OPERATION AND PARTS MANUAL © COPYRIGHT 2003, MULTIQUIP INC. MODEL SDP-2/SDP-3 DIAPHRAGM PUMPS Revision #2 (11/16/03) STOW CONSTRUCTION EQUIPMENT PARTS DEPARTMENT: A DIVISION OF MULTIQUIP INC. POST OFFICE BOX 6254 CARSON, CA 90749 310-537-3700 • 888-252-STOW [888-252-7869] FAX: 310-537-1986 • FAX: 800-556-1986 E-MAIL: stow@multiquip.com • WWW: stowmfg.
PAGE 2 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310-631-5032 WARRANTY DEPARTMENT 800-421-1244, EXT. 279 FAX: 310-537-1173 310-537-3700, EXT. 279 SALES DEPARTMENT 310-661-4242 FAX: 310-604-9237 877-289-7869 (877-BUY-STOW) STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL— REV.
STOW SDP-2/SDP-3 — TABLE OF CONTENTS STOW SDP-2/SDP-3 Gasoline Powered Diaphragm Pumps HONDA GX120K1QX2 Engine Air Cleaner Assembly......................................... 40-41 Camshaft Assembly ........................................... 42-43 Carburetor Assembly ......................................... 44-45 Control Assembly ............................................... 46-47 Crankcase Cover Assembly ............................... 48-49 Crankshaft Assembly .........................................
PARTS ORDERING PROCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ ❒ ❒ Dealer account number Dealer name and address Shipping address (if different than billing address) Return fax number Applicable model number Quantity, part number and description of each part Specify preferred method of shipment: ✓ FedEx or UPS Ground Note: Unless otherwise indicated by customer, all ✓ FedEx or UPS Second Day or Third Day orders are treated as “Standard Orders”, and will ship within 24 hou
STOW SDP-2/SDP-3 — SPECIFICATIONS (PUMP/ENGINE) Table 1. Specifications (Pump) Pump Type SDP-2 Diaphragm Pump SDP-3 Diaphragm Pump Suction & Discharge Size 2.00 in. (50.8 mm.) 3.00 in. (76.2 mm.) Maximum Pumping Capacity 3,000 gallons/hour (11,340 liters/hour) 5,100 gallons/hour (19,320 liters/hour) 1 in. (25.4 mm) 2 in (50.8 mm) Max Lift 26 ft. (7.92 meters) 26 ft. (7.92 meters) Max. Head 51 ft. (15.54 meters) 51 ft. (15.54 meters) 140 lbs. (63 Kg.) 160 lbs. (72 Kg.) Max.
STOW SDP-2/SDP-3 — DIMENSIONS (PUMP) Figure 1. STOW SDP-2/SDP-3 Pump Dimensions Table 3. Dimensions MODEL A LENGTH B HEIGHT C WIDTH D DISCHARGE E SUCTION SDP-2 39.87 in. (101.1 cm.) 24.75 in. (62.86 cm.) 24.75 in. (62.86 cm.) 4.93 in. (12.52 cm.) 4.25 in. (10.80 cm.) SDP-3 39.87 in. (101.1 cm.) 23.68 in. (60.14 cm.) 29.25 in. (74.30 cm.) 5.25 in. (13.33 cm.) 5.43 in. (13.80 cm.) STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL— REV.
STOW SDP-2/SDP-3 — SAFETY MESSAGE ALERT SYMBOLS FOR YOUR SAFETY AND THE SAFETY OF OTHERS! Safety precautions should be followed at all times when operating this equipment. Failure to read and understand the Safety Messages and Operating Instructions could result in injury to yourself and others. This Owner's Manual has been developed to provide complete instructions for the safe and efficient operation of the STOW NOTE Model SDP-2 and SDP-3 Diaphragm Pumps.
