PARTS AND OPERATION MANUAL A D I V I S I O N O F M U LT I Q U I P I N C. PLASTER / MORTAR MIXER © COPYRIGHT 2002, MULTIQUIP INC. MS20H (Steel-Gasoline) MS20E (Steel-Electric) Effective S/N SEC55001 Revision #3 (08/10/06) A D I V I S I O N O F M U LT I Q U I P I N C. STOW CONSTRUCTION EQUIPMENT A DIVISION OF MULTIQUIP INC. POST OFFICE BOX 6254 CARSON, CALIFORNIA 90749 310-537-3700 • 888-252-STOW [888-252-7869] FAX: 310-537-1986 • FAX: 800-556-1986 E-MAIL: stow@multiquip.com • WWW: stowmfg.
Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are: Leadfromlead-basedpaints. Crystallinesilicafrombricks. Cementandothermasonryproducts. Arsenicandchromiumfromchemically treatedlumber.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
TABLE OF CONTENTS Here's How To Get Help ........................................... 3 Table Of Contents .................................................... 4 Parts Ordering Procedures ...................................... 5 Safety Messages Alert Symbols ........................... 6-7 Rules For Safe Operation ................................... 8-10 Operation and Safey Decals .................................. 11 Specifications .........................................................
PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ ❒ ❒ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: ✓ FedEx or UPS Ground Note: Unless otherwise indicated by customer, all ✓ FedEx or UPS Second Day or Third Day orders are treated as “Standard Orders”, and will ship within 24 hou
MS-20 MIXER — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. NOTE This Owner's Manual has been developed to provide complete instructions for the safe and efficient operations of the MQ STOW mortar and plaster mixer.
MS-20 MIXER — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the ON/OFF switch in the OFF position, disconnect the spark plug lead before servicing the engine or equipment. Ground the lead to prevent sparks that could ignite a fire. ALWAYS wear approved respiratory protection. Equipment Damage Messages Sight and Hearing hazard ALWAYS wear approved eye and hearing protection.
MS20H/MS20E MIXER — RULES FOR SAFE OPERATION CAUTION: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating the MS20H/MS20E mortar and plaster mixers: GENERAL SAFETY ■ DO NOT operate or service this equipment before reading this entire manual.
MS20H/MS20E MIXER — RULES FOR SAFE OPERATION ■ Stop the engine when leaving the mixer unattended. ■ Block the unit when leaving or when using on a slope. ■ Maintain this equipment in a safe operating condition at all times. Transporting ■ ALWAYS shutdown engine before transporting. ■ Tighten fuel tank cap securely and close fuel cock to prevent fuel from spilling. ■ ALWAYS stop the engine before servicing, adding fuel and oil. ■ Drain fuel when transporting mixer over long distances or bad roads.
MS20H/MS20E MIXER — RULES FOR SAFE OPERATION Emergencies ■ ALWAYS know the location of the nearest fire extinguisher. ■ In emergencies always know the location of the nearest phone or keep a phone on the job site. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency. ■ ALWAYS know the location of the nearest and first aid kit. PAGE 10 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
MS20H/MS20E MIXER — OPERATION AND SAFETY DECALS Machine Safety Decals The MQ STOW mortar and plaster mixer is equipped with a number of safety decals. These decals are provided for operator safety and maintenance information. Figure 1 below illustrates these decals as they appear on the machine. Should any of these decals become unreadable, replacements can be obtained from your dealer. Figure 1. Mixer Operation and Safety Decals MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
MS20H/MS20E MIXER — SPECIFICATIONS Table 1. MS20H/MS20E Mixer Specifications Capacity 7.0 cu. ft (198 liters) Bag Capacity 1-1/2 to 2-1/2 bags Weight MS20H 624 lbs. (283 kg.) Weight MS20E 613 lbs. (278 kg.) Length w/Tow Bar x W x H 64 x 55.5 x 56 in. (162 x 141 x 142 cm.) Height W/Dump Handle 75 in. (191 cm.) Discharge Height 75 in. (191 cm.) Drive V-Belt/Gear Dump Action Manual Table 2.
