY.
DRIVE PULLEY ASSY. DRIVE PULLEY ASSY. PAGE 56 — CS4030 STOW SAW • PARTS MANUAL — REV.
DRIVE PULLEY ASSY. DRIVE PULLEY ASSY. NO. PART NO. 1 * 37566 1# 37570 2 # * 37567 3 # 35314 * 4 # * 35315 5 # * 37568 6 # 35318 * 7 # * 37035 8 # * 915004 9 # 933240 * 10 37565 10 37569 PART NAME QTY. REMARKS PULLEY, 3.03 6 3V 4.5 1A ....................................... 1 ............. FITS 26", 30", BELT DRIVE PULLEY, 3.7 6 3V 4.5 1A ......................................... 1 .............
BLADE SHAFT ASSY. BLADE SHAFT ASSY. PAGE 58 — CS4030 STOW SAW • PARTS MANUAL — REV.
BLADE SHAFT ASSY. BLADE SHAFT ASSY. NO. PART NO. 1 * 37672 2 37673 * 3 * 06502-010 4 933243 * 5 * 421001 6 * 583026 7 577009 * 8 * 25695 9 * 25690 10 460010 * 11 * 39460011 12 480006 * 13 * 480007 14 * 485003 15 486001 * 16 * 576006 17 * 578135 18 576007 * 19 * 925382 20 969314 * 21 37671 PART NAME QTY.
16", 20", 26" BLADE GUARD ASSY. 16", 20", 26" BLADE GUARD ASSY. PAGE 60 — CS4030 STOW SAW • PARTS MANUAL — REV.
16", 20", 26" BLADE GUARD ASSY. 16", 20", 26" BLADE GUARD ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 200004 BLADEGUARD W/A, 16" REAR HALF 1 * 200008 1# BLADEGUARD W/A, 20" REAR HALF 1 1$ 200010 BLADEGUARD W/A, 26" REAR HALF 1 2 200003 BLADEGUARD W/A, 16" FRONT HALF 1 * 2# 200007 BLADEGUARD W/A, 20" FRONT HALF 1 2$ 200009 BLADEGUARD W/A, 26" FRONT HALF 1 3 #$ 582040 BUSHING, BLADEGUARD HINGE DELRIN 1 * 4 #$ 200019 FLAP, MUD BLADEGUARD ..................................... 1 ..................
30" BLADE GUARD ASSY. 30" BLADE GUARD ASSY. 8 18 3 12 14 7 13 16 17 4 1 15 2 17 6 16 10 11 19 5 PAGE 62 — CS4030 STOW SAW • PARTS MANUAL — REV.
30" BLADE GUARD ASSY. 30" BLADE GUARD ASSY. NO. 1# 2# 3# 4# 5# 6# 7# 8# 9# 10# 11# 12# 13# 14# 15# 16# 17# 18# 19 PART NO. 200012 200011 582039 37395 200019 0131 A 26250 06503-030 10176 10024 10930 370456 2113 37396 1618 923144 22129-001 37509 37338 PART NAME QTY. REMARKS BLADEGUARD W/A, 30" REAR HALF 1 BLADEGUARD W/A, 30" FRONT HALF 1 BUSHING, BLADEGUARD HINGE DELRIN 1 MANIFOLD, WATER LARGE 1 FLAP, MUD BLADEGUARD ..................................... 1 ..................
TERMS AND CONDITIONS OF SALE — PARTS Terms and Conditions of Sale STOW Construction Equipment PAYMENT TERMS Terms of payment for unit sales are 2% 15 days net 30 days from date of invoice unless otherwise specifically stated on our invoice. Parts invoices have terms of net 10 days. Minimum parts billing is $15.00 net. Applicable discounts will be computed on merchandise value only. Late charges will be assessed at prevailing rates.
NOTES CS4030 STOW SAW • PARTS MANUAL — REV.
PARTS MANUAL HERE’S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310-631-5032 WARRANTY DEPARTMENT 800-421-1244, EXT. 279 FAX: 310-537-1173 310-537-3700, EXT. 279 SALES DEPARTMENT 310-661-4242 FAX: 310-604-9237 877-289-7869 (877-BUY-STOW) © COPYRIGHT 2008, MULTIQUIP INC.