STOW SDP-2/SDP-3 — SAFETY MESSAGE ALERT SYMBOLS Accidental Starting Respiratory Hazard ALWAYS place the engine ON/OFF switch in the OFF position when the pump is not in use. ALWAYS wear approved respiratory protection. Equipment Damage Messages Sight and Hearing hazard ALWAYS wear approved eye and hearing protection. WARNING To avoid injuries and damage to the equipment, ALWAYS read and understand contents of operation manual before operating equipment.
STOW SDP-2/SDP-3 — RULES FOR SAFE OPERATION ■ NEVER touch the hot exhaust manifold, muffler or cylinder. Allow these parts to DANGER: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only.
STOW SDP-2/SDP-3 — RULES FOR SAFE OPERATION ■ NEVER Run engine without air cleaner. Severe engine damage may occur. ■ ALWAYS read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment. ■ ALWAYS be sure the operator is familiar with proper safety precautions and operation techniques before using pump. ■ ALWAYS store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.
STOW SDP-2/SDP-3 — GENERAL INFORMATION APPLICATION The STOW Model SDP-2 and SDP-3 diaphragm pumps are designed to be used for de-watering applications. The suction and discharge ports on the SDP-2 use a 2-inch diameter opening, which allows the pump to pump at rate of approximately 3,000 gallons/hour (gph) or 11,340 liters/hour (lph).
STOW SDP-2/SDP-3 — PUMP COMPONENTS Figure 2 shows a typical application using the STOW SDP-2 or SDP-3 diaphragm pump. Please note that this pump is intended for the removal of clean water and water containing some debris and solids. Maximum size of solids should not exceed 1 inch (25 mm) in diameter. DO NOT set strainer on bottom of water bed. Placing the strainer above the water bed will prevent the pump from drawing in excessive amounts of sand and foreign debris.
STOW SDP-2/SDP-3 — BASIC ENGINE Figure 3. Engine Controls and Components INITIAL SERVICING 6. The engine (Figure 3) must be checked for proper lubrication and filled with fuel prior to operation. Refer to the manufacturers engine manual for instructions & details of operation and servicing. The engine shown above is a HONDA engine, operation for other types of engines may vary somewhat. Choke Lever – Used in the starting of a cold engine, or in cold weather conditions.
STOW SDP-2/SDP-3 — PRE-INSPECTION (ENGINE) CAUTION NEVER operate the pump in a confined area or enclosed area structure that does not provide ample free flow of air. 3. Insert and remove the dipstick without screwing it into the filler neck. Check the oil level shown on the dipstick. 4. If the oil level is low (Figure 5), fill to the edge of the oil filler hole with the recommended oil type (Table 5). Maximum oil capacity is 1.16 quarts (1.
STOW SDP-2/SDP-3 — PRE-SETUP (PUMP) Before Starting 1. Read safety instructions at the beginning of manual. Suction and discharge hoses are available from Multiquip. Contact your nearest dealer for more information. NOTE 2. Place pump as near to water as possible, on a firm flat, level surface. 3. To prime pump, remove fill cap (Figure 2) and fill pump casing with water. If the pump casing is not filled with water before starting, it will not begin pumping. 5.
STOW SDP-2/SDP-3 — PRE-SETUP (PUMP) Gear Reduction Oil (Transmission) 1. Remove the transmission oil level plug (Figure 6). If oil begins to seep out as the plug is being removed, then it can be assumed that the transmission oil is at the proper operating level. 2. If oil does not seep out as the oil level plug is being removed, then remove the transmission oil fill plug and fill with SAE 80/90 EP gear oil to the proper operating level. Transmission oil capacity is capacity is 1-1/4 pints (590 ml.).
STOW SDP-2/SDP-3 — INITIAL START-UP (ENGINE) CAUTION : 4. Place the choke lever (Figure 9) in the "CLOSED " position if starting a warm engine or the temperature is warm. DO NOT attempt to operate the pump until the Safety, General Information and Inspection sections of this manual have been read and thoroughly understood. This section is intended to assist the operator with the initial start-up of the trash pump.