MS20H/MS20E MIXER — GENERAL INFORMATION GENERAL GASOLINE ENGINE CARE The MQ STOW Model MS20H (Honda GX240K1) gasoline engine) and MS20E (electric motor) plaster and mortar mixers are shipped completely assembled and have been factory tested. For care and operation of the gasoline engine, refer to the engine manufacturer’s operating instructions furnished with the engine. We recommend draining and refilling the engine crankcase at least every thirty hours of operation. Check the engine oil level daily.
MS20H/MS20E MIXER — BASIC ENGINE COMPONENTS Figure 2. Engine Controls and Components INITIAL SERVICING 5. The engine (Figure 2) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers Engine manual for instructions & details of operation and servicing. Fuel Valve Lever – OPEN to let fuel flow, CLOSE to stop the flow of fuel. 6. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions. The choke enriches the fuel mixture. 1.
MS20H/MS20E MIXER — ELECTRIC MOTOR Electric Motor For maintenance care and operation of the electric motor, refer to your electric motor instruction booklet furnished with the motor. Protect the electric motor from dust as much as possible and keep ventilating openings clean. CAUTION: ■ DO NOT spray water at any time on the electric motor. ■ DO NOT operate electric motor in a explosive environment. The electric motor used in this mixer is a single-phase 1.5 HP motor.
MS20H/MS20E MIXER — ELECTRIC MOTOR Figure 3. Single Phase Electric Motor with 18 inch Pigtail Cable PAGE 16 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
MS20H/MS20E MIXER — CONTROLS 8. Mixing Paddles — Used in the mixing of material. This unit uses four different types of paddles to provide a fast uniform mix. 9. Bag Cutter— This feature allows compound mixing bags to be opened easily, therefore allowing the contents of the bag to fall directly into the mixing drum. 10. Safety Grill — Provided for operator safety. This safety grill is designed to keep hands and solid objects out of the mixing drum when in use.
MS20H/MS20E MIXER — TOWING GUIDELINES Towing Safety Precautions CAUTION : ■ Check with your county or state safety towing regulations department before towing your mortar and plaster mixer. To reduce the possibility of an accident while transporting the mixer on public roads, always make sure that the trailer and the towing vehicle are in good operating condition and both units are mechanically sound.
MS20H/MS20E MIXER — SAFETY CHAIN CONNECTION CAUTION Always Tow with a Safety Chain NEVER! tow the mixer with the safety chain removed. The safety chain is intended to prevent complete separation of the mixer from the towing vehicle in the event of a tow bar failure. Reference Figure 5 for the installation of the safety chain. Tow Bar to Mixer Connection 1. Insert the tow bar through the round opening at the bottom of the mixer stand.
MS20H/MS20E MIXER — TRAILER SAFETY GUIDELINES Tires/Wheels/Lug Nuts Tires and wheels are a very important and critical components of the trailer. When specifying or replacing the trailer wheels it is important the wheels, tires, and axle are properly matched. CAUTION : DO NOT attempt to repair or modify a wheel. DO NOT install an inter-tube to correct a leak through the rim.
MS20H/MS20E MIXER — TRAILER SAFETY GUIDELINES Lug Nut Torque Requirements It is extremely important to apply and maintain proper wheel mounting torque on the trailer. Be sure to use only the fasteners matched to the cone angle of the wheel. Proper procedure for attachment of the wheels is as follows: 1. Start all wheel lug nuts by hand. 2. Torque all lug nuts in sequence. See Figure 8. DO NOT torque the wheel lug nuts all the way down.Tighten each lug nut in 3 separate passes as defined by Table 6.