STOW SDP-2/SDP-3 — INITIAL START-UP (ENGINE) 7. If the engine has started, slowly return the choke lever (Figure 14 ) to the “CLOSED” position. If the engine has not started repeat steps 1 through 6. Stopping The Engine Normal Shutdown 1. Move the throttle lever to the IDLE position (Figure 16) and run the engine for three minutes at low speed. Figure 16. Throttle Lever (Idle) Figure 14. Choke Lever (Closed) 2. After the engine cools, turn the engine ON/OFF switch to the “OFF” position (Figure 17). 8.
NOTE PAGE PAGE 20 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
STOW SDP-2/SDP-3 — MAINTENANCE (PUMP) Pump Vacuum Test Pump Cleaning CAUTION: After pumping water containing large amounts of dirt and debris, perform the following: DO NOT attempt to start the engine unless the pump has previously been primed with water. Severe pump damage will occur if pump has not been primed. To perform the pump vacuum test do the following: 1. Remove the pump fill cap (Figure 2), and fill the pump with water. 2.
STOW SDP-2/SDP-3 — MAINTENANCE (PUMP) NOTE Pressure reading may vary depending on altitude. See Tables 3 and 4 on page 12. Figure 19. Pump Vacuum Tester PAGE 22 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
STOW SDP-2/SDP-3 — MAINTENANCE (ENGINE) Engine Maintenance Perform engine maintenance procedures as referenced by Table 6 below: Table 6. Engine Maintenance Schedule DESCRIPTION (3) OPERATION BEFORE CHECK X FIRST EVERY MONTH 3 MONTHS OR OR 10 HRS. 25 HRS. EVERY 6 MONTHS OR 50 HRS. EVERY YEAR OR 100 HRS. EVERY 2 YEARS OR 200 HRS.
STOW SDP-2/SDP-3 — MAINTENANCE (ENGINE) Maintenance DANGER : Perform the engine maintenance procedures as indicated below: DAILY ■ Thoroughly remove dirt and oil from the engine and control area. Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the spring box and bellows for oil leaks. Repair or replace as needed. WEEKLY ■ Remove the fuel filter cap and clean the inside of the fuel tank. ■ Remove or clean the filter at the bottom of the tank.
STOW SDP-2/SDP-3 — PREPARATION FOR LONG -TERM STORAGE Pump Storage For storage of the pump for over 30 days, the following is required: z Drain the fuel tank completely. z Run the engine until the fuel is completely consumed. z Completely drain used oil from the engine crankcase and fill with fresh clean oil, then follow the procedures described in the engine manual for engine storage. z Remove the pump cover and clean inside of pump housing.
STOW SDP-2/SDP-3 — TROUBLESHOOTING (ENGINE) TABLE 7. ENGINE TROUBLESHOOTING SYMPTOM POSSIBLE PROBLEM SOLUTION Difficult to start Fuel is available but spark plug will not ignite. (Power available at high tension cable). Fuel is available but spark plug will not ignite. (Power NOT available at high tension cable). Fuel is available and spark plug ignites (compression normal). Fuel is available and spark plug ignites (compression low ). Ignition plug being bridge? Check ignition system.
STOW SDP-2/SDP-3 — TROUBLESHOOTING (ENGINE/PUMP) TABLE 7. ENGINE TROUBLESHOOTING (Continued) SYMPTOM POSSIBLE PROBLEM SOLUTION Operation not satisfactory Rotational speed fluctuates. Recoil star ter not working properly. Governor adjustment improper? Adjust governor to correct lever. Governor spring defective? Clean or replace ignition. Fuel flow erratic? Check fuel line. Air taken in through suction line? Check suction line. Dust in rotating par t? Clean recoil star ter assembly.
STOW SDP-2/SDP-3 — EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. NOTE Items Found In the “Remarks” Column The contents of this catalog are subject to change without notice. Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Where indicated, this shows that the corresponding part is utilized only with this specific model number or model number variant.
STOW SDP-2/SDP-3 — SUGGESTED SPARE PARTS STOW SDP-2/SDP-3 DIAPHRAGM PUMP 1 TO 3 UNITS WITH HONDA GX120K1QX2 ENGINE Qty. P/N Description 3 ............ 17210ZE0505 ....... ELEMENT AIR CLEANER DUAL 3 ............ 9807955846 .......... SPARK PLUG 1 ............ 17620ZH7023 ....... CAP, FUEL WITH GASKET 1 ............ 28462ZH8003 ....... ROPE STARTER 1 ............ 2022331 ................ DIAPHRAGM 2-INCH 1 ............ SP2726TPE .......... DIAPHRAGM 3-INCH 2 ............ 2023356 ................
STOW SDP-2 — WATERBOX & GROOVE ASSY. (2-INCH) WATERBOX & GROOVE ASSY. (2-INCH) PAGE 30 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
STOW SDP-2 — WATERBOX & GROOVE ASSY. (2-INCH) WATERBOX & GROOVE ASSY. (2-INCH) NO. PART NO. PART NAME 1 SP3354A1 SUCTION CONN & GROOVE PIN ASSY. 2 SP3322 2” FILL PLUG 3 SP3323 2” PLUG GASKET 4 SP3015 EXTRA HEAVY NIPPLE 5 2023812 3/8”X1-1/2” HEX SCREW 5A 2023800 3/8” LOCKWASHER 6 2021838 1/8”X3/8” SPRING PIN 7 2023358 VALVE WEIGHT 8 2023356 FLAP VALVE 9 2023357 VALVE BINDER 10 2021032 RD. HD. MACH. SCREW #10-32X1/2” 11 SP3351A1 WATERBOX & GROOVE PIN ASSY.
STOW SDP-2 — PUMP ASSY. (2-INCH) 2-INCH PUMP ASSY. PAGE 32 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
STOW SDP-2 — PUMP ASSY. (2-INCH) 2-INCH PUMP ASSY. NO. PART NO.
STOW SDP-3 — WATERBOX & GROOVE ASSY. (3-INCH) WATERBOX & GROOVE ASSY. (3-INCH) PAGE 34 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
STOW SDP-3 — WATERBOX & GROOVE ASSY. (3-INCH) WATERBOX & GROOVE ASSY. (3-INCH) NO. PART NO. PART NAME 1 SP3309A1 PIN, SUCTION CONN & GROOVE ASSY. 2 SP3322 PLUG, 2” FILL 3 SP3323 GASKET, 2” PLUG 4 SP3041 NIPPLE, EXTRA HEAVY 5 AO100500175 SCREW, 1/2”-13 X 1-3/4” HX 5A 2023800 3/8” LOCKWASHER 6 2021838 PIN, 1/8”X3/8” SPRING 7 SP3313 VALVE WEIGHT 8 SP3311N FLAP VALVE 9 SP3312 VALVE BINDER 10 2021032 RD. HD. MACH. SCREW #10-32X1/2” 11 SP3308A1 PIN, WATERBOX & GROOVE ASSY.
STOW SDP-3 — PUMP ASSY. 3-INCH PUMP ASSY. PAGE 36 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
STOW SDP-3 — PUMP ASSY. 3-INCH PUMP ASSY. NO. PART NO.
STOW SDP-2/3 — AXLE, HANDLE, ENGINE MTG. AND BUMPER ASSY. AXLE, HANDLE, ENGINE MOUNTING AND BUMPER ASSY. PAGE 38 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
STOW SDP-2/3 — AXLE, HANDLE, ENGINE MTG. AND BUMPER ASSY. AXLE, HANDLE, ENGINE MOUNTING AND BUMPER ASSY. NO. PART NO.