MS20H/MS20E MIXER — PADDLE BLADE ADJUSTMENT Adjust paddles as shown in Figure 9. Figure 9. Paddle Blade Adjustment, Steel Drum PAGE 22 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
MS20H/MS20E MIXER — PRE-INSPECTION CAUTION NEVER operate the mixer in a confined area or enclosed area structure that does not provide ample free flow of air. ALWAYS wear approved eye and hearing protection before operating the mixer. NEVER place hands or feet inside the guard cover while the engine is running. ALWAYS shut the engine down before performing any kind of maintenance service on the trowel. It is recommended that the mixer's kill switch be used to stop the engine after every use.
MS20H/MS20E MIXER — PRE-INSPECTION Explosive Fuel Fuel Check If your mixer has a gasoline engine, determine if the engine fuel is low. If fuel is low, remove the fuel filler cap and fill with unleaded gasoline. Motor fuels are highly flammable and can be dangerous if mishandled. DO NOT smoke while refueling. DO NOT attempt to refuel the trowel if the engine is hot! or running. 1. Remove the gasoline cap located on top of fuel tank. 2. Visually inspect to see if fuel level is low.
MS20H/MS20E MIXER — INITIAL START-UP This section is intended to assist the operator with the initial start-up of the MS-20H (gasoline) or MS20E (electric) mixer. It is extremely important that this section be read carefully before attempting to use the mixer in the field. 2. To start a cold engine, move the choke lever (Figure 13) to the CLOSED position. DO NOT use your mixer until this section is thoroughly understood.
MS20H/MS20E MIXER — INITIAL START-UP 4. Turn the engine switch (Figure 15) to the ON position. CAUTION: Make certain the drum lock pin (Figures 18 and 19) is placed to the right (when viewing the mixer from the towpole end) of the drum stop block which is welded to the front side of the drum. Also make sure lock pin is fully engaged (locked). This will prevent the drum from tipping. 5. Figure 15. Engine ON/OFF Switch Located on the engine cover is the main start/stop switch (Figure 16).
MS20H/MS20E MIXER — INITIAL START-UP 8. Place the belt slip lever (Figure 21) in the mix position. This will tilt the engine placing tension on the V-belts enabling the shaft to rotate. Figure 22. Drum Lock Pin (Left Position) Figure 21. Belt Slip Lever (Mix Position) Starting (electric only) 1. Using an adequate size extension cord (see Table 4), connect one end of the extension cord to the plug on the electric motor, connect the other end to the power source.
MS20H/MS20E MIXER — MAINTENANCE WHEEL BEARINGS After every 3 months of operation, remove the hub dust cap and inspect the wheel bearings. Once a year, or when required, disassemble the wheel hubs remove the old grease and repack the bearings forcing grease between rollers, cone and cage with a good grade of high speed wheel bearing grease (never use grease heavier than 265 A.S.T.M. penetration (“No. 2.
MS20H/MS20E MIXER — TROUBLESHOOTING (ENGINE) Practically all breakdowns can be prevented by proper handling and maintenance inspections, but in the event of a breakdown, please take a remedial action following the diagnosis based on the Engine, Mixer and Electric Motor Troubleshooting (Tables 8, 9 and10) information shown below and on the proceeding pages. If the problem cannot be remedied, please leave the unit just as it is and consult or company's service department. TABLE 8.
MS20H/MS20E MIXER — TROUBLESHOOTING (ENGINE) TABLE 8. ENGINE TROUBLESHOOTING (CONTINUED) SYMPTOM Insufficient power output "compression" and overheats Burns to much fuel Exhaust color is continiously "WHITE" Exhaust color is continiously "BLACK" POSSIBLE PROBLEM SOLUTION Malfunction in cooling fan? Check or replace cooling fan. Air in-take filter clogged? Clean or replace air in-take filter. Over accumulation of exhaust products? Clean and check valves. Check muffler, replace if necessary.
MS20H/MS20E MIXER — TROUBLESHOOTING (MIXER/MOTOR) TABLE 9. MIXER TROUBLESHOOTING SYMPTOM POSSIBLE PROBLEM SOLUTION Worn or defective V-belt? Replace V-belt. Adjustment lever mis-aligned? Check position of adjustment lever. Adjust if necessary. Worn or defective paddle shaft seals? Replace seals. Defective or worn drum suppor t brackets? Apply grease to bracket or replace. Blades adjusted too tight. Adjust blades until they almost touch side walls of drum. Blades will not rotate.
MS20H/MS20E MIXER — WIRING DIAGRAM (ELECTRIC MOTOR) Figure 22. Electric Motor Wiring Diagram PAGE 32 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
NOTE PAGE MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Section 1: Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
MS20H/MS20E MIXER — SUGGESTED SPARE PARTS MS20H/MS20E MIXER 1 TO 3 UNITS WITH HONDA GX240K1HA2 ENGINE Qty. P/N Description 2 ............ 491010 ............ RUBBER LATCH ASSY. 1 ............ 503640 ............ V-BELT, HONDA 8.0 HP 1 ............ 491112 ............ V-BELT, ELECTRIC MOTOR 1 ............ 25647-503 ...... WIPER KIT 2 ............ 3065 ................ SEAL, AXLE 1 ............ 29173-001 ...... STOP SWITCH 3 ............ 9807956846 .... SPARK PLUG HONDA 8.0 HP 3 ............ 17210ZE2505 .
MS20H/MS20E MIXER — NAMEPLATE AND DECALS NAMEPLATE AND DECALS. PAGE 36 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
MS20H/MS20E MIXER — NAMEPLATE AND DECALS NAMEPLATE AND DECALS. NO PART NO PART NAME 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 11 * 12 * 13 DECAL: STOW (MULTIQUIP) 2 DECAL: WARNING 1 DECAL: PROP. 65 1 DECAL: KEEP COVER CLOSED 1 DECAL: CAUTION READ 1 DECAL: BELT SLIP LEVER 1 DECAL: WARNING GRATE 1 DECAL: PUSH IN STOP 1 DECAL: NAMEPLATE ....................... 1 ............ CONTACT MQ PARTS DEPT. DECAL: CAUTION, DRUM LOCK 1 DECAL: WARNING TOW POLE 1 KIT, DECAL ....................................... 1 ...........
MS20H/MS20E MIXER — HONDA ENGINE ASSY. HONDA ENGINE ASSY. PAGE 38 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
MS20H/MS20E MIXER — HONDA ENGINE ASSY. HONDA ENGINE ASSY. NO PART NO PART NAME 11 20 27 28 29 32 33 34 42 66 94 97 99 98 100 102 103 104 106 107 108 121 POWER MOUNT SPRING 1 PILLOW BLOCK BEARING 2 FLAT WASHER 3/8 44 LOCK WASHER 3/8 50 HEX NUT 3/8-16 50 FLAT WASHER 5/16 6 LOCK WASHER 5/16 6 HEX NUT 5/16-18 6 CAP SCREW 3/8-16 x 1-3/4 4 CAP SCREW 5/16 - 18 x 2 ............... 2 ............ B & S 7.0 HP SQUARE KEY 1/4 x 1-1/2 3 ENGINE- 8 H.P. HONDA .................. 1 ............
MS20H/MS20E MIXER — ELECTRIC MOTOR ASSY. (ELECTRIC) ELECTRIC MOTOR ASSY. PAGE 40 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
MS20H/MS20E MIXER — ELECTRIC MOTOR ASSY. (ELECTRIC) ELECTRIC MOTOR ASSY. NO PART NO PART NAME QTY. 20 27 28 29 32 33 34 82 83 84 92 93 94 95 99 100 101 PILLOW BLOCK FLAT WASHER 3/8 LOCK WASHER 3/8 HEX NUT 3/8-16 FLAT WASHER 5/16 LOCK WASHER 5/16 HEX NUT 5/16-18 MOTOR & CONTROL ASSY.