HONDA GX120K1QX2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. PAGE 40 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — AIR CLEANER ASSY. AIR CLEANER ASSY. NO. 1 2 3 * 4 5 * 7# 8# 9 12 13 14 PART NO. 16271ZE1000 17210ZE0505 17218ZE0505 17230ZE0820 17232891000 17238ZE0010 17239ZE1000 17410ZE0030 90325044000 957010602000 9405006000 PART NAME QTY. REMARKS GASKET, ELBOW 1 ELEMENT, AIR CLEANER (DUAL) ................... 1............. INCLUDES ITEMS W/ * FILTER, OUTER 1 COVER, AIR CLEANER (DUAL) 1 GROMMET, AIR CLEANER 1 COLLAR, AIR CLEANER 2 COLLAR B, AIR CLEANER 1 ELBOW, AIR CLEANER ..................
HONDA GX120K1QX2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. PAGE 42 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — CAMSHAFT ASSY. CAMSHAFT ASSY. NO. 1 2 3 4 5 6 * 7 8 9 10 11 12 13 14 15 PART NO. 14100ZE0812 14410ZE0010 14431ZE1000 14441ZE1010 14451ZE1013 14568ZE1000 14711ZF0010 14721ZF0000 14751ZF1000 14771ZE1000 14773ZE1000 14781ZE1000 14791ZE0010 90012ZE0010 90206ZE1000 PART NAME QTY. REMARKS CAMSHAFT ASSEMBLY .................................. 1............. INCLUDES ITEMS W/ * ROD, PUSH 2 ARM, VALVE ROCKER 2 LIFTER, VALVE 2 PIVOT, ROCKER ARM 2 SPRING, WEIGHT RETURN 1 VALVE, IN.
HONDA GX120K1QX2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. PAGE 44 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — CARBURETOR ASSY. CARBURETOR ASSY. NO. 1 * 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 10 * 11 * 12 * 13 14 15 16 17 18 * 19 * 20 * 21 * 22 * 23 * 24# 25 25 25 * 26 * PART NO.
HONDA GX120K1QX2 ENGINE — CONTROL ASSY. CONTROL ASSY. PAGE 46 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — CONTROL ASSY. CONTROL ASSY. NO. 3 4 5 6 7 8# 9# 10# 11# 12# 14# 15# 16# 18 19 20 21# 24# 25# 26 PART NO. 16500ZH7820 16551ZE0010 16555ZE0000 16561ZE0020 16562ZE0020 16571ZH7000 16574ZE1000 16575ZH8000 16576891000 16578ZE1000 16580ZH7810 16584883300 16592ZE1810 90013883000 90015ZE5010 90022888010 90114SA0000 93500050250H 93500050160A 9405006000 PART NAME QTY. REMARKS CONTROL ASSEMBLY (REMOTE) ........... 1 ............
HONDA GX120K1QX2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. PAGE 48 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — CRANKCASE COVER ASSY. CRANKCASE COVER ASSY. NO. 1 2 3 4 7# 8+ 9 10 * 11 * 12 PART NO. 11300ZE0640 11381ZH7800 15600ZE1003 15600ZG4003 15625ZE1003 15625ZE1003 90015883000 91001878003 91203ZE0003 9430108140 PART NAME QTY. REMARKS COVER ASSEMBLY, CRANKCASE (W- TYPE) ....... 1 .............. INCLUDES ITEMS W/ * GASKET, CASE COVER 1 CAP ASSEMBLY, OIL FILLER ................................ 1 .............. INCLUDES ITEMS W/# CAP ASSEMBLY, OIL FILLER ................................
HONDA GX120K1QX2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. PAGE 50 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — CRANKSHAFT ASSY. CRANKSHAFT ASSY. NO. 1 2 PART NO. 13310ZE0601 90745ZE1600 PART NAME CRANKSHAFT, H-TYPE KEY 4.78 X4.78X38 QTY. 1 1 REMARKS STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL— REV.