MS20H/MS20E MIXER — STEEL TUB ASSY. STEEL TUB ASSY. PAGE 42 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
MS20H/MS20E MIXER — STEEL TUB ASSY STEEL TUB ASSY. NO PART NO PART NAME QTY. 2 3 6 7 8 9 10 13 15 17 19 21 22 23 24 26 27 28 29 51 53 54 56 65 86 88 90 91 109 110 DRUM GRATE TRUNNION HUB LIFT BAR SEALED BEARING RETAINING RING DRUM HANDLE MAIN GEAR SPACER DRUM HANDLE GRIP SPECIAL WASHER SHAFT SEAL MAIN GEAR FLAT WASHER 3/8 DRUM BEARING ASSY.
MS20H/MS20E MIXER — PADDLE SHAFT ASSY. PADDLE SHAFT ASSY. CENTER ENGINE END 2 45 64 38 63 26 TOW END ENGINE END 64 3 35 63 47 43 36 1 26 39 27 46 28 29 37 27 44 40 26 28 29 39 40 27 CENTER TOW END 28 29 NOTES: WHEN ORDERING SCRAPPER 1 AND WIPER (SHORT) SEE ITEMS 43 AND 44 TOW END. WHEN ORDERING SCRAPPER 2 AND WIPER(LONG) SEE ITEMS 39 AND 40 CENTER TOW END. WHEN ORDERING SCRAPPER 3 AND WIPER (LONG) SEE ITEMS 39 AND 40 ENGINE END.
MS20H/MS20E MIXER — PADDLE SHAFT ASSY. PADDLE SHAFT ASSY. NO PART NO 26 * 27 * 28 * 29 * 35 * 36 * 37 * 38 * 39 # * 40 * 43 # * 44 * 45 46 47 63 64 17985-010 07030-006 07029-006 07033-006 29263-501 29263-504 29263-502 29063-503 20726-001 20725-001 20048-001 20111-001 29059-002 06513-026 29063-351 07029-108 07037-108 29285-503 25647-503 PART NAME QTY. REMARKS CARRIAGE BOLT 3/8-16 x 1-1/4 22 FLAT WASHER 3/8 44 LOCK WASHER 3/8 50 HEX NUT 3/8-16 50 PADDLE ASSY. TOW POLE END 1 PADDLE ASSY.
MS20H/MS20E MIXER — AXLE ASSY. AXLE ASSY. PAGE 46 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
MS20H/MS20E MIXER — AXLE ASSY. AXLE ASSY. NO PART NO PART NAME 20 27 * 28 29 31 41 47 69 73 75 77 114 507444 EM903012 EM903113 3065 8115 0183 530032 500617 EM941306 502246 3005 3469 AXLE WASHER 2 BEARING CUP 2 BEARING CONE 2 SEAL 2 WHEEL NUT 10 COTTER PIN 5/32 x 1-1/2 3 AXLE 1 U-BOLT AXLE MNT. 2 HUB ASSY. ............................................................... 2 ............ INCLUDES ITEM W/ * SLOTTED HEX NUT 1-20 2 WHEEL & TIRE ASSY. -12” 2 DUST COVER 2 QTY.
MS20H/MS20E MIXER — FRAME ASSY. FRAME ASSY. PAGE 48 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
MS20H/MS20E MIXER — FRAME ASSY. FRAME ASSY. NO PART NO PART NAME 1 2 3 4 4 4 4 29016-351 3215 10176 27071-351 26149-351 HBC-1 HLC-1 5 12 14 41 48 49 50 55 56 57 58 60 61 63 64 69 74 85 89 109 110# 111# 111# 111A# 112 20567-352 29277-351 20278-001 07028-057 06505-028 06505-024 07418-010 07029-010 07033-010 07030-010 22856-001 28986-001 22538-001 TBD 492589 500617 07030-012 25398-001 29242-001 07028-055 MAIN FRAME UNIT 1 BOLT 1/2 x 13 x 3-1/2 1 NUT, NYLOCK 1/2-13 1 BALL HITCH TOW POLE 1-1/2" ID .......
MS20H/MS20E MIXER — ENGINE COVER ASSY. CABINET ASSY. PAGE 50 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
MS20H/MS20E MIXER — ENGINE COVER ASSY. ENGINE COVER ASSY. NO PART NO PART NAME 16 22 28 29 62 111 112 115 118 29280-501 08602-006 07029-006 07033-006 06501-008 29173-001 29174-001 491010 23342-523 ENGINE HOUSE ASSY. 1 FLAT WASHER 3/8 12 LOCK WASHER 3/8 50 HEX NUT 3/8-16 50 CAP SCREW 3/8 - 16 x 1 12 STOP SWITCH 1 RED KNOB 1 LATCH ASSY. 2 WIRE ASSY. GROUND LEAD ...............1 ..... HONDA, B & S QTY. REMARKS MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 52 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 3 * 5 6 8# 9# 10 12 13 14 15 PART NO. 16271ZE2000 17210ZE2505 17218ZE2505 17231ZH9820 17232891000 17238ZE2310 17239ZE1000 17410ZE2020 90203ZA0800 90325044000 90009ZE2003 9405006000 PART NAME QTY. REMARKS GASKET, ELBOW ..................................... 1 ............. INCLUDES ITEM W/ * ELEMENT, AIR CLEANER, DUAL 1 FILTER, OUTER 1 COVER, AIR CLEANER 1 GROMMET, AIR CLEANER 1 COLLAR, AIR CLEANER 2 COLLAR B, AIR CLEANER 1 ELBOW COMP.
HONDA GX240K1HA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 54 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 1 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 PART NO. 14100ZE2W01 14100ZE2306 14410ZE2013 14431ZE2010 14441ZE2000 14451ZE1013 14568ZE1000 14711ZE2000 14721ZE2000 14751ZE2003 14771ZE2000 14773ZE2000 14781ZE2000 14791ZE2010 90012ZE0010 90206ZE1000 PART NAME QTY. REMARKS CAMSHAFT ASSY. ................................... 1 .............
HONDA GX240K1HA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 56 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 + * 2 * 3 * 5 * 6 + * 7 + * 8 * 9 * 10 * 11 * 12 * 13 * 14 15 16 17 18 19 * 20 * 21 * 22 * 23 * 24 * 25 26 * 26 * 26 * 27 * 28 * PART NO.
HONDA GX240K1HA2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 58 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO. 2 3 4 5 8 10 * 11 * 12 * 14 * 15 * 16 * 19 20 21 * 24 * 27 PART NO. 16551ZE2000 16555ZE2000 16561ZE2000 16571ZE2000 16570ZE2W00 16571ZE2W00 16574ZE1000 16575ZE2W00 16578ZE1000 16581ZE2W00 16584883300 90013883000 90015ZE5010 90114SA0000 93500050280A 9405006000 PART NAME QTY. REMARKS ARM, GOVERNOR 1 ROD, GOVERNOR 1 SPRING, GOVERNOR 1 SPRING, THROTTLE RETURN 1 CONTROL ASSEMBLY ................................ 1 ..........
HONDA GX240K1HA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 60 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. 2 PART NO. 11400ZE2621 3 4 5 8% 9# 10 11 + * 12 + * 13 + * 14 * 15 * 16 * 17 18 * 19 20 * 21 * 22 * 23 11381ZE2801 15600ZG4003 15600735003 15625ZE1003 15625ZE1003 16510ZE2811 16511ZE2000 16512ZE2811 16513ZE2000 16531ZE2000 90473147000 90602ZE1000 90701HC4000 9410106800 957010803500 961006202000 961006204000 961006206000 961006302000 * PART NAME QTY. REMARKS COVER ASSY., CRANKCASE ..................... 1...........