HONDA GX120K1QX2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. PAGE 52 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — CYLINDER BARREL ASSY. CYLINDER BARREL ASSY. NO. 2 3 4 5# 6# 7# 8 9 10 11 12 13 14 * 15 * 16 17 18 19 20 PART NO. 120A0ZH7810 15510ZE1033 16510ZE1000 16511ZE1000 16512ZE1000 16513ZE1000 16531ZE1000 16541ZE1000 90131ZE1000 90451ZE1000 90601ZE1000 90602ZE1000 91001878003 91202ZE6003 91353671003 9405010000 9410106800 9425108000 957010601200 PART NAME QTY. REMARKS CYLINDER ASSEMBLY (OIL ALERT) ........1 ............ INCLUDES ITEMS W/ * SWITCH ASSEMBLY, OIL LEVEL 1 GOVERNOR ASSEMBLLY .
HONDA GX120K1QX2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. PAGE 54 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — CYLINDER HEAD ASSY. CYLINDER HEAD ASSY. NO. 1 2 * 3 * 4 + * 5 6 6 7 8 9 10 11 12 14 15 PART NO. 12210ZH7000 12204ZE1306 12205ZE1315 12216ZE5300 12251ZH7800 12310ZE1000 12310ZE1010 12391ZE1000 15721ZH8000 90013883000 90043ZE1020 90047ZE1000 9430110160 957230805500 9807955846 PART NAME QTY. REMARKS CYLINDER HEAD .................................................. 1 .............. INCLUDES ITEMS W/ * GUIDE, VALVE (OS) OPTIONAL 1 GUIDE, EX. VALVE (OS) OPTIONAL ................... 1 ..
HONDA GX120K1QX2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. PAGE 56 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — FAN COVER ASSY. FAN COVER ASSY. NO. 1 2 3 4 5 6 7 7 8 9 10 11 13 PART NO.
HONDA GX120K1QX2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. PAGE 58 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — FLYWHEEL ASSY. FLYWHEEL ASSY. NO. 1 2 4 5 7 PART NO. 13331357000 19511ZE0000 28451ZH8003 31100ZE0010 90201878003 PART NAME KEY, SPECIAL WOODRUFF 25X18 FAN, COOLING PULLEY, STARTER FLYWHEEL NUT, SPECIAL 14MM QTY. 1 1 1 1 1 REMARKS STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL— REV.
HONDA GX120K1QX2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. PAGE 60 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — FUEL TANK ASSY. FUEL TANK ASSY. NO. 1 2 3 5 6 * 11 12 13 14 15 PART NO. 16854ZH8000 16955ZE1000 17510ZE0020ZD 17620ZH7023 17631ZH7003 91353671003 9405006000 950014500360M 9500202080 90004ZH7003 PART NAME QTY. REMARKS RUBBER, SUPPORTER 107MM 1 JOINT, FUEL TANK 1 TANK, FUEL *NH1* (BLACK) 1 CAP, FUEL FILLER ..................................... 1 .......... INCLUDES ITEMS W/ * GASKET, FUEL FILLER CAP 1 O- RING 13.5X1.5 (ARAI) 1 NUT, FLANGE 6MM 2 BULK HOSE, FUEL (4.5X3000) (4.
HONDA GX120K1QX2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. PAGE 62 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — IGNITION COIL ASSY. IGNITION COIL ASSY. NO. 1 2 8 PART NO. 30500ZE1033 30700ZE1013 90121952000 PART NAME COIL ASSEMBLY, IGNITION CAP ASSEMBLY, NOISE SUPPRESSOR BOLT, FLANGE 6X25 QTY. 1 1 2 REMARKS STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL— REV.
HONDA GX120K1QX2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. PAGE 64 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — MUFFLER ASSY. MUFFLER ASSY. NO. 1 3 7 10 13 PART NO. 18310ZF1000 18320ZF1H01 18381ZH8800 90050ZE1000 94001080000S PART NAME MUFFLER PROTECTOR, MUFFLER GASKET, MUFFLER SCREW, TAPPING 5X8 NUT, HEX. 8MM QTY. 1 1 1 4 2 REMARKS STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL— REV.