HONDA GX240K1HA2ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 62 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 3 8 12 * PART NO. 13320ZE2611 13351ZE2010 961006206000 PART NAME CRANKSHAFT (L- TYPE) WEIGHT BALANCER BEARING, RADIAL BALL (6206) QTY. 1 1 1 REMARKS INCLUDES ITEM W/ * MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 64 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 1 2 3 6 7 8 * 9 10 11 12 13 14 * 15 16 PART NO. 12000ZE2834 15510ZE2043 16541ZE2010 90131896650 90446KE1000 91201890003 91353671003 9405010000 9410912000 9425110000 957010601200 961006202000 90013883000 34150ZH7003 PART NAME QTY. REMARKS CYLINDER ASSY., BALANCER + OIL ALERT ...... 1 .......... INCLUDES ITEMS W/ * SWITCH ASSY., OIL LEVEL 1 SHAFT, GOVERNOR ARM 1 BOLT, DRAIN PLUG 2 WASHER 8.2 X17X0.
HONDA GX240K1HA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 66 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 * 3 * 4 * 5 6 7 8 10 11 12 13 14 15 16 17 17 PART NO. 12200ZH9000 12204ZE2306 12205ZE2305 12216ZE2300 12251ZE2800 12310ZE2020 12391ZE2020 14775ZE2010 90014ZE2000 90042ZE2000 90047ZE2000 90441ZE2010 9430112200 950051100130M 957011008000 9807956846 9807956855 PART NAME QTY. REMARKS CYLINDER HEAD COMP. ....................................... 1 .......... INCLUDES ITEMS W/ * GUIDE, VALVE, OS, OPTIONAL 1 GUIDE, EX.
HONDA GX240K1HA2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 68 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. 1 2 3 4 5 7 9 PART NO. 16731ZE2003 19610ZE2010ZC 19631ZE2D00 32197ZH8003 36100ZE1015 90013883000 90684ZA0601 PART NAME CLIP, TUBE COVER COMP., FAN *NH1* BLACK SHROUD SUB-HARNESS SWITCH ASSY., ENGINE STOP BOLT, FLANGE 6X12, CT200 CLIP, WIRE HARNESS QTY. 1 1 1 1 1 6 1 REMARKS MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 70 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 2 4 7 8 PART NO. 19511ZE2000 28450ZE2W11 31100ZE2010 90201ZE3V00 90741ZE2000 PART NAME FAN, COOLING PULLEY COMP., STARTER, SCREEN GRID FLYWHEEL COMP. NUT, SPECIAL 16MM KEY, SPECIAL WOODRUFF 25X18 QTY. 1 1 1 1 1 REMARKS MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 72 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 PART NO. 18310ZE2W00 18320ZE2W01 18323ZE2W00 18330ZE2W00 18331ZE2810 18333ZE3800 18355ZE2010 18381ZE2W10 18381ZE2800 90013883000 90050ZE1000 90055ZE1000 90050ZE1000 9405008000 PART NAME MUFFLER PROTECTOR, MUFFLER PROTECTOR, EX. PIPE PIPE, EX. CAP, MUFFLER GASKET, EX.
HONDA GX240K1HA2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 74 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3 5 6 * 8 11 12 13 14 15 PART NO. 16854ZH8000 16955ZE1000 17510ZE2010ZD 17620ZH7023 17631ZH7003 17672ZE2W01 91353671003 9405008000 950014500360M 9500202080 957010802500 PART NAME QTY. REMARKS RUBBER SUPPORTER 107MM 1 JOINT, FUEL TANK 1 TANK COMP., FUEL *NH1*, BLACK 1 CAP COMP., FUEL FILLER .................................... 1 ..........
HONDA GX240K1HA2ENGINE — IGNITION ASSY. IGNITION COIL ASSY. PAGE 76 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2ENGINE — IGNITION ASSY. IGNITION COIL ASSY. NO. 1 2 6 8 11 PART NO. 30500ZE2023 30700ZE1013 31512ZE2000 36101ZE1010 90015883000 PART NAME COIL ASSY., IGNITION CAP ASSY., NOISE SUPPRESSOR GROMMET, WIRE WIRE, STOP SWITCH 370MM BOLT, FLANGE 6X28 QTY. 1 1 1 1 2 REMARKS MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 78 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 2 2 2 2 3 4 4 5 * 6 PART NO. 13010ZE2013 13011ZE2013 13012ZE2013 13013ZE2013 13101ZE2W00 13102ZE2W00 13103ZE2W00 13104ZE2W00 13111ZE2000 13200ZE2000 13200ZE2305 90001ZE8000 90551ZE1000 PART NAME QTY. REMARKS RING SET, PISTON, STD. 1 RING SET, PISTON, OS 0.25, OPTIONAL 1 RING SET, PISTON, OS 0.50, OPTIONAL 1 RING SET, PISTON, 0.75, OPTIONAL 1 PISTON, STANDARD 1 PISTON, OS 0.25, OPTIONAL 1 PISTON, OS 0.50, OPTIONAL 1 PISTON, 0.
HONDA GX240K1HA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 80 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 10 * 11 * 13 * 14 PART NO. 28400ZE2W01ZB 28410ZE2W01ZB 28421ZE2W01 28422ZE2W01 28441ZE2W01 28442ZE2W01 28443ZE2W01 28444ZE2W01 28461ZE2W02 28462ZE2W11 90004ZE2W01 90008ZE2003 PART NAME QTY. REMARKS STARTER ASSY., RECOIL *NH1*, BLK ............... 1 ......... INCLUDES ITEMS W/ * CASE COMP.
HONDA GX240K1HA2 ENGINE — GEAR REDUCTION ASSY. GEAR REDUCTION ASSY. PAGE 82 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — GEAR REDUCTION ASSY. GEAR REDUCTION ASSY. NO. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. 11500ZE2620 11521ZE2800 22103ZE2620 23220ZE2621 23710ZE2621 90401ZE2620 90402ZE2620 90473842000 90745ZE2600 91201890003 9430108140 957010802500 957010804000 961006206000 961006302000 PART NAME QTY. REMARKS COVER ASSY, REDUCTION CASE ............. 1 .......... INCLUDES ITEMS W/ GASKET, CHAIN CASE COVER 1 GEAR, PRIMARY DRIVE (17T) 1 COUNTERSHAFT 1 SHAFT, P.T.O.
HONDA GX240K1HA2 ENGINE — LABEL ASSY. LABEL ASSY. PAGE 84 — MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
HONDA GX240K1HA2 ENGINE — LABEL ASSY. LABELS ASSY. NO. 1 2 3 5 15 16 PART NO. 87521ZE2W01 87522ZE1810 87522ZH9000 87528ZE2810 87586ZH7W00 87532ZH8810 PART NAME EMBLEM, INTERNAL MARK, CAUTION, EXTERNAL LABEL, CAUTION MARK, CHOKE, EXTERNAL LABEL, FUEL CAUTION MARK, OIL ALERT QTY. 1 1 1 1 1 1 REMARKS MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
Effective: July 15, 2003 TERMS AND CONDITIONS OF SALE — PARTS Terms and Conditions of Sale STOW Construction Equipment PAYMENT TERMS Terms of payment for unit sales are 2% 15 days net 30 days from date of invoice unless otherwise specifically stated on our invoice. Parts invoices have terms of net 10 days. Minimum parts billing is $15.00 net. Applicable discounts will be computed on merchandise value only. Late charges will be assessed at prevailing rates.
NOTE PAGE MQ STOW MS20H/MS20E MIXER — PARTS & OPERATION MANUAL — REV.
PARTS AND OPERATION MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 ^^^^^*^^^^^^^^^^^^^^^^^^^^^^^^^*^6668 or 310-637-3284 SERVICE DEPARTMENT/TECHNICAL ASSISTANCE 800-478-1244 or 310-537-3700 FAX: 310- 537-4259 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 FAX: 310- 537-1173 MAIN 800-421-1244 or 310-537-3700 FAX: 310-537-3927 A D I V I S I O N O F M U LT I Q U I P I N C.