HONDA GX120K1QX2 ENGINE — PISTON ASSY. PISTON ASSY. PAGE 66 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — PISTON ASSY. PISTON ASSY. NO. 1 1 1 1 2 2 2 2 3 4 4 5 * 6 PART NO. 13010ZK7V01 13011ZE6013 13012ZK7V01 13013ZK7V01 13101ZH7000 13102ZH7000 13103ZH7000 13104ZH7000 13111ZE0000 132A0ZE0000 13200ZE0000 90001ZE1000 90551ZE0000 PART NAME QTY. REMARKS RING SET, PISTON (STANDARD) 1 RING SET, PISTON (OS 0.25), OPTIONAL 1 RING SET, PISTON (OS 0.50) , OPTIONAL 1 RING SET, PISTON (OS 0.75), OPTIONAL 1 PISTON, STANDARD 1 PISTON, OS 0.25 1 PISTON, OS 0.50 1 PISTON, 0.
HONDA GX120K1QX2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. PAGE 68 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — RECOIL STARTER ASSY. RECOIL STARTER ASSY. NO. 1 2 * 3 * 4 * 5 * 6 * 7 * 8 * 9 * 10 * 11 * 12 PART NO. 28400ZH8013ZB 28410ZH8003ZB 28420ZH8013 28422ZH8013 28433ZH8003 28441ZH8003 28442ZH8003 28443ZH8003 28461ZH8003 28462ZH8003 90003ZH8003 9008ZE2003 PART NAME QTY. REMARKS STARTER ASSY., RECOIL *NH1* (BLACK) .......... 1 ..............
HONDA GX120K1QX2 ENGINE — GASKET KIT ASSY. GASKET KIT ASSY. NO ARTWORK AVALIBLE PAGE 70 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — GASKET KIT ASSY. GASKET KIT ASSY. NO. 2 3 * 4 * 5 * 6 * 7 * 8 * PART NO. 06111ZH7405 11381ZH7800 12251ZH7800 12391ZE1000 16212ZH7800 16221ZH8801 18381ZH8800 PART NAME QTY. REMARKS GASKET KIT ......................................................... 1 .............. INCLUDES ITEMS W/ * GASKET, CASE COVER 1 GASKET, CYLINDER HEAD 1 GASKET, CYLINDER HEAD COVER 1 GASKET, INSULATOR 1 GASKET, CARBURETOR 1 GASKET, MUFFLER 1 STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL— REV.
HONDA GX120K1QX2 ENGINE — LABELS ASSY. LABELS ASSY. PAGE 72 — STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL — REV.
HONDA GX120K1QX2 ENGINE — LABELS ASSY. LABELS ASSY. NO. 1 3 4 6 PART NO. 87521ZH7020 87522ZH9000 87528ZE1810 87532ZH8810 PART NAME EMBLEM LABEL, CAUTION MARK, CHOKE MARK, OIL ALERT (E) QTY. 1 1 1 1 REMARKS STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL— REV.
Effective: July 15, 2003 TERMS AND CONDITIONS OF SALE — PARTS Terms and Conditions of Sale STOW Construction Equipment PAYMENT TERMS Terms of payment for unit sales are 2% 15 days net 30 days from date of invoice unless otherwise specifically stated on our invoice. Parts invoices have terms of net 10 days. Minimum parts billing is $15.00 net. Applicable discounts will be computed on merchandise value only. Late charges will be assessed at prevailing rates.
NOTE PAGE STOW SDP-2 / SDP-3 DIAPHRAGM PUMP — PARTS MANUAL— REV.
OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 FAX: 800-672-7877 310-537-3700 FAX: 310-637-3284 SERVICE DEPARTMENT 800-478-1244 FAX: 310-537-4259 310-537-3700 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310-631-5032 WARRANTY DEPARTMENT 800-421-1244, EXT. 279 FAX: 310-537-1173 310-537-3700, EXT